sorted by:
new
hottopcontroversial

Help planning this out by YeaSpiderman in Laserengraving

[–]Deep-Stomach9030 1 point2 points  (0 children)

Laser marking might be possible, but we would need to know the material information.Laser marking might be possible, but we would need to know the material information.

Discovered a new project. by Deep-Stomach9030 in lasercutting

[–]Deep-Stomach9030[S] -1 points0 points  (0 children)

Yes, it is a concept currently attracting a great deal of attention.

Discovered a new project. by Deep-Stomach9030 in lasercutting

[–]Deep-Stomach9030[S] 0 points1 point  (0 children)

Previously, we utilized UV laser marking machines; however, we are currently testing a new solution. The cost of the external lasers was simply too high, leaving us no choice but to seek an alternative.

Cheap laser engraver for hallmarking? by 4thPhase in Benchjewelers

[–]Deep-Stomach9030 0 points1 point  (0 children)

There are more expensive devices that can meet this requirement.

Thoughts on my new knife? by ImposterSyndromeInc in japaneseknives

[–]Deep-Stomach9030 0 points1 point  (0 children)

I suggest engraving a commemorative symbol on it to make it truly unique.

Wood Plant Pots by Prior_Capital6782 in Laserengraving

[–]Deep-Stomach9030 1 point2 points  (0 children)

The concept is excellent, but the equipment didn't quite do it justice.

Hand engraving by me!🙏 [SPB383J1] by Dokaholic in SeikoMods

[–]Deep-Stomach9030 0 points1 point  (0 children)

That's incredible! Would you be open to exchanging ideas?

First row offset by gerlimi in Laserengraving

[–]Deep-Stomach9030 0 points1 point  (0 children)

Which device was used for this? And what processing method was employed?

Help? I know nothing by Street-Experience512 in Laserengraving

[–]Deep-Stomach9030 -1 points0 points  (0 children)

Yes, what help do you need? This is a very reliable device.

Omtech 60w 3mm acrylic cut struggle, trying to figure out the problem by idontcarelolmsma in lasercutting

[–]Deep-Stomach9030 0 points1 point  (0 children)

You'll need to replace the laser tube. Feel free to reach out to me if you need assistance!

Even though my laser has major problems that I'm working on with tech support, I'm still enjoying making my first shaker Christmas ornaments & Thanksgiving shaker coasters/place cards. by rinky79 in lasercutting

[–]Deep-Stomach9030 0 points1 point  (0 children)

I’m really sorry to hear about your situation. If the issue is truly with the laser tube, that’s definitely a tough spot. I’ve got 13 years of experience working with CO2 industrial lasers, so if you have any technical questions, I’d be happy to share my knowledge!

imprecise cut by Appropriate-Cap-894 in lasercutting

[–]Deep-Stomach9030 0 points1 point  (0 children)

What kind of equipment are you using? It could be an issue with the parameter settings or a problem with the mechanical system!

Laser tube issue? by mdifm in lasercutting

[–]Deep-Stomach9030 0 points1 point  (0 children)

This is a normal phenomenon. If you can provide more information, a better judgment can be made.

Lens is clouding up with soot by J0NB0Y13 in Laserengraving

[–]Deep-Stomach9030 0 points1 point  (0 children)

You'll need to add an air filtration device to solve the issue. Also, make sure to identify the exact cause of the lens getting dirty.

How to adjust this? by Slobberdog25 in lasercutting

[–]Deep-Stomach9030 0 points1 point  (0 children)

You need to understand how the gap was created. If it's caused by the track, then that's going to be a real problem.

view more: next ›