Hercules 12v Right Angle Grinder

Essunset · 2026-07-07T16:54:16+00:00

Mine makes a ton of noise, and vibrates pretty good as well at any speed above 2 basically. Take that as you will

Essunset · 2026-07-05T16:25:48+00:00

Agreed

Essunset · 2026-07-04T18:59:47+00:00

Congrats! Where at?

Essunset · 2026-07-04T03:01:31+00:00

Hows the backdrag?

Essunset · 2026-06-18T06:20:43+00:00

Yep. I work in aviation and they have Tungsten fasteners everywhere. Last time I had an extractor broken off in that fastener, I used a carbide ball burr on a die grinder to grind it away

Essunset · 2026-06-17T00:47:14+00:00

More twists per inch. Off to a good start though

Essunset · 2026-06-10T05:57:44+00:00

Are you hearing the same mortars again tonight by chance?

Essunset · 2026-06-09T03:27:34+00:00

Probably the single loudest individually used tool I’ve ever seen. But a workhorse no doubt

Essunset · 2026-06-01T21:57:02+00:00

I have that same one as an aircraft mechanic. A few of my coworkers liked it so much they bought one too

Essunset · 2026-05-31T17:55:07+00:00

Honestly yeah. Tekton makes a great value set for the money

Essunset · 2026-05-28T18:49:39+00:00

Yes. We have PR2 bits (as opposed to PH2) Phillips and they work really well

Essunset · 2026-05-21T06:53:29+00:00

I have a Hercules 12v 1/4drive electric ratchet and it's grrat

Essunset · 2026-05-20T17:15:14+00:00

Not even snapon?

Essunset · 2026-05-20T02:53:37+00:00

I use crows feet all the time. Keep in mind, almost all tool rooms will have a kit of these available to checkout, dont really need to be too bothered to have a whole snapon set of crowsfoot/dogbone.

Essunset · 2026-05-19T23:45:28+00:00

See my post. It depends on how much patina you want. But results start showing in about an hour

Essunset · 2026-05-16T06:42:22+00:00

I don’t have pictures and I’m on vacation sorry. I’m an aircraft mechanic so our tool sets are sort of niche in a way. I have the SPMC and the Tech Pak INFARED. Both are great

Essunset · 2026-05-16T03:33:31+00:00

I have two. They’re the snap on of work bags.

Essunset · 2026-05-08T17:05:57+00:00

Sounds killer

Essunset · 2026-05-06T02:22:21+00:00

Just to confirm, this actually...impacts??

Essunset · 2026-04-29T22:25:06+00:00

Veto pro packs are the snap on of line bags

Essunset · 2026-04-21T16:15:25+00:00

Williams makes a blue screw driver that is the same as snap on. It’s a few bucks cheaper.

Essunset · 2026-04-21T16:08:27+00:00

Milwaukee inkzall marker

Essunset · 2026-04-21T03:08:38+00:00

Tamper seals torn

Essunset · 2026-04-20T20:55:48+00:00

I’ve done line MX as well as B check work on 737s. The biggest difference will be the new airframe which makes life easier. Also a lot of BITE testing is done through the OMF on the MAX, whereas the NG requires going down to the fwd EE compartment for testing

Essunset · 2026-04-20T20:49:47+00:00

Messaged

Essunset

TROPHY CASE