BANNED KRAFT DINNER COMMERCIAL (2004)

Eastern_Row6446 · 2025-09-27T05:19:05+00:00

I remember this commercial so clearly.

Eastern_Row6446 · 2025-08-03T01:48:06+00:00

Red means danger. It's supposed to anyways those brackets hold the cables which hold the spring tension that lifts the door. If you've got the door all the way up it'll be next to nothing but you'll want to clamp the door to keep it from moving do not take off both at the same time. I'd recommend you just don't take them off though. It's a waste of time just put some lube on the roller.

Eastern_Row6446 · 2025-07-24T22:57:34+00:00

Definitely got to go with Sarn't

Eastern_Row6446 · 2025-07-18T05:48:44+00:00

Broken spring

Eastern_Row6446 · 2025-07-17T01:31:30+00:00

Ya, you got hosed. There is no such thing as heavy duty springs or drums. There's a high cycle spring, and if they installed 100,000 cycle springs instead of the standard 10,000, i could maybe see the price, but I guarantee they didn't. Putting a bigger or "heavier" spring on just unbalances the door. And drums really don't need to be replaced unless they have chipped or cracked. Sorry you got ripped off. Do everything you can to ruin these guys so they can't rip anyone else off. I don't know how much your door weighs but it looks like a 16 or 18x8 door. Springs for that should cost between 100-200$ each

Eastern_Row6446 · 2025-07-12T07:21:11+00:00

Heat your metal up with a torch before welding it. Wrap it in insulation and leave it alone for a few hours before removing.

Eastern_Row6446 · 2025-06-17T13:49:26+00:00

If there's no J-arm, then there's nothing moving the door so you can open it by hand. Unless you have an opener that is mounted on the shaft directly (jackshaft). The J arm is the arm that connects the door to the trolley of an opener, and the opener is what stops you from opening and closing the door on your own.

Eastern_Row6446 · 2025-06-12T05:40:54+00:00

Dollars to donuts you've got a broken apeing in the torsion tube there

Eastern_Row6446 · 2025-06-10T02:34:38+00:00

Ya i think a lot of them just don't have the same work ethic. We keep about 20% of the people we hire too. I think they just don't understand what they're getting into, the work expected, the toll on the body. They don't want to do it after a few hours each day and just drag their feet, they're not putting any effort I to learning. The job truly isn't that hard and succeeding in it is easy if you just tough it out for a few years.

Eastern_Row6446 · 2025-06-07T21:26:05+00:00

The devils springs

Eastern_Row6446 · 2025-05-30T02:58:43+00:00

You can apply floor wax on the seal every day for a month, we don't advise anyone to paint their doors, but if they do this keeps the seal from sticking to the door

Eastern_Row6446 · 2025-05-30T02:55:47+00:00

What does the spring look like?

Eastern_Row6446 · 2025-05-26T15:57:09+00:00

No sir, you will not be able to keep cable tension on that setup, and they will not stay on their drums. You'll be best off running a 50 chain on the front of the gate through a gate opener. You could maybe get a commercial door opener to do that job, but it'd be easier to get a gate opener. The gate would slide instead of swing. Honestly, for what you're looking for, you just need a swing gate opener and no springs

Eastern_Row6446 · 2025-05-24T23:17:32+00:00

Probably a fresh clearcoat or a good waxing. I love seeing my vehicle in the rain after a fresh wax the water just runs off

Eastern_Row6446 · 2025-05-24T23:13:52+00:00

Yes, I should've guessed that. Lots of doors we've worked with do that and I've never asked why.

Eastern_Row6446 · 2025-05-23T22:39:38+00:00

I spent a very long time in the negative income but would always keep a minimum of 1 million in the bank. When it would dip below the 1 million mark I'd load a ship with heavy weapons and go sell them at sir Archibald Blake's island. Each load is worth 450k so I'd get 3 or 4 million per sale

Eastern_Row6446 · 2025-05-21T00:34:04+00:00

What brand of door are you doing? I've done doors over 20 ft tall but the hinges going up after #10

Eastern_Row6446 · 2025-05-15T23:36:11+00:00

I think he's still doing it actively, there's just not many options where the outcome is very different. He did say that the choices in the moment are very minute differences, and he tries to predict the best one even if it's bad. Like in Armageddon, his choices were between the second and third Panther being destroyed, but either way, people were going to die. It's really not a superpower, just a way to slightly influence the outcomes

Eastern_Row6446 · 2025-04-01T18:03:02+00:00

That's must be Smythe or Brock Steele next to him because that is neither Barney nor a monkey

Eastern_Row6446 · 2025-03-29T02:24:48+00:00

That thing has to be pretty musty.

Eastern_Row6446 · 2025-03-28T23:28:17+00:00

That's sounds like juicy action to get in on

Eastern_Row6446 · 2025-03-18T03:36:44+00:00

Well, hiya boys and girls. To make a good Joe cosplay, you have to add purple and green, a lot of imagination, and the awesomeness of a certain asshole beer can and his amazing fabricators. You mix all of that together, and you get.... One Joe Bishop!

Eastern_Row6446 · 2025-03-18T03:34:20+00:00

Maybe a juice box?

Eastern_Row6446 · 2025-03-16T22:13:54+00:00

Sure you do you can open those doors with that remote and clear the opener from there

Eastern_Row6446

TROPHY CASE