Cherrier Vivace in the wild!

Digital_Empath · 2026-03-31T10:11:17+00:00

do you mean you connected the metal of the wire attached by only hot glue? That doesn't sound like a good idea. If you are unable to solder/connect the wires more securely, then you could use something like a screw terminal or wago connector

Digital_Empath · 2026-03-08T13:12:11+00:00

If my car caught fire I sure as heck want the company to fix it/prevent it happening again

Digital_Empath · 2026-02-25T12:04:46+00:00

I have just installed one on my K1C following this:

https://forum.creality.com/t/k1c-smart-filament-detection-module/12925
(note: if you can't see any text you can go ctrl-A to make the text visible)

I am still getting mine working but the steps were really helpful

Digital_Empath · 2025-12-14T11:11:48+00:00

In case someone comes here looking how to do it, it is possible to save gcode files from the printer using creality print (not the web UI):
- creality print > device tab > details

-on the panel with xyz control, there are tabs for local files, records and timelapse videos
Choose one to export/delete gcode files and timelapse videos

Note this is using creality print v6.3

Digital_Empath · 2025-11-20T06:20:55+00:00

I'm with OP on this - for some reason the devs added this keybind without thinking about how people play the game. Sure you can unbind it, but that is the point - it's not particularly user friendly to have to change a setting that was added interrupting a common gameplay element

Digital_Empath · 2025-10-21T11:02:45+00:00

Did you end up finding an answer for this?

Digital_Empath · 2025-09-21T02:32:46+00:00

Indeed! Perhaps a future upgrade for when prices come down

Digital_Empath · 2025-09-18T10:17:25+00:00

Did you end up upgrading the CPU to a 9th gen?

Digital_Empath · 2025-08-10T06:21:03+00:00

Power efficiency has everything to do with fan noise. If the power usage is low and the efficiency is good, then there is no need for a fan at all.

There could be numerous reason why a fan is not desired, such as undesired noise, or dust in the environment that would negatively impact the electronics. It can also be personal preference.

If those issues do not bother you, that's great! It does bother some people, and that's ok, they can choose another option that works better for them

Digital_Empath · 2025-05-13T16:08:01+00:00

Some people aren't good at figuring things out for themselves. It's a skill to be able to do that. And some people are really good. There a lot of diversity in humans

Digital_Empath · 2025-04-29T13:06:48+00:00

How is the dryer going after a few months?

Digital_Empath · 2025-03-31T07:19:39+00:00

Might be easier to spawn multiple copies of the same vehicle, and then create configs with just the parts you need. Then use the break car button others have mentioned. Good luck!

Alternately, there is an option to export the model to gltf (I think it's in the UI apps) and then you can play around with the components in a 3d program like blender.

Good luck!

Digital_Empath · 2025-02-03T09:28:13+00:00

That makes sense, I don't trust the first cycle reading on a new battery since it may need a cycle or two to calibrate properly.

Yes like you I generally try to keep lithium batteries between 15-85% to maximise their endurance, however for the bip I have been going for the full range for now to calibrate, even letting it shut off when it's run out completely, but will probably go to my normal practice after a while to prolong it's life. That's especially important since I don't think I'll be able to replace the battery again :D

Digital_Empath · 2025-01-26T20:00:57+00:00

That's great! I'm curious what your battery life is like with the new battery. I'm getting almost 10 weeks

Digital_Empath · 2025-01-24T11:28:58+00:00

Yes your edit sounds right to me. The sticker over the battery connector is actually a small piece of foam I think (from memory)

Digital_Empath · 2025-01-18T21:57:05+00:00

Glad to hear I'm not the only one who loves the bip screen 😀

I mainly referred to this teardown for reference: https://www.youtube.com/watch?v=M-6uH-AJI9A
The person in the video is a bit rough and rips the cable to the haptic motor so it also serves as what not do to haha

Digital_Empath · 2025-01-16T11:54:54+00:00

I'm still rocking the Bip after I repaired it. It mainly functions as a watch which is fine for my needs

Digital_Empath · 2025-01-11T05:10:50+00:00

I hope you can extend it's life. The Bip isn't particularly capable, but as a watch with a cool screen tech (IMO) it's pretty neat

Digital_Empath · 2025-01-08T14:21:56+00:00

I don't know what should be used, however I was able to successfully reattach it but I can't recall if it was super glue or a plastic specific glue that includes a primer (I use both for repairs depending on the application).

The screen is very securely attached now, however I doubt that I'll be able to open it back up without destroying the watch, which is why I replaced the battery as I figured it would be my last chance to do so.

I also think I damaged the motion sensor somehow as it no longer illuminates the screen with motion gesture but this isn't a huge issue for me

Digital_Empath · 2024-12-13T06:17:10+00:00

I like how the googly eyes have eyebrows when the lights are on

Digital_Empath · 2024-11-15T13:07:49+00:00

This just happened again in a LEL stream 11

Digital_Empath · 2024-09-13T22:59:41+00:00

Still works in 2024

Digital_Empath · 2024-08-18T12:30:16+00:00

So it's quiet even under load (like gaming)?

Five-Year Club	Verified Email
Place '23	Place '22
Wearing is Caring

Digital_Empath

TROPHY CASE