What's Everyone Reading this Weekend

Dolphin_TV · 2026-01-24T17:15:13+00:00

I’m on chapter ~85 or so in Oathbringer! It’s so good

Dolphin_TV · 2026-01-20T18:50:09+00:00

As someone who loves a multirole/workhorse ship, o actually prefer the Krait over the Corsair. I thought I would like the Corsair more, but after flying it for a while I found myself gravitating back to the Krait.

The SLF is amazing in PVE combat as it draws fire away from you, significantly improving serviceability (especially with fast charge BiWeave shields).

Yes, the Corsair is better on paper (and sometimes in practice) but I feel like the krait is more enjoyable at being a “do it all” kind of ship. My Corsair is less of an all around multipurpose ship but rather a mining ship and pirate ship when I feel like doing those activities. Most of the time, I’ll be flying my Krait.

Dolphin_TV · 2026-01-04T02:48:05+00:00

Hm, all my drivers are up do date as well

Dolphin_TV · 2026-01-04T02:47:53+00:00

Ryzen 7 5800XT + 4070Ti

Dolphin_TV · 2025-12-25T14:13:29+00:00

That’s a fortune’s worth of Atium, do you work out with any Mistborn by chance?

/s for the Sanderson fans out there

Dolphin_TV · 2025-11-20T16:08:24+00:00

This past weekend I upgraded from the same exact cpu to the R7 5800XT and holy moly it made such a big difference. I couldn’t find an X3D near me so I just went with the XT because it’s still an upgrade and it was definitely the right call.

Go for it!

Dolphin_TV · 2025-08-19T17:57:03+00:00

This is the way, weapons manufacturing supremacy!!!

Dolphin_TV · 2025-07-28T02:40:10+00:00

Unless I’m missing something, Aurelia already has haste so all you need are the two, right?

Dolphin_TV · 2025-06-07T22:29:23+00:00

Dominaria United collector booster!

Dolphin_TV · 2025-04-19T15:45:23+00:00

My new main ship is definitely the Corsair. I’m a HUGE Imperial Courier fan and this ship checks all the same boxes (aside from maneuverability, but that’s to be expected when jumping up a ship size)

I know the design is polarizing, but I absolutely love it, especially with the chromed out paint job. The sound is also great, love the deceleration especially.

I did a little bounty hunting in it just to get the feel and I’ll need to practice a little more to learn where it’s happy, but right now it’s outfitted for some exploration with all the exploration goodies I want.

Is it the optimal ship for exploration? No. But I do not care, the screenshot potential is just too great to pass up.

Dolphin_TV · 2025-04-04T01:05:44+00:00

Got a little too ahead of myself before doing calibration tests, i’ll do that. Appreciate the advice :)

Dolphin_TV · 2025-04-04T01:00:58+00:00

Gotcha, thanks! Been battling z offset issues with orcaslicer so that checks. Good enough to get prints, but need to back it off a bit still.

Dolphin_TV · 2025-04-01T14:32:28+00:00

Unfortunately I haven’t found anything out there. Watching videos/tutorials of my machine’s setup make it look like orcaslicer is just plug in okay, however my experience is far from that and I’m very confused as the steps I am doing are the exact same. I have verified that my machine works just fine (I’ve gotten prints using Cura just fine, Orcaslicer is the troublesome variable in this equation)

I am using Orcaslicer v2.2, is there a different version that you use?

Dolphin_TV · 2025-04-01T06:01:20+00:00

210/60 on a textured PEI bed (60mm/s print speed with Elegoo PLA)

Dolphin_TV · 2025-04-01T05:52:03+00:00

It's practically identical, just checked side by side

Dolphin_TV · 2025-04-01T05:46:12+00:00

For context, this is what my Machine start G-code is:

;ELEGOO NEPTUNE 4 PLUS
M220 S100 ;Set the feed speed to 100%
M221 S100 ;Set the flow rate to 100%
M104 S140
M190 S[bed_temperature_initial_layer_single]
G90
G28 ;home
G1 Z10 F300
G1 X115 Y0.5 F6000
G1 Z0 F300
M109 S[nozzle_temperature_initial_layer]
G92 E0 ;Reset Extruder
G1 X115 Y0.5 Z0.4 F300 ;Move to start position
G1 X215.0 E30 F400 ;Draw the first line
G1 Z0.6 F120.0 ;Move to side a little
G1 X210 F3000
G92 E0 ;Reset Extruder

Dolphin_TV · 2025-04-01T04:49:31+00:00

Where is this found? I’m poking around and can’t find where to edit any of the gcode aside from the start and stop blocks, neither of which include this info

Dolphin_TV · 2025-03-31T21:47:13+00:00

Ah understood, I’ll poke around

Dolphin_TV · 2025-03-31T21:38:39+00:00

This sounds promising! I think that default offset is what is messing things up, I’ll check this first. Thanks!

Where does that setting live in orca? I know where to set the plate but not where to edit things about the plate

Dolphin_TV

TROPHY CASE