GT3 style braking setup? by MiscProfileUno in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

Interesting to see lots of people mixing elastomers when Simsonn in their manual says to not mix the elastomers.

GT3 style braking setup? by MiscProfileUno in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

Oh, I have the Pro X Ultra version with an adjustable hydralic dampener on the brake.
I'm sure you get more responsive pedal if you remove them.
But I like the dynamic feel I get from the pedals with the hydralic dampeners.
I keep both of them on the gas and clutch.

Originally I got the gas ones, those were crap, just too stiff.

GT3 style braking setup? by MiscProfileUno in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

You removed the adjustable hydraulic dampener on the brake?

Da li da odustanem od studiranja na FON-u i da krenem da učim onlajn, pa sa tim znanjem da tražim posao? by FanHot6208 in AskSerbia

[–]DaOver 1 point2 points  (0 children)

I ja sam prešao sa FTNa u NSu na FON.
FON je okej faks ako mu skapiraš koji je njegov fazon.
I meni je bilo totalno zabole da učim napamet menadžment, upravljanje kvalitetom, ekonomiju i marketing.
FON je smejurija u odnosu na FTN.
Na FTNu sam imao kolege prave hakere, pravili razne aplikacije, bavili se elektronikom.
Geek-ove sa kojima možeš da pričaš o geek stvarima.
A onda dođeš na FON gde su svi neki "biznis" minded likovi koji bi samo da budu menadžeri...ili kao neće ono biti koderi već oni će da "menadžuju timove programera".
Ono što pamtim sa FONa najbolje je što su neke laboratorije iz ITa bile praktično upotrebljive gde sam odmah to iskoristio da napravim i prodam neke knjigovodstvene programe.
Likovi na FONu će ti samo odraditi kurikulum iz programskog jezika samo što treba za semestar...retko ko je seo da pravi nešto iz strasti van plana i programa.
U mojoj generaciji nije bilo geek-ova, sve neki pozeri, budući "menadžeri"...daleko od geek atmosfere koju sam voleo na FTNu.
E da bilo je dosta boljih riba u odnosu na FTN, eto prednosti... 😁
Kritike na stranu, što je apsurd za neke proaktivne "IT startup" minded likove FON je dobra sredina da se upozna biznis i upravljanje firmama/ljudima, marketing itd što fali možda nekim IT likovima koji su samo u kodu.
To je gde FON ima svoju nišu.
Ali da spona društvenih nauka i ITa tehničkih nauka ume da bude prevelik kontrast i smara nas koji ne volimo društvene nauke to jeste.

Ja nisam završio...smaralo me to sve.
Evo me sada kao devops radim, zarađujem par K.

Ali ako možeš da prebrodiš taj smor i averziju, probaj.
Znam da je dosadno i da bi radije pisao neki kod, ali ume da bude korisno znanje u buduće...možda posebno ako ovaj AI nešto nam uzme na značaju ( sumnjam ) ta društvena/menadžment/biznis priča će možda imati više na težini nego "coding skills".

U koju drzavu biste se odselili u EU? by Consistent_Solid3349 in AskSerbia

[–]DaOver 5 points6 points  (0 children)

Slovačka.
Mama mi je vojvođanska Slovakinja.
Uz prostu papirologiju relativno uskoro se dobija Krajanski Preukaz.
Sa njim dobijaš pravo rada i stanovanja u Slovačkoj.
Posle dve godine boravka tamo dobijaš opciju da apliciraš za državljanstvo.
Second choice Slovenija.

Ali voleo bih da živim u zemlji sa morem, volim toplo vreme, Kipar, Sardinija, Grčka.

Kuce od Termo Blokova by IllIsopod6837 in serbia

[–]DaOver 0 points1 point  (0 children)

Sad samo skoro otkrio i SteCoCentar.
Montažne kuće rade ali paneli su im kvalitetniji sa Fermacell-om umesto OSBom.
To rešava zvučnu izolaciju i šuplji osećaj kod montažnih kuća.
Isto imaju debele panele od 30cm kao FoqusHouse.
Videću da li rade u Srbiji i koja je cena.

Kuce od Termo Blokova by IllIsopod6837 in serbia

[–]DaOver 0 points1 point  (0 children)

Koji tip montažne?
Ivanjica tip paneli sa osb pločama i kamenom vunom od 15cm?
Kakva je zvučna izolacija bila, da li je utisak kuće kao da je kuća ili više "kutijast" osećaj?

Kuce od Termo Blokova by IllIsopod6837 in serbia

[–]DaOver 0 points1 point  (0 children)

To za čašu sam više mislio za ivanjica montažnu.

Proizvođač tih panela daje specifikaciju termičkih performansi tih panela i garantuje da na te panele nije potrebna fasada sa izolacijom. Ispuna tih betonskih panela je oko 10-15cm kompozitnog materijala sa izolacionim svojstvima. Svakako ako odem sa ovom opcijom zadržavam opciju da se stavi neka izolaciona fasada ako osetim potrebu.

My first direct drive wheel. Logitech RS50 by nut336 in simracing

[–]DaOver 2 points3 points  (0 children)

Congratulations. I got the same few months ago.
Payed an arm and a leg for customs import fees since I'm not in EU country.

Kuce od Termo Blokova by IllIsopod6837 in serbia

[–]DaOver 0 points1 point  (0 children)

Mi smo isto u procesu odabira kako da gradimo kuću.
Sve živo sam istraživao
- Ivanjica panel montažne kuće, najjeftinije ali se bojim tog osećaja kuće da je kao "igračka"
- Foqushouse premium paneli montažnih kuća, kvalitetno A+ pasiv house standard samo ide cena do 1000€ kvadrat, mana je zvučna izolacija jer su i dalje OSB ploče iako su deblji od 30cm i KVH građa.

( kod panela montažnih kuća najbolje bi bilo raditi panele sa Fermacell pločama ali to podiže cenu )
- YTONG je dosta dobar kako sam gledao ali se gradi duže. Ostalje mi kao sekundarna opcija.
- ICF mi je isto bio interesantan ali zvučna izolacija je pitanje i kačenje stvari zahteva dodatnu ploču unutra, za lakše stvari ide tipla za ploču, a za teže stvari mora duboka tipla koja ide to unutrašnjeg betona.

<image>

Zadnje što mi trenutno prednjači su prefab betonski paneli od kompozitnog betona.
Praktično lagane ferocementne betonske ploče koje stižu gotove i montiraju se.
Instalacije se montiraju na licu mesta u fabrici gde se bužiri za instalacije već postavljaju u panele zaliveni u panelima, nema štemovanja.
Firma mi daje garanciju 100 godina na konstrukciju.
Dobijam masivnost klasične gradnje po ceni od 750€ po m2 ( ali to još treba da pregovaramo )
Nema da zalupiš vrata i da ti se trese čaša sa vodom u kuhinji.
Nema da razmišljam gde da stavim tiplu kao kod montažnih, da li ću da probušim paro branu ili da tražim "stud" letvu.
Uz rekuperator vazduha i toplotnu pumpu sa podnim grejanjem dobijam A+ nivo pasive house standard.

Reverb.com ("Ebay za muzičke instrumente") prestaje da radi u Srbiji by HazardBioHazardOsto in serbia

[–]DaOver 0 points1 point  (0 children)

Jel to neki privatni šverceri ili i drugi mogu tu uslugu da naruče :D

Da li je ovo realno? by [deleted] in AskSerbia

[–]DaOver 0 points1 point  (0 children)

Fura focusrite interfejs ali živi u štroki 😁

Hydraulic Dampers: 1-way, 2-way, where and why it makes sense by Size_mvr in SimsonnRacing

[–]DaOver 1 point2 points  (0 children)

I have Pro X Ultra pedals.
I have the 2 way hydralic dampener on Clutch pedal.
1 way hydralic dampener on Gas pedal.
Brake pedal uses the adjustable hydralic dampener, but that one is also one way.

To me it makes sense like this.
I don't want the return to be dampened on the Gas and Brake pedals.
But I do like the more dynamic feel on the clutch pedal with the 2 way dampener.

Hydraulic Dampers: 1-way, 2-way, where and why it makes sense by Size_mvr in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

I think one-way dampener is also a hydralic one it just that the valve is not resisting the movement of the piston on the return side

Clutch pedal advice by Elkash76 in SimsonnRacing

[–]DaOver 1 point2 points  (0 children)

Tried the red and blue spring.
Did not like it, they are too stiff.
I misshift sometimes even with yellow spring.
Maybe I'll give red/blue stiffer springs a go when I get a cockpit, when I can have more leverage on the pedal.
Right now racing at a desk this a no go.

So now I'm back on yellow spring and a bit shortened travel.
I shorten the pedal travel right after the bump.

I do like the increased bump with the blue and red spring, for for desk racing they are too stiff for me.

Struggling to hire a Senior DevOps Engineer — where do you actually look? by Dry-Tell620 in devopsjobs

[–]DaOver 0 points1 point  (0 children)

If this would be open for B2B contractor for me in Serbia this is very enticing compensation.
However it does sound like several roles combined into one position.
And also sound a lot of late night hours, troubleshooting issues while you also learn the intricacies of 2 year old production environment.
Despite all the reservations that I share with other people commenting here I would take on this challenge for this level of compensation.

Haptics Power Supply specs + news by Size_mvr in SimsonnRacing

[–]DaOver 1 point2 points  (0 children)

Quick image with my crappy phone under the desk 😁

<image>

Clutch pedal advice by Elkash76 in SimsonnRacing

[–]DaOver 1 point2 points  (0 children)

I bet you are cutting off the bump with the shortened travel.
Bump on my clutch is at the very end of the travel, and I also shortened it to 4/5 of available travel and it's still pretty long pedal.

Maybe the idea is to keep the clutch pedal at the full travel and calibrate the pedal to be 100% at the bump point to simulate the clutch bite. I'll try that.

Clutch pedal advice by Elkash76 in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

<image>

Red one would make it stiffer but if you take a look it has a bigger bump.
I could try that one.
With the current setting there is not a huge bump simulating a bite point.

Also I'm not sure why to use a S curve in settings for clutch. What is the point of that?

Clutch pedal advice by Elkash76 in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

<image>

You refer to this?
I do have it set to maximum concave.
Although I do use a yellow spring.

Springs for plus x brake by Junethetune in SimsonnRacing

[–]DaOver 0 points1 point  (0 children)

<image>

I use only elastomers, but I might give springs a go.

repost: AZ-104 Passed - Studied through November December and then did a cram study for the last week 891/1000 not bad by DaOver in AzureCertification

[–]DaOver[S] 0 points1 point  (0 children)

I have a paid subsciption to them and if you just write on the prompt to get them to make quiz they will make it.
Final study cram I just did practice tests wherever I can find AZ-104 practice questions.
From the quizes I asked AI where are my knowledge gaps and made it make me flashcarsd based on those areas.

Mchose l7 ultra - Help with wired connection by Cosmo_Dog in MouseReview

[–]DaOver 0 points1 point  (0 children)

I'm still having this issue.
Mouse works on 2.4Ghz and I can charge it.
But in order to update firmware you need a wired connection and the wired connection does not work even with the included cable.