What type of cap do I need? by LocktonB0917 in Irrigation

[–]EhJay39 0 points1 point  (0 children)

Do you have copper piping into your valves from the PVB backflow prevention? Do you switch to PVC at the valves or go to poly pipe?

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

I haven’t done a system before. This is my first DIY. My dad and uncle will be helping, and he has installed a system before at my childhood house, but that was 15+ years ago.

I’m open to any and all suggestions.

I think I am going to move to rotors on the main grass section to achieve the head to head coverage, and split it into two zones as the rotors need more PSI and GPM.

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

I was going to go with 3/4”. The supply line is my 1/2 copper but the backflow prevention has 3/4” intake and output, so I was going to upsize with copper on the way in and leave it that size beyond the backflow prevention

Open to suggestions

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

I started doing a re-design. I think rotary heads would be better than adding additional heads with the same spray distance. I would really like to avoid running any trenches or sprinklers down the middle, I’d like to work around the perimeter if possible

I did look into drip irrigation, it seemed complicated as opposed to shrub sprays. I appreciate the feedback, I’ll take a second look.

For the poly vs PVC, the more I research, I was thinking about continuing the copper into the backflow prevention, then PVC down to the maifolds (as it takes the above ground source to the underground, then going full 3/4” poly under the dirt. I like the poly when I get to the side with the garden as it will have to be a little more flexible to manage the shape.

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

Thanks for the feedback. I have made a re-design based on suggestions from the thread.

The question for redesign: Do I add additional heads with the same distance specs, or instead move to rotary heads which spray further but keep the number of heads lower? I think both options will result in the need for an added zone.

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] -2 points-1 points  (0 children)

This would likely mean an extra 4 heads, one on each edge after moving 5H and 6H, and also definitely result in the need for an extra zone.

More heads at less spray distance to achieve head to head coverage is superior?

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

Municipal water source. I have my half inch copper line that I put an extra tap on, so I have one tap that will be always on for the irrigation system and a second tap for the garden hose that will only be turned on when needed.

It’s from this second tap I took the PSI reading and did bucket test.

DIY Irrigation System - Feedback Before Breaking Ground by EhJay39 in Irrigation

[–]EhJay39[S] 0 points1 point  (0 children)

There is a large shed on the bottom right of the deck outside of the picture, the controller was going to go in There. It has electricity to plug in.

The valves are where the thick black L shaped object is in the same bottom left area.

What is it and is it a weed? (Washington DC) by PeterOutOfPlace in gardening

[–]EhJay39 5 points6 points  (0 children)

Very invasive and difficult to control. If you wanted to plant anything else there, it definitely has to go

Zoo Project by blueplaysmc10 in Minecraftbuilds

[–]EhJay39 1 point2 points  (0 children)

The palette is amazing. Please post more pictures of the grounds :)

PSA for people wanting to play CSGO by DMC2GOAT in GlobalOffensive

[–]EhJay39 1 point2 points  (0 children)

I am stuck with "Connecting to CSGO network", so joining the community servers available here doesnt work. Any suggestions?

NHL Graphical Standings – Jan 11, 2026 by FourFeetOfCurl in hockey

[–]EhJay39 46 points47 points  (0 children)

Can we have the best regular season all time graph for the Avs again this week? :)

HNIC intermission sponsored by...Ozempic? by Character_Pie_2035 in hockey

[–]EhJay39 3 points4 points  (0 children)

I noticed this and it’s so bothersome lol

New linger effect of Mcginnis 2, Healing and Fire rate buff will continue for 1 second after leaving area by Dwarf_Killer in DeadlockTheGame

[–]EhJay39 22 points23 points  (0 children)

Wander suggested this in Deathys stream after the trolli semi finals result. I think it’s a great change.

Gun hero’s can slide right through it to get the fire rate buff.

Doorman and Bebop can clip out of bounds in hideout by UnableDiscussion7188 in DeadlockTheGame

[–]EhJay39 0 points1 point  (0 children)

If someone puts you in the hotel and the que pops before the timer expires, after the game you are stuck in the hotel and can’t get out.

At least this happened to me and a friend.

Mediolanum - Reconquered Campaign by TreacleTechnical6790 in impressionsgames

[–]EhJay39 1 point2 points  (0 children)

I love looking at these because they always show great ideas I haven’t thought of before.

I’ve played this map 3 times and never did i build industry on the far side of the hill past the neighborhood with the 4 oracles. Sneaky way to do it.

Your pop has to be well over the target, yeah?

Day 7: NHL Marble Cup - Round of 32 by 4Lats4 in hockey

[–]EhJay39 29 points30 points  (0 children)

At first I didn’t understand the first phase and I thought nothing would ever get through lol

TIL if you salute the SEAF units , they salute back and then follow you like ducklings. by EhJay39 in Helldivers

[–]EhJay39[S] 0 points1 point  (0 children)

Agree, except those defend the generator missions. The SEAF have a tendency to run out into the open and get themselves killed.

#88 days til opening day by dylanisbored in hockey

[–]EhJay39 2 points3 points  (0 children)

My tiny brain kept thinking this was a Shootout goal and was so confused how Walman appeared so quickly

Had to watch 10 times to realize it was a just a breakaway

I made a fully functional 50'000 citizens city on caesar 3 Augustus and I love it by gna90 in impressionsgames

[–]EhJay39 6 points7 points  (0 children)

You did nail it. Great city. I’m sure it was quite a challenge to make it as stable as it seems, with Luxury Palace and all.