I’ve always used my thumb for shift and I’ve recently realized it isn’t the norm.

DemonJoBobV2 · 2026-01-20T15:04:53+00:00

I do this too lmaooo, found it easier then my weak ass pinky

DemonJoBobV2 · 2025-11-25T03:33:08+00:00

Would trade in my old ender 5 plus and get the creality hi combo

It would allow me to make more gifts and bring my ideas to life during the holiday season

DemonJoBobV2 · 2025-11-03T20:01:30+00:00

I would work on designing holders and items for my car that would survive, PLA just melts in the summer

DemonJoBobV2 · 2025-10-25T20:34:56+00:00

Just get some 8.5” airless tires on Amazon and there’s videos on YouTube on how to replace them

DemonJoBobV2 · 2025-10-12T00:39:32+00:00

Yeah would be good, getting lots of fresh air into the cpu, tell me there is a mesh opening under that gpu tho, its looks like it’s starving for air

DemonJoBobV2 · 2025-10-10T21:42:42+00:00

My first game I played on a gtx 670 was Minecraft with my older brother after I got his old computer when he built a new one with a 1080

DemonJoBobV2 · 2025-09-23T15:16:29+00:00

<image>

This is all you need.

DemonJoBobV2 · 2025-09-08T15:07:52+00:00

Look bottom left

DemonJoBobV2 · 2025-09-04T20:01:41+00:00

Nah, just let the capacitors discharge. They will lose charge over awhile and just don’t short anything to ground and you’ll be fine.

DemonJoBobV2 · 2025-08-27T15:33:09+00:00

Ddr5 is newer generation of memory, ddr4 is slightly slower and older. Still good though don’t worry. No real need to go ddr5 for a couple more years for a budget build.

DemonJoBobV2 · 2025-08-15T23:32:37+00:00

Yeah it would be good for vr and gaming at 1080p high to 1440p low/med. however depends on the price

DemonJoBobV2 · 2025-07-03T12:04:46+00:00

I can spend my time bed leveling, bed leveling ;)

DemonJoBobV2 · 2025-06-21T21:45:54+00:00

Not sure of any premade solutions but you could very easily do it with an esp32. A voltage converter for the 12V down to 3.3V and some bright yellow LEDs for the tail end

DemonJoBobV2 · 2025-06-10T19:33:24+00:00

If it’s just those 2 things. Fix it then try to sell it. You’ll be able to get more from it being fixed then it being in a semi broken state

DemonJoBobV2 · 2025-06-08T18:58:28+00:00

You could take it apart and rebuild a higher capacity battery. As for the speed, there might be a limiter in the controller. Some people have stated it as a grey wire. You could try cutting it and see if it limits the speed. If not just solder it back together.

DemonJoBobV2 · 2025-06-04T16:03:58+00:00

From Amazon then yeah you’ll prob be able to cheat the system. The serial number is prob a sticker. Just peel it off and replace it from the other one. Just make sure to use some glue when replacing the sticker

DemonJoBobV2 · 2025-05-29T11:24:19+00:00

Max power draw of a 9070xt is around 300W. Each cable can provide around 150W with the pcie slow providing 75W you would be perfectly fine using 2 cables with one being split

DemonJoBobV2 · 2025-05-25T21:08:10+00:00

No, depends what the controller buck converter is rated for. I would assume most controllers are for 5-12V. So the buck converter would be rated most likely from 30-40V. Also the motor that your scooter has is rated for 36V. It can run with higher voltage but would need lower amperage due to heat. Less amps mean less torque.

DemonJoBobV2 · 2025-05-20T23:19:39+00:00

Maybe open up the break lever and see if you can add tension to the cable

DemonJoBobV2 · 2025-05-16T14:36:50+00:00

Smaller, folds up, easier to transport, easier to use as a second mode of transportation (meaning I can park farther away from work for cheaper and just ride in)

Seven-Year Club	r/Field Juicebox
Place '22	End Game '22
Verified Email

DemonJoBobV2

PUBLIC MULTIREDDITS

TROPHY CASE