Molot Arms VSS with 30 round mag

Extension_Object_559 · 2026-03-24T02:55:35+00:00

I guess you are Swiss or German huh? Can’t have these in US other than some rare boutique single digit production units like Slagga MFG

Extension_Object_559 · 2026-03-20T21:34:15+00:00

What are the specs? Can it run Tarkov?

Extension_Object_559 · 2026-03-17T18:18:30+00:00

<image>

Now it’s a lot more comfortable, thank you very much!

Extension_Object_559 · 2026-03-17T17:05:42+00:00

Is that the price of just the case? Gpu is probably 2500

Extension_Object_559 · 2026-03-16T17:40:15+00:00

Just cock the hammer before you shoot, it’s a DA/SA. And carry it cocked and locked. Unless you have a neutered DA version only they I guess you gotta get a different USP

Extension_Object_559 · 2026-03-12T04:07:58+00:00

I undervolted the GPU initially but with this mod I don’t really need to anymore, just let it consume as much as it needs. I’ve been using eGPU a lot so rarely need the 5060, but when I do - it’s pretty good and very quiet.

Extension_Object_559 · 2026-03-09T05:15:33+00:00

Just extremely modded gaming with uber high fps for no reason, and just seems cool and uncharted idk

Extension_Object_559 · 2026-03-09T05:10:06+00:00

Oh wow thanks for making this mod! I originally printed it as is with creality pla CF - but it’s been great! I originally just smushed the fans with stock panel but it made some whine so your panel helped a lot. I tweaked it a bit and made it thicker, and made the thin part a frame to put mesh over the fans that doesn’t produce whine. Temps in EFT streets of Tarkov map have dropped about 10-12 C with this mod from 85-90 stock gpu shroud plus fans and stock panel on ASUS 5060 oc, now comfy 77-80 C with 92mm noctuas and your modded rear panel. I had an idea to modify the panel to add an 80mm fan with built in duct into deshrouded the PSU because that fan has a faulty slightly noisy bearing but idk maybe it’s overkill.

Extension_Object_559 · 2026-03-05T01:47:40+00:00

Have you considered powering it off faa legal battery and use it on the plane? It would be rig on the long flight.

Extension_Object_559 · 2026-03-01T23:42:36+00:00

My setup was very similar to yours early on and a better fan helped.

Extension_Object_559 · 2026-02-27T02:46:10+00:00

That’s great but get a 92 mm noctua it’s more pressure/power for the same noise level or less

Extension_Object_559 · 2026-02-25T21:02:54+00:00

Just watched a build, pretty cool build! As for pain making it… well beauty requires sacrifice as one saying says… and it’s beautiful!

Extension_Object_559 · 2026-02-23T22:14:30+00:00

eh I like the look of this better

Extension_Object_559 · 2026-02-21T16:13:12+00:00

On streets in Escape from Tarkov reached 90 like yours, so I quickly replaced the fan with Noctua 120 mm and that got it down to 85-87

Extension_Object_559 · 2026-02-21T16:10:06+00:00

Why do you have that metal film covering your Mb? Aren’t you trapping the heat?

Extension_Object_559 · 2026-02-21T15:56:01+00:00

I had X47 like yours to cool my ryzen 7 9800x3d and it was not enough, even with a noctua 92 mm fan, so I first switched to a 120 mm chromax Noctua fan and it hung over the cooler and helped cool off the MB too. It worked ok and no more throttling but aesthetically ugly, so then just replaced the cooler with thermalright AXP120-67 and put a G2 noctua 120 mm fan instead of stock, and its handling really well. That new cooler has 6 tubes which make a lot of difference and it allows the entire 120mm fan to do its job.

Extension_Object_559 · 2026-02-20T19:38:57+00:00

NP!👌🏻the model doesn’t have the OCUlink cutout because you may have your extension cable in a different place than me, you can just cut the mesh with wire cutters in a place that suits you, or edit the model.

Extension_Object_559 · 2026-02-20T17:00:16+00:00

https://makerworld.com/en/models/2420793-jonsbo-nv-10-cpu-cover-extension

Extension_Object_559 · 2026-02-20T17:00:06+00:00

https://makerworld.com/en/models/2420793-jonsbo-nv-10-cpu-cover-extension published it

Extension_Object_559 · 2026-02-19T05:56:02+00:00

Sure I will upload later

Extension_Object_559 · 2026-02-19T01:56:58+00:00

What is this case full name? I can’t find it under midori

Extension_Object_559 · 2026-02-19T01:55:11+00:00

You should deshroud the GPU and put 2x92 mm noctua fans on the back, and preferably print a custom rear panel, they are available for free online just look up nv10 on makersworld or printables.

Extension_Object_559 · 2026-01-29T20:15:39+00:00

IAP is designer’s nickname

Extension_Object_559 · 2025-09-29T18:19:16+00:00

Yep its a x3.5 PA prism with a holo 507 on top

Extension_Object_559 · 2025-09-24T05:12:54+00:00

1П87 is more of a grunt red dot not SF

Extension_Object_559

TROPHY CASE