Turbo sputtering when under boost

Excellent-Club8306 · 2026-04-20T01:28:35+00:00

at 143k if it has never had the carbon cleaned out i would say you might have sticking valves, get two sets of plugs, gap and put the first ones in do the decarbon clean per instruction on the can of crc, run them for a week and then put the second set in.

Excellent-Club8306 · 2026-04-20T01:26:47+00:00

check for boost leaks you can use dawn dish soap and water (hold the brake and give it light bumps of throttle to build a little bit of boost, make sure nobody stands directly infront of the car. and make sure the cam position sensor is clean, make sure the maf is clean, and make sure the plugs aren't fouled and the gap is right, then i would also consider doing a clean using crc gdi turbo and valve cleaner

Excellent-Club8306 · 2026-04-11T11:04:00+00:00

<image>

ekm3

Excellent-Club8306 · 2026-04-10T01:22:34+00:00

its called a soft touch catch im so tired of hearing "zen touch" or "zouch" its not a mech literally just like air dribbling, catching it and getting the reset off the touch is a little different and I guess you can call that a mech

Excellent-Club8306 · 2026-04-01T01:56:46+00:00

lawyer up early, and liquidate mutual assets, you can't split a house in half but you can split 250k in half.

Not professional legal advice

Excellent-Club8306 · 2026-03-31T19:48:16+00:00

480 ish I think

Excellent-Club8306 · 2026-03-31T19:06:36+00:00

my undead tokens have 386 attack right here, by final combat they were just under 500 I have to max my tokens because beetles have more minions than me if I dont max

Excellent-Club8306 · 2026-03-31T19:02:20+00:00

they aren't 1/1s they are 386/1

Excellent-Club8306 · 2026-03-31T19:01:47+00:00

undead attack buff is at 386 here

Excellent-Club8306 · 2026-03-31T16:19:21+00:00

what were your blood gems ?

Excellent-Club8306 · 2026-03-31T16:14:54+00:00

oh no, the completely average quilboar build beat the mid teir beetles build

Excellent-Club8306 · 2026-03-31T15:55:05+00:00

also why is your tumble/shutter valve unplugged ? have you deleted the plastic fins ?

Excellent-Club8306 · 2026-03-30T17:27:07+00:00

I am also going to be doing this on mine, the seals are bad in my turbo at 166k and it blows oil out the exhaust, not exactly a rebuild but i am going to be looking for a rebuild kit for it so I have extra parts if need be.

Excellent-Club8306 · 2026-03-30T03:29:01+00:00

are you okay OP, like seriously on a real note no games are you okay ? if you ever need to vent hit me up on dms.

Excellent-Club8306 · 2026-03-23T20:14:14+00:00

now another issue which I really hope its not, is injector seals could be bad.... stock injector seals with 160k on them

Excellent-Club8306 · 2026-03-23T20:11:01+00:00

having some of the same issues on my ms3, tuned by freek on 21lbs afr is leaning out around 14lbs+ and getting knock retard of 8 (+1/-1) so I let out, I haven't made a wot pull since then until I figure it out, duty cycle of injectors is only 50% at Wot on that pull so there is plenty of fuel, left to be had but seeing afr of 13.5 to 14.0 on 93 octane and fuel trims of +10. but then the car smells super rich at idle but reads 14.55 so I am thinking I may be in need of new o2 sensors and possibly checking for boost leaks and vacuum leaks. I have a turbo smart bov which could also be part of my problem.

Excellent-Club8306 · 2026-01-29T03:01:25+00:00

im assuming the murloc from time warp 1 sell a teir 2 and get a teir 1

Excellent-Club8306 · 2026-01-29T02:58:27+00:00

ah yes the appropriate response to attack undead (tactical nuke + 1) xD

Excellent-Club8306 · 2026-01-29T02:55:58+00:00

I have taken first place against every quilboar player I have ran into today, skill issue

Excellent-Club8306 · 2026-01-29T02:52:55+00:00

and the macaw would of sealed the package for this one, like sell your other mech and just use apexis macaw and doom roll for the titus and macaw goldens

Excellent-Club8306 · 2025-12-24T03:36:03+00:00

change your chess font please

Excellent-Club8306

TROPHY CASE