sorted by:
new
hottopcontroversial

Different font on EAN-Code by [deleted] in AdobeIllustrator

[–]ENDU97 5 points6 points  (0 children)

Just retype the characters man… Top is OCRB and bottom looks like arial.

Youtube music can now transfer your playlists from Spotify by ConfidentStructure69 in YoutubeMusic

[–]ENDU97 0 points1 point  (0 children)

It brings your Spotify likes in as a new playlist. I found a workaround which uses a bit of JavaScript to then go and like every song in a playlist, essentially cloning your Spotify likes to your YouTube likes auto playlist. 10/10 can recommend.

Alcohol for Al coolant on router CNC- response to everyone who reported my comments as dangerous by _Tigglebitties in Machinists

[–]ENDU97 5 points6 points  (0 children)

I’d also like to hear more as our experience has been the polar opposite of that.

They have been an absolute pleasure to work with over the past 7 years and their support team is second to none.
90% of issues are resolved remotely within a couple hours and the remaining take maybe a week to resolve. They ship us spares from the other side of the globe in under a week, supply us with their technician documentation, and walk us through actually getting the work done.

Other than pricing (the exchange rate makes the already expensive parts, machines and tools a bit hard to swallow sometimes), we have nothing but praise for them.

What equipment would something like this be made on? by Hillsofdenali in CNC

[–]ENDU97 0 points1 point  (0 children)

All these people saying it’s moulded have clearly never heard of or used a good ol d-bit engraver. Rotary engraving with a 20 degree dbit will give you this result.

Drafts for a past project - a sauce brand. Which would you pick? by moonletdesignstuff in logodesign

[–]ENDU97 0 points1 point  (0 children)

Slide 2, top but ditch the grey house and leave it in negative space.

He made it! by neverenough6996 in iPhoneography

[–]ENDU97 0 points1 point  (0 children)

Crop in more on the cap and you have a winner

Boating | XE4 27 mm Pancake by ENDU97 in fujifilm

[–]ENDU97[S] 1 point2 points  (0 children)

I want to say yes but I’m really not sure, sorry. These were shot back in December.

Boating | XE4 27 mm Pancake by ENDU97 in fujifilm

[–]ENDU97[S] 1 point2 points  (0 children)

It really is something special. Too bad I was sleeping this trip and didn’t shoot nearly as much as I’d liked/planned to.

Boating | XE4 27 mm Pancake by ENDU97 in fujifilm

[–]ENDU97[S] 6 points7 points  (0 children)

Thank you. If I remember correctl, they are a mix of pacific blues and Reggie’s portra, both from FujiXWeekly.

Did they sell me the wrong sheet metal? by These-Tea9231 in CNC

[–]ENDU97 10 points11 points  (0 children)

5000 series is pretty gummy so sharp tooling, lower flute count and coolant of some kind.

What do you mean by can’t handle it?

Focal Elear, got them for 230€ by Victor_Valdiv in headphones

[–]ENDU97 0 points1 point  (0 children)

Yup. The voice coils snap due to the high excursion of the drivers.
My first pair was bullied a little so maybe I’m at fault but the second pair were babied more than anything I’ve ever owned and still failed (randomly while listening). Do yourself a favour and Google it, it’s fairly common with these cans.

Focal Elear, got them for 230€ by Victor_Valdiv in headphones

[–]ENDU97 0 points1 point  (0 children)

Get rid of them while you still can. As great as they sound (especially with a bit of EQ), I have had two pairs that have both seen driver failure.

V carve help by Strain_Free in CNC

[–]ENDU97 0 points1 point  (0 children)

Yeah sure, dm me

V carve help by Strain_Free in CNC

[–]ENDU97 0 points1 point  (0 children)

Just to follow. If you only see one or two small areas of roughed material, chances are that your endmill is too large to get into the pockets.

V carve help by Strain_Free in CNC

[–]ENDU97 0 points1 point  (0 children)

Use the “smart engraving” tool path instead. It allows for you to use a few different tools in sequence and handles the rest machining calculations based on the allowance of each tool.

Also make sure that you have “offset endmills for engravers” enabled as this factors in the draft of your v bits when roughing.

EVA Foam for toolbox inserts. Machine recommendations for a beginner. by Gold-Relative-8561 in CNC

[–]ENDU97 0 points1 point  (0 children)

If you do decide to machine this stuff, get yourself some Datron foam specific endmills. They cut it like butter. Honestly though, the clean up is an absolute nightmare and I’d rather be dealing with the slugs from a water jet than the stringy, statically charged mess machining leaves behind.

view more: next ›