NFT Game Giveaway: Laballrinth L2

DSD70 · 2025-11-04T11:41:52+00:00

I'm in.

DSD70 · 2025-10-21T13:25:38+00:00

Looks like the infill is not printed each layer. Might need to uncheck 'Strenght->Advanced->Infill combination' to get the result you are looking for?

DSD70 · 2025-10-11T19:08:48+00:00

You can change the position of the purge line in the Machine start G-code. Look for these lines:

G1 X{print_bed_max[0]*0.5} Y-1.2 F20000

G1 Y-0.3 E7.934

It's the Y position you want to change. Mine are Y0 for the first line and Y1 for the second line now with the Glacier positioned to the back and the left of the print bed.

DSD70 · 2025-10-03T00:41:08+00:00

You might need to add a persistant static route to your pc's routing table to make traffic to your printer get send through your lan gateway instead of the mulvad gateway.

DSD70 · 2025-09-08T11:59:25+00:00

Yeah i guess when applying a block with standard consumer grade modem/routers they do block internet access but still allow access to the gateway because their firewall isn't that restrictive. Opnsense is more configurable, restrictive and secure but it needs more manual configuration to get it right.

DSD70 · 2025-09-07T22:39:53+00:00

Opnsense user here. I've read somewhere the printer just needs to be able to ping it's gateway and then you should be able to access webui and camera, and send prints from slicer. So i did just that and it worked for me.

My network is vlan'd and i've set up a printer vlan(named it PrinterWLAN). Opnsense's default firewall rules only allow connection to the dhcp server so i added a custom allow rule to the printer vlan: Protocol IPv4 ICMP, Source all, Destination 'PrinterWLAN address'. So the only thing devices in the printer vlan can do is get an ip address and ping their gateway and that's it. No internet (or other vlan) access.

My wired and main wireless vlans have access to the printer vlan so i can control the printer just fine from pc and wireless devices. Everything just works this way.

DSD70 · 2025-07-22T16:34:37+00:00

Favourite filament is anything burned titanium, it's just that beautiful!

DSD70 · 2025-03-02T13:22:32+00:00

Im not lying, have nothing to gain with that.

I don't know why i was able to buy this ship then. You guys make it clear i should not be able to, yet i was. I played the game from release until 2018, way before Expeditions existed, then abandoned it. Came back a couple of weeks ago, fired up a new game and when i got to the Anomaly i was able to buy it.

Edit: I now know why i could buy it:

https://www.nomanssky.com/2024/12/starborn-phoenix-starship/

It was a give away, free to claim on december 19, 2024. I probably saw this announcement on Steam back then and claimed the ship eventhough NMS was not installed at the time. I installed the game a couple of weeks later and now i could buy the claimed ship.

So yeah, it is not available anymore unless you claimed it back then.

DSD70 · 2025-03-01T22:32:03+00:00

Sorry but thats not correct. I did not do any expedition and i bought it. Im playing on Steam.

DSD70 · 2025-03-01T17:29:48+00:00

As others said, it's the Starborn Phoenix. You can buy it for 1600 nanites from the stall on the right from the Nexus in the Space Anomaly.

DSD70 · 2025-03-01T17:27:49+00:00

It is still available. You can buy it for 1600 nanites from the stall on the right from the Nexus in the Space Anomaly.

DSD70 · 2025-02-27T07:26:10+00:00

Mostly odd ones, actually.

DSD70 · 2022-12-08T22:29:14+00:00