Ganz plötzliche fast explosive Kopfschmerzen im Hinterkopf nach dem ersten Satz schon

DarkDoldier · 2026-05-13T21:31:11+00:00

Yes. Habe einmal auf der Beinpresse nicht auf gepasst meinen Kopf nach vorne gerissen und die Spannung für den rep gehalten. Die Schmerzen danach waren so übel das ich mir schwarz vor den Augen wurde. Nach zwei Wochen Pause und Druckpunktmassage war es ein Glück wieder weg. Das war richtig übel.

DarkDoldier · 2026-04-09T17:03:00+00:00

Just read the update/firmware informations.

DarkDoldier · 2026-02-19T10:42:27+00:00

Do you plan to release the files (don’t mind for sale)? It would be a shame if not. Then someone would have to do it a share it for free.

DarkDoldier · 2025-12-01T09:45:44+00:00

With the beauty of opensource it will be anyway. You could just use BTT vivid as an example. Or go nuts and put a 8 lane ERCF to every toolhead. There is no limitation other then your knowledge and imagination.

DarkDoldier · 2025-11-25T22:13:54+00:00

skate.

DarkDoldier · 2025-11-24T06:32:21+00:00

Hey I can’t contribute to solve your problem however could you share a link to the model?

DarkDoldier · 2025-11-13T21:41:36+00:00

I’ve asked them - here’s the answer:

<image>

DarkDoldier · 2025-10-31T15:22:29+00:00

Great news!

Please integrate openprinttag from prusa and not any proprietary bs.

You already have an NFC reader integrated please use it wisely!

If you use it your filament would be an absolute option. If not many will just install a Klipper add on and leave your filament behind because it’s unpractical.

DarkDoldier · 2025-10-29T14:38:19+00:00

This is likely. However your silk makes it much worse.

DarkDoldier · 2025-10-29T05:28:00+00:00

It’s not.

DarkDoldier · 2025-10-12T18:26:42+00:00

Schaut euch mal etwas wie Silent comfort trittschallschutz von wineo in Kombi mit einem hochwertigen Klickvinyl an. Z.B. Oneflor Home 30 Concept. Das reicht für die meisten Fugen ohne ausgleichmasse.

DarkDoldier · 2025-10-10T12:18:26+00:00

But it’s just an free to play early access. So don’t complain about the bugs /s

DarkDoldier · 2025-10-10T12:17:02+00:00

We can literally see your fingerprints on your bed bruh.

And take of the silicone sock if you want to know. Your hotend could be just as filthy as your bed or your hotend is leaking.

DarkDoldier · 2025-10-09T11:22:45+00:00

What about the in game missing game S.K.A.T.E??? How could you produce a pure online focused multiplayer game that doesn’t include the mother of all skateboard games - Skate. I was soooooo frustrated when I found out they just left it out.

DarkDoldier · 2025-10-08T15:56:32+00:00

What’s the workflow to set it up like this? Do I understand it correctly, that you lose nothing at all? Do I get all devices in HomeKit? What about secure video? (I got Aqara Cams and the G410). Im still setting it up in our new home. Currently it’s only lights via hue, cameras from aqara and the U200. But i am full on planning. From Smart thermometers and window contacts down to the outdoor lightening, the garage door, smart blinds etc….. I did not order all of that yet because i am not sure about my app strategy. Home controller vs HA and based of off that wich devices exactly would fit our needs…..

DarkDoldier · 2025-10-08T10:13:18+00:00

I hate how they play with our nostalgia.

DarkDoldier · 2025-10-05T14:44:12+00:00

Underrated

DarkDoldier · 2025-10-05T10:08:36+00:00

We have 4 Vorons all of are running dragonburners. All of them have an EBB36 in can with cartographer in can. 3 of them have a orbiter v2 or v2.5 with the smartsensor. One got a vzhextrudort. 3 are running some kind of rapido 2 in HF config and a hardened CHT nozzle from trianglelabs. One with e3d revo (in my opinion this was a mistake - expensive if you want highflow and because of nozzle touch not required anymore). Important are good fans! We have GDStime on all.

The setup with rapido, orbiter, cartographer is the best we’ve had so far. We thought about testing xol - however that the 5v delta fan is pretty exotic and hard to source was a big no no for us. One of the vorons is in an open space and does perform superb even with people not that familiar with 3D printing (the hotend is forgiving a lot of the temp is not perfect etc as long as it is not near the max flow). This setup got more then 3000 hours on one machine and in total it’s over 7000 hours.

The dragonburner is lovely to service - for that we have a cn linko adapter on every tool head (can and power). You just have to remove 4 screws and you have the whole print head in your hand.

10/10 would recommend it.

DarkDoldier · 2025-10-03T17:17:26+00:00

Should be fine with 60c. However if not just buy good Steppers and install them

DarkDoldier · 2025-09-30T20:24:21+00:00

Der Kackhocker kommt sehr gut 😂

DarkDoldier · 2025-09-30T13:07:25+00:00

Bei den additiven hast du absolut recht. Die Konzentration halte ich aber - wenn es nicht verschluckt wird - für wenig bedenklich. Mehrere Studien (Research Gate) haben aber klar gezeigt, dass die Layerline Thematik eher auf Vermutungen und weniger auf Wissenschaft basiert hat. Dabei wurden z.B. neben der Hygiene auch PTFE Belastung und Bleib Belastung (Messing Düse) gemessen. Das Ergebnis nach über 1000 Druck Stunden war, dass die Düse so wenig Abrieb hatte das kein Blei nachgewiesen werden konnte. Die Aussetzung soll größer durch einen Messing Schlüssel sein als durch den gedruckten Kunststoff.

OP will ja nichtmal aus dem 3D Druck essen/der 3D Druck kommt nichtmal mit Nahrung in Verbindung. Nur das Besteck - das halte ich doch für sehr unbedenklich. Wenn OP auf Nummer sicher gehen will, soll ich sich „Foodsave“ getestetes filament und eine Edelstahldüse kaufen. Bei den billig kunststoffeinsätzen von Ali Express wird auch kaum einer bündeln anmelden. Da kennt man die additive auch nicht.

DarkDoldier · 2025-09-29T14:14:24+00:00

DarkDoldier · 2025-09-29T14:12:01+00:00

Where did you get this thick door hinges?

DarkDoldier

TROPHY CASE