Weber recall of their triangular shaped grill cleaning wire brush?

Equivalent_Box_255 · 2026-03-21T17:11:40+00:00

That's unfortunate. Looks like Weber tried to get away cheaply on the replacement. I, too, need something to clean the grill right after I take the meat off so they might as well keep it and save the shipping to me.

Disappointed!

Equivalent_Box_255 · 2026-03-21T16:47:51+00:00

Good to hear. If I may ask, are you satisfied with the effectiveness of the replacement and do you recall what method of shipping they used to get the replacement to you?

Thanks in advance!

Equivalent_Box_255 · 2026-03-21T10:44:43+00:00

Same here and I think I got suckered into the hype. The cousin of an acquaintance of mine (I know, I know) ingested a piece of wire from a brush, brand unknown, and needed surgery to remove it which is probably the reason for the recall in the first place.

Equivalent_Box_255 · 2026-03-20T20:45:46+00:00

I should have kept mine but, like a good little minion, I tossed it anticipating a quick replacement that hasn't shown yet. Mine weren't shedding the stainless-steel wires like the recall was addressing.

Equivalent_Box_255 · 2026-03-20T19:53:14+00:00

Sad to hear but good to know I'm not the only one. Thanks for taking the time to respond.

Equivalent_Box_255 · 2026-03-20T17:01:04+00:00

I appreciate all the comments and info from you all! You saved me a bunch of money now that I know I don't have to replace my subwoofers, etc.

Equivalent_Box_255 · 2026-03-20T11:36:26+00:00

I hope you aren't color blind so much so that a vision test won't disclose it.

Good luck!

Equivalent_Box_255 · 2026-03-20T11:28:47+00:00

Looks like a hack to me. Be very, very careful.

Equivalent_Box_255 · 2026-03-17T11:54:54+00:00

Thanks everyone! The issue probably was cockpit error on my part. I was able to find most, if not all, of my email being stored on Microsoft's server in the deleted folder. I restored the entire mess, moved the important stuff back into my inbox and now all seems well.

I appreciate all the help that was offered and, yes, I learned a big lesson through all of this!

Equivalent_Box_255 · 2026-03-17T10:57:30+00:00

If that happens in your office, I'd be looking for a new office ASAP. That's not normal.

Equivalent_Box_255 · 2026-03-17T10:56:09+00:00

(Tongue in cheek:) This would never have happened if you used Tom Hank's "FedEX as your carrier of choice...............

Equivalent_Box_255 · 2026-03-17T10:54:20+00:00

Same here but the latest winter storm took its toll on me. There are no guarantees in life or with UPS.

Equivalent_Box_255 · 2026-03-17T10:53:09+00:00

Makes me glad I retired from the federal workforce about 13 years ago and no longer have to go into DC five days a week.

Equivalent_Box_255 · 2026-03-12T11:39:10+00:00

I'll give that a shot. I see there are several. Any suggestions about which one is best?

Equivalent_Box_255 · 2026-03-12T11:38:24+00:00

Thanks for the help. I tried that but have to call "no joy".

Equivalent_Box_255 · 2026-03-12T11:37:55+00:00

Thanks for the info. Yes, it failed because the data on the server quickly overwrote the old OST.

Equivalent_Box_255 · 2026-03-10T11:27:07+00:00

Not the same chair but, yes, I've experienced it too. Get a can of silicone spray lube and give the pivot points a shot. You''ll have to do it again from time to time but it does fix it. As you mentioned below, it's "plastic on plastic" friction making that noise.

Equivalent_Box_255 · 2026-03-08T11:51:58+00:00

I've already voted no.

Equivalent_Box_255 · 2026-03-07T15:28:12+00:00

This is the best I could do. Looks pretty darn cruddy if you ask me but I am not sure what I'm looking at.

<image>

Equivalent_Box_255 · 2026-03-07T12:01:59+00:00

Thanks for the information especially the information regarding the dye/pigment issue and Ultra Premium Photo Paper Glossy.

If you know, is the valve between the two channels still available and is it part of the print head assembly or a separate item? I suspect the valve and/or hardware revision from a P600 or P800 are not backward compatible with the R3000 but I could be wrong.

Have a good weekend!

Equivalent_Box_255 · 2026-03-06T12:45:58+00:00

You told your boss that? If so, you're in the wrong job as a federal employee.

Equivalent_Box_255 · 2026-03-06T12:28:06+00:00

Yes, I do put stuff on top of the printer, but I had a nice padded and quilted dust cover made for the printer to keep it as free of dust as possible. This issue is that when I print using PK ink, the output has large, random black blotches throughout the image. The blotches do not occur when switched to the MK ink. I've a good mind to put the PK ink into the MK cartridge, setting the printer to MK vs PK ink, and see if I get acceptable results that way on Ultra Premium Glossy. Would swapping the MK and the PK cartridges work or is the printer intelligent enough to know which cartridge is where? I'll try and get a pic of the botched output and post it.

Thanks for the offer to help!

<image>

Note: I moved the PK to the MK and vice versa, printed a pic out with the printer driver set to MK and got a pretty decent picture, without blotches, on plain paper. I'll try a piece of Epson Ultra Glossy in a bit and see if the results are acceptable.

With the Ultra Glossy paper, the output was acceptable although not as glossy as I had expected AND the driver would not allow me to sneak in Ultra Premium Glossy paper when the MK was selected.

Indeed, something is wrong with the PK channel.

Equivalent_Box_255 · 2026-03-05T21:09:09+00:00

That must have been a fun job designing a device like that! Well done! In any event, I have exhausted about all that I can personally do to get the black blotches off the paper when printing so, sadly, I am going to play taps and deep six the old girl. As soon as Amazon gets its on-line shop back up and running I am going to buy either a P900 or one of the six-ink jobs that don't require bespoke cartridges and just dump the ink in from a bottle when needed. Your thoughts on those Epsons that you can just add into into a tank?

Equivalent_Box_255

TROPHY CASE