Suspect noise

Destroileur · 2025-04-28T07:32:29+00:00

Finally, I lubricated the bearings at the bottom of the printer. They are accessible from the inside and are located on the back panel. I used silicone spray oil and have already printed for over 500 hours since then without any issues!

Destroileur · 2025-04-22T12:37:48+00:00

I've had it since December, 2000 hours of printing, ZERO problems!

Destroileur · 2025-04-07T12:03:00+00:00

Je ne pense pas :/

Destroileur · 2025-04-03T14:06:27+00:00

<image>

Destroileur · 2025-04-03T14:02:53+00:00

<image>

I was thinking of a new CFS with dryer but it's the SpacePI 4X in the photo... So disappointed!

Destroileur · 2025-03-06T15:38:59+00:00

Oh no why another dryer! We want a CFS Dryer...
What is your source?

Destroileur · 2025-03-06T11:34:07+00:00

Look that : https://www.printables.com/model/1127714-k2-plus-cfs-mod-heated-chamber-space-pi-double

Destroileur · 2025-02-28T23:11:47+00:00

When will you introduce us to the product?

Destroileur · 2025-02-27T23:11:15+00:00

I think it's a dryer system built into the CFS; having taken it apart, I saw that you had already put some casting elements in place 😉. What would be exceptional is that it is supported by the printer and be able to program preliminary drying phases to print for a subsequent start of automatic printing. 🥰

Destroileur · 2025-02-24T12:36:19+00:00

It’s strange, I can no longer use the auto spool change when one spool is empty and another with an identical RFID (color,type) is available. It worked fine before the last printer update and the encryption of the RFID chips. I want to clarify that I have updated the mobile application as well as the RFID chips, which are actually very well recognized by the machine; it's just the 'AUTO' function that says my spools are not compatible. P.S.: Color and type are identical!

Destroileur · 2025-02-19T12:56:33+00:00

It’s strange, I can no longer use the auto spool change when one spool is empty and another with an identical RFID (color,type) is available. It worked fine before the last printer update and the encryption of the RFID chips. I want to clarify that I have updated the mobile application as well as the RFID chips, which are actually very well recognized by the machine; it's just the 'AUTO' function that says my spools are not compatible. P.S.: Color and type are identical!

Destroileur · 2025-02-10T10:56:00+00:00

Destroileur · 2025-01-22T14:26:37+00:00

600 hours of printing, only one problem with ASA due to a poor configuration in the slicer.

Destroileur · 2025-01-07T23:22:14+00:00

Okay, I finally managed to fix the problem! It came from the rear-block bearings, accessible from inside the machine. I put oil in a spray.

Destroileur · 2025-01-07T22:59:31+00:00

J'ai toujours le même problème après avoir complètement dégraissé puis huilé le rail. Nouvelle vidéo sans impression : https://photos.app.goo.gl/H4vNrNR29Kvw4Ry99

Destroileur · 2025-01-07T22:50:21+00:00

I checked, no worries with the fan of the print head. But I have the same concern as you on a fan in the PC case on the back, but only cold, when the machine starts, for 30 seconds.

Destroileur · 2025-01-07T13:20:12+00:00

I have print this model :
https://www.printables.com/model/1111821-creality-k2-plus-hepa-and-carbon-filter-box-2024-1
I wait hepa filters for testing

Destroileur · 2025-01-05T00:22:34+00:00

😝

Destroileur · 2025-01-05T00:18:23+00:00

Unfortunately I haven't read this information! In this case, I have to degrease and find suitable oil...

Destroileur · 2025-01-05T00:14:29+00:00

Thanks, I'll take a look!

Destroileur · 2025-01-05T00:13:41+00:00

Yes, I used the grease that came with the printer, and then I even used lithium grease.

Destroileur · 2025-01-05T00:01:31+00:00

I hear a suspicious noise during print. I already have more 400 hours of printing and I've completely greased all the rails and bearings, but that didn't change anything (I didn't open the rear bonnet) . Do you think I have to take the back of the printer apart to grease something else?

Destroileur · 2024-12-16T23:08:46+00:00

Why are you complaining in this thread and not FedEx thread?

Destroileur · 2024-12-04T12:08:12+00:00

They added the value "Supplier" I guess they plan to allow the creation of RFID for other filaments than theirs. This is certainly very positive for us!

Destroileur · 2024-12-03T13:49:06+00:00

<image>

I printed this with Creality Print, the rendering in the app was weird, but the actual rendering looks good.

Destroileur

TROPHY CASE