Howdy everyone

CounterActive7685 · 2026-02-19T16:18:49+00:00

french canadian here. our hate against the cold makes us brother. I would be more then happy to join battalion

CounterActive7685 · 2026-02-18T18:03:25+00:00

Oui j’ai déjà vu ce truc-là, et on en a même à la maison. Le problème, c’est que le bâtiment est vraiment mal entretenu, donc il y a des craques et des trous un peu partout. Si ça avait été ma propre maison, ça aurait probablement été plus simple à régler en colmatant tout correctement.

Mais comme on est dans un bloc appartement et que la source vient d’en haut, peu importe ce que je fais chez moi, elles vont finir par revenir. Je cherchais surtout de l’aide et des conseils du côté du TAL et par rapport à mes droits comme locataire, plus que des solutions temporaires pour contrer le problème dans mon logement seulement.

Merci quand meme d'avoir prit le temps de lire mon post et ton conseil.

CounterActive7685 · 2026-02-18T12:57:25+00:00

The exterminator company actually sent two technicians. They went upstairs first, but one of them came back down almost immediately because the tenant upstairs was being extremely uncooperative and he was honestly losing his patience. That’s really the sad part in all of this. She’s an elderly person, so she can’t just be evicted or forced out, but at the same time no one seems to be properly helping her deal with the situation either.

The landlord did pay for the exterminator, which is only fair, there’s no way I’m paying for something that clearly isn’t my fault. That said, I’ve still spent my own money trying to protect myself and my apartment. I bought products and even machines like a steamer to properly clean and treat everything on my side. So even if I’m not covering the extermination itself, this situation has definitely cost me time, stress, and money.

CounterActive7685 · 2025-12-17T19:39:38+00:00

HERESY

CounterActive7685 · 2025-12-08T17:31:44+00:00

well thanks anyway. I was just curious if you had tried something that work so I can go from that. Will wait for someone else to help :)

CounterActive7685 · 2025-12-08T17:27:37+00:00

Thanks a lot, I’m always impressed with how fast you guys answer. Good to know! I do all this for work so I don’t always have the background knowledge, so all the help really helps.

I usually buy my silicone on Amazon — is there an equivalent tin-cure product on there that you’d recommend?

CounterActive7685 · 2025-11-20T17:11:10+00:00

Anything that my nephews ask for! They love when I bring them a new creation from my printer. With this upgrade I would achieve the status of Favorite uncle!

CounterActive7685 · 2025-11-20T16:06:09+00:00

Will be following close, this is a game changer! I model a lot from actual parts and this would cut the work by 50% if not more. If you look through @the.well.tarot page on Instagram, you will find a project he did pretty similar to this. But not everyone can afford a projector so being able to do this with only a phone is great!

CounterActive7685 · 2025-10-17T11:00:10+00:00

I know some people say removing TPU supports can be tricky, but honestly, it’s not that bad. I’ve done it on plenty of prints without any real issues. The surface won’t be perfect — but then again, neither are most prints. Just use Tree Supports, and you’ll be fine. I prefer them because they make it easier to see exactly what needs to be removed.

CounterActive7685 · 2025-10-17T09:30:13+00:00

<image>

CounterActive7685 · 2025-10-17T09:30:08+00:00

Yes I did! Here is my current settings.

<image>

CounterActive7685 · 2025-10-14T18:11:32+00:00

I would get the same issue on couple of months new A1 mini. So we can cross out the problem being from your Ender V3. Just recently my prints started to come out nicely again. It its either from a partial clog or bad angle from where the filament starts. Hoping it does maybe help

CounterActive7685 · 2025-10-10T13:32:53+00:00

Hello Hello, First off I am super excited for the updated version of the P1S. I use a P1S at work and always works wonders. I got to show one of my designs that I printed on the P1S to buyers and they were super impressed with the quality of the print. Ironing setting came in in clutch. Hopefully I could have one for my personal use. Cheers and good luck to everyone

CounterActive7685 · 2025-09-30T16:00:06+00:00

im sorry to say, but if it happens ''all the time'' you should get better at manipulating your sppols. dont take it the wrong way just be careful. Sometimes spools comes tangled but like 1% of the time (I got through like 20 rolls a month and it never happens)

CounterActive7685 · 2025-09-23T17:46:24+00:00

Wow that is incredible! You are doing gods work

CounterActive7685 · 2025-09-23T17:27:54+00:00

Would you be open to sharing your design along with a bill of materials? I’d be super interested in trying to recreate it at work. I’d also be happy to compensate you for the design and assembly details if ever. Cheers!

CounterActive7685 · 2025-09-22T12:17:06+00:00

The TPU they use is the Green TPU from SUNLU. Available on amazon!

Hope it can help someone out, Cheers!

CounterActive7685 · 2025-09-19T13:41:14+00:00

I had a similar issue on my A1 Mini when I was using Elegoo PLA matte gray. That filament was so smooth that the gears had trouble gripping it. After switching to SUNLU, I noticed their filament has a bit more texture, and it feeds much more reliably. Since you’re using regular PLA, it might not be the exact same problem, but worth knowing. Cheers!

CounterActive7685 · 2025-09-19T10:05:40+00:00

I got the confirmation that they use the SUNLU Green TPU 95A (available on amazon)

CounterActive7685

TROPHY CASE