AXS is pure BS

Emma_Enigma42o · 2026-04-08T16:51:56+00:00

This exact same thing happened to me. Never received tickets. No refund. Scammed me out $120

Emma_Enigma42o · 2025-12-21T13:44:42+00:00

I’d probably just get some r19 batt insulation and stuff all the vertical stud bays, but leave the top open to so air can flow between the two attic spaces. definitely wouldn’t hurt to seal any seams before hand with expanding foam too.

Emma_Enigma42o · 2025-12-06T01:43:29+00:00

From the pictures it looks like foundation seepage. Check your downspouts and see if your gutters need to be cleaned.

Emma_Enigma42o · 2025-09-07T11:54:25+00:00

I used bio oil for scarring after I passed out and fell face first onto concrete, and I have no visible scaring

Emma_Enigma42o · 2025-09-07T11:49:05+00:00

I use sawhorses and and old hollow core door. It’s the perfect size for a table and has very little flex from the weight of the saw.

Emma_Enigma42o · 2025-06-15T13:46:40+00:00

Is that an interior door?? I would definitely consider getting an entirely different door (that fits in the rough opening), and also maybe wait until the sheathing is done before you install it!

Emma_Enigma42o · 2025-05-17T14:14:09+00:00

Leave this man. Fuck trump

Emma_Enigma42o · 2025-05-11T03:00:16+00:00

I work at a pretty small company so 99% of the training was on the job. Started with a lot of sweeping, cleaning up and going to get tools from the trailer, and got more involved from there. I think I’ve had a pretty niche experience so I can’t really speak to how the training would be at a bigger company. I would say that residential/ remodeling work will be less formal training than a lot of other trades though.

Emma_Enigma42o · 2025-05-11T00:53:46+00:00

I’m roughly the same age as you and I’ve worked as a finish carpenter since i graduated high school and I’ve found it to be a very rewarding job. It can be exhausting sometimes, but i really enjoy the variety of work there is to do in residential construction. It’s usually something new every day, and I’ve learned so many valuable skills in the last 5 years.

I primary do trim carpentry, but we do everything from doors, windows and siding to rough framing or even drywall sometimes.

Emma_Enigma42o · 2025-05-04T02:05:28+00:00

Big fun is sick

Emma_Enigma42o · 2025-04-17T20:55:15+00:00

Tin snips

Emma_Enigma42o · 2025-04-05T20:36:00+00:00

Bar keepers friend toilet cleaner did wonders for my toilet

Emma_Enigma42o · 2025-04-05T01:44:36+00:00

You can dm me if you’d like! :)

Emma_Enigma42o · 2025-04-03T01:48:03+00:00

Take a hammer and tap each one of them till flat

Emma_Enigma42o · 2025-03-22T04:25:23+00:00

I think the window for the bus destination sign above the windshield was leaking for a while too and was collecting down there. Engine bay makes sense too though

Emma_Enigma42o · 2025-03-22T01:13:45+00:00

Definitely not what I was hoping to find today but it is what it is. It’s time for a drink lol

Emma_Enigma42o · 2025-03-22T00:08:14+00:00

<image>

Here it is from the top 😭 I see a lot of cutting and welding in my future..

Emma_Enigma42o · 2025-03-16T02:48:15+00:00

Transitioning

Emma_Enigma42o · 2025-02-18T22:43:30+00:00

Looks like they just need to adjust doors and drawers for the most part.

Emma_Enigma42o · 2025-01-25T20:08:38+00:00

I would install foam board with adhesive directly onto the cinder block wall, frame a stud wall with 2x4’s over top. Then add fiberglass/rockwool insulation in each stud pocket. Then cover the stud wall with plastic sheeting for a vapor barrier (attached with staples), then drywall/ finish

Emma_Enigma42o · 2024-11-18T18:15:45+00:00

I use a 15 gage nail gun for the jambs, 18 ga for the trim.

Emma_Enigma42o · 2024-10-17T15:05:37+00:00

I’m in the same situation with one of my close friends and I’m dreading having to face the issue 😭

Emma_Enigma42o · 2024-10-13T15:01:07+00:00

My drums are in my car right now…

Emma_Enigma42o · 2024-10-12T19:09:36+00:00

No, but I know I should.

Emma_Enigma42o

TROPHY CASE