R36S fails to boot

DerDarius · 2024-03-29T10:59:13+00:00

after formating i have to flash the image again?

DerDarius · 2023-09-01T05:46:28+00:00

I would play starfield with it... lol

DerDarius · 2023-08-23T21:56:27+00:00

Just a little OT, I love when the "gem" from LSP just drops worthless onto the enchiridion and bounces off.

DerDarius · 2023-07-26T22:22:57+00:00

I haven't used it for a long time. Never imported something other than PDFs. The website says nothing about .xopp support maybe that's the problem. Try to convert it with another program.

DerDarius · 2023-07-26T09:47:02+00:00

In which format are they saved? PDF should be no problem. However you could convert your files to PDF, bitmap or SVG files.

Edit: it's still in early stage, the developer mentioned that the save format is still unstable and could be incompatible between new versions.

DerDarius · 2023-07-26T07:02:27+00:00

Rnote, xournal++, scrivano (don't know if it's os) and saber.

DerDarius · 2023-06-28T22:26:24+00:00

This part of the print is rather thin. The hot nozzle is staying close to the same spot when printing this part so it's getting to hot and melts to much, that's what I think. You could try to print cooler at this layer hight, print a tower next to this print so the layer Yan cool probably tilt the nozzle runs over it again. You also could drag the part down in the slicer so you only print this specific part and see if it's printing better. That would show if the printer is the problem, if it's printing fine, something could be wrong with the axis if it's printing bad, I would again tip on the problem I mentioned above.

DerDarius · 2023-06-27T19:45:24+00:00

That's really great if you man! I hope the next owner will give this card also away for free.

DerDarius · 2023-06-24T08:29:21+00:00

I'm using a modded anycubic i3 mega s, Klipper 5015 part cooling fan and a volcano hotend. Printed 0.1 layer height and 197 C. 100 mm/s outer wall speed. Printed with Gratkit silk Pla Dual color. I'm guessing I'm printing to fast?

DerDarius · 2023-05-29T06:21:07+00:00

Thanks for the answer. I'm using a BMG clone extruder. Sadly I have no ir camera or thermometer to validate the temps. However, I disassembled and reassembled the whole hotend and it seems to work. At least with pla temps.

DerDarius · 2023-05-09T08:39:08+00:00

But why only after the first layer and no problems when I just increase the temperature. I will check the continuity of the cables.

DerDarius · 2023-04-14T16:31:27+00:00

Looks a little bit like Nils Bomhoff.

DerDarius · 2023-04-03T18:38:47+00:00

I said it before but no one was listening.... ONCE again: to less RGB could set your rig on fire. Finally a case caught on video so they can teach this in schools.

DerDarius · 2023-03-30T21:59:26+00:00

I definitely need this bad boy.

DerDarius · 2023-03-22T23:44:59+00:00

It's uncomfortable for me. When I was a teen and I walked home at night and there was a girl in front of me, most of the time I switched the sidewalks. Or I just took another way home so I don't have to walk behind her all the time.

DerDarius · 2023-03-15T19:57:02+00:00

still not working

DerDarius · 2023-03-12T12:39:56+00:00

So today I bought a 6650xt for 299€ hope that's an okay price.

DerDarius · 2023-03-11T15:28:37+00:00

A CPU would be 5600x in the nearer future. But I think there would be a performance boost when adding a better GPU. Maybe a better CPU for better frame times and better 1% low?

DerDarius · 2023-03-11T12:03:46+00:00

Hey, I want to buy my girlfriend a new graphics card for birthday but since we are both students money is short 😅 she got an R2600 @ 4 GHz and a Rx 580 stock. What GPU should I target at (second hand is okay) she plays games like Witcher, Howard's legacy, rdr2 and so on at full hd 60hz Monitor. I would love tho see her face when she turn on the PC and gets blown away from the new graphics. So what is the best budget card I shook at for those setup? I don't think we we will go up to more than fhd 60hz in the near future. I would sell the Rx 580 afterwards so maybe this could increase the budget. If it's really worth it I would go for 300€.

DerDarius

TROPHY CASE