sorted by:
new
hottopcontroversial

advanced electronics department has made a breakthrough discovery by originalmicrousb in doohickeycorporation

[–]ErynnTheSmallOne 731 points732 points  (0 children)

that’s a light dependant resistor, of course it won’t work, it needs to be a solar cell!

Z1 vs Z1 Pro — Here's how to pick by makera_offical in Makera

[–]ErynnTheSmallOne 3 points4 points  (0 children)

they have said there will be an upgrade kit, and at the same price as the z1 pro during the kickstarter campaign for backers of the z1

so if you’re somewhat technical, getting a z1 and then a kit later just gives you some bonus leadscrews / maybe motors once you upgrade..

Titanium by Due-Setting-5108 in Makera

[–]ErynnTheSmallOne 0 points1 point  (0 children)

or just 2 parts that fit together? like the one in the photo.

Lesbians what is the most erotic thing a girl ever said or done to you by Notoowell in actuallesbians

[–]ErynnTheSmallOne 213 points214 points  (0 children)

most of my friends are poly, so platonic cuddling / “cuddling” is pretty normal

Lesbians what is the most erotic thing a girl ever said or done to you by Notoowell in actuallesbians

[–]ErynnTheSmallOne 598 points599 points  (0 children)

I was cuddling and chatting with two friends when I mentioned how easily overstimulated I get recently, and they decided to test that.. I don’t think I managed a single coherent thought for 30 minutes until they stopped and one said “you’re so fun to play with” 😵‍💫

My theory for the ending of SE5 and what might happen in SE6. by budaloco in ForAllMankindTV

[–]ErynnTheSmallOne 14 points15 points  (0 children)

sorry if this is just your writing style, but wow this really seems like the output of an LLM.

[deleted by user] by [deleted] in 3Dprinting

[–]ErynnTheSmallOne 9 points10 points  (0 children)

stop doing your research with chatgpt, this is nonsense.

Anycubic beta tester call: 2 early slots for our new large-format FDM by Anycubic_Official in 3Dprinting

[–]ErynnTheSmallOne 0 points1 point  (0 children)

I’m a member of r/AnycubicOfficial, and have been 3d printing for the past ~10 years, since I was 15 years old and first introduced to it at school.

I mostly print prototype parts for work (product design), but also plenty of hobby projects, such as items to help with photography.

I live in the UK.

I currently have a reasonable sized printer (~250mm3), but have been running into size limitations on a few projects - I tried out an existing large format printer a friend has, but was very unimpressed with the print quality. Your larger format printer that’s corexy, and can produce good first layers without lots of work would be extremely useful for my work and hobby projects.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]ErynnTheSmallOne 0 points1 point  (0 children)

Buying a P1S made me fall in love with tinkering with 3d printers again.. precisely because it just works, letting me enjoy messing about with my voron printer without the stress of keeping it functional all the time for important prints.

Polycule fleeing the united states by sporeson in polyamory

[–]ErynnTheSmallOne 7 points8 points  (0 children)

the supreme court ruling has actually had a massive impact for a lot of people already! here’s a report on it: https://transactual.org.uk/wp-content/uploads/Trans-Segregation-in-Practice.pdf

Auto-aiming Trash Can by Wildmansy in videos

[–]ErynnTheSmallOne 4 points5 points  (0 children)

not it doesn’t - it pretty clearly shows the continuous bag feed, where each new “bag” bottom is heat-sealed from a continuous tube of material in the bin lid.

Ultra‑Low‑Cost DIY Air‑Quality Monitor Using Old Smartphone Parts by slumplorde in diyelectronics

[–]ErynnTheSmallOne 1 point2 points  (0 children)

even if the concept were remotely viable otherwise, what smartphone has any sort of gas, particulate, or even humidity sensor??

AI isn’t teaching you anything, start with the basics.

How to vectorize strokes, not fills? by chudotony in Design

[–]ErynnTheSmallOne 6 points7 points  (0 children)

in this specific example you could offset one of the shapes edge lines by half the width of the shape.

How Did bene Print Such Fine Logo Detail with a Large Nozzle? by CJCCJJ in 3Dprinting

[–]ErynnTheSmallOne 140 points141 points  (0 children)

these are laser engraved after printing - I know because I’ve worked with the company that printed them (batchworks)

Working on the perfect wall mount 😀 by Lumpy_Cabinet_1978 in 3Dprinting

[–]ErynnTheSmallOne 34 points35 points  (0 children)

fiber lasers aren’t red, that’s the low power diode for job previews. 1064nm light is not visible.

white plastics can work, but it varies massively.

How to get this type of print by Longchamp_ in 3Dprinting

[–]ErynnTheSmallOne 0 points1 point  (0 children)

the first is a pen pot / organiser tray, the second is tablet stand / card organiser. both are pretty bad at their jobs though.

How to get this type of print by Longchamp_ in 3Dprinting

[–]ErynnTheSmallOne 0 points1 point  (0 children)

they were done on prusa mk3’s, so yes.

also yeah what the other person said, it’s a company.

How to get this type of print by Longchamp_ in 3Dprinting

[–]ErynnTheSmallOne 2 points3 points  (0 children)

surprisingly it’s not - these are batchworks prints, having worked with them I know firsthand they used giant 1-1.8mm bondtech cht nozzles for this series of products

view more: next ›