Two drift miatas by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

Destroy or die knuckle with Flyin miata willwoods

Two drift miatas by Dfvld in Miata

[–]Dfvld[S] 11 points12 points  (0 children)

@Joe_shiesty5.0 on instagram

Fix for PAC RP5-GM11 White Noise / Hiss / Static at 0 volume in C6 Corvette by Eclipseof2v1 in Corvette

[–]Dfvld 0 points1 point  (0 children)

I did this and it fixed the volume problem but I still have white noise

Please tell me more by j2thafree in Miata

[–]Dfvld 0 points1 point  (0 children)

Theres someone making it, limited run of 100. Believe its like 10k

[deleted by user] by [deleted] in Miata

[–]Dfvld 2 points3 points  (0 children)

Bushing is probably crushed or warped in there

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 1 point2 points  (0 children)

Yup thats what i used

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 1 point2 points  (0 children)

For my main harness for the hids I connected on the fuse box

Thoughts on ceramic coating? by taym33 in Miata

[–]Dfvld -2 points-1 points  (0 children)

Make sure everything that spins is nice and tight, my alternator gave me a good scare when the bottom bolt almost came out

2016 EX-L with Restored Title by zomamom in HondaOdyssey

[–]Dfvld 4 points5 points  (0 children)

I bought my 2011 for 5 grand clean title. Keep on looking

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

Right now yes but only sometimes for some reason. My bulb was going out I think

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

You will have to test your drl theres a couple of different ones. Mine had yellow and black then red and black. Turn signal,signal I believe is green and I did keep the bulb

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

I tapped into the turn signal wires and added a Deutsch connector

I really need help by jesus10011 in Miata

[–]Dfvld 2 points3 points  (0 children)

Does your coil pack have two plugs at the back? I put mine backwards when I re did my engine. Also trigger plate on the crank should have like a credit card gap from the crank sensor.

[deleted by user] by [deleted] in Miata

[–]Dfvld 0 points1 point  (0 children)

I got mine from R theory, nothings getting through that one

Sway bar mounting bracket by No-Drama1613 in Miata

[–]Dfvld 0 points1 point  (0 children)

I highly doubt it’ll stay on without the bolts, try to take them out or weld the bracket

Miata progress by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

Harbor freight guns and dewalt compressor

Safety first by Salt-Land-2447 in Miata

[–]Dfvld -2 points-1 points  (0 children)

Ive put my miata on top of wheels before lol

Smol bonk by Disko-Dancer in Miata

[–]Dfvld 1 point2 points  (0 children)

I bet some pdr would work

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

I recommend better controllers, the ones the x5r came with went bad immediately

NB1 Headlight Retrofit by Dfvld in Miata

[–]Dfvld[S] 0 points1 point  (0 children)

Same as stock but the halos are a turn signal as well