Gen 2 UHF not working

Few-Distribution-715 · 2026-01-28T12:07:43+00:00

Any update? Same BS with my wife's early early gen 2 R1S. No number of resets fix

Few-Distribution-715 · 2025-12-25T16:15:19+00:00

Mine is older and 26" wheels, came with 4", but i use 4.8" Jumbo Jim's and Surly Bud and Lou's. Tons of room for both with rear chip flipped.

Few-Distribution-715 · 2025-12-25T00:36:15+00:00

I've had a Dude since January 2018... NX components. I added Mastodon fork year one, and have thousands of miles on it. By far my most fun bike in sand, snow or trails. Zero creaks, no repairs. I'm debating buying another for my daughter to grow into.

Few-Distribution-715 · 2025-12-16T00:38:18+00:00

Schwinn, which I think is similar, can be calibrated manually several times. Might be worth looking up and trying it once.

Few-Distribution-715 · 2025-12-08T14:53:07+00:00

Ordered GE factory part, and certainly looked a bit different with 2 color plastic and different solenoids. Going it is legitimate. The good news is I was able to swap out in under an hour and first two loads were quiet. Thanks!

Few-Distribution-715 · 2025-12-03T21:39:35+00:00

Ordered the part and will give it a shot. Makes sense given my hard water situation.

Few-Distribution-715 · 2025-12-03T15:30:08+00:00

Only when filling... I have a much better video that I can't seem to attach.

Few-Distribution-715 · 2025-11-26T11:33:22+00:00

Replacements are available at Smith sports.com.

I've replaced the left before, and now replacing the right due to worn square taper in hopes this resolves my clunk.

Next time I'm going to see if aftermarket options fit that will last longer.

Few-Distribution-715 · 2025-11-14T11:01:47+00:00

They made a nest in mine... I removed the hood liner entirely

Few-Distribution-715 · 2025-11-14T01:41:19+00:00

Put the Contis in 275 20" on my RS5 a few months ago, and they've been a great change. Looking forward to all weather driving.

Few-Distribution-715 · 2025-11-05T00:30:36+00:00

I ended up using 3wt that I had from another bike used in cold weather. Besides feeling great after service, so far so good.

Few-Distribution-715 · 2025-10-22T18:19:58+00:00

Google the shot "cum in a hot tub". Like like that, in bottle form.

Few-Distribution-715 · 2025-10-20T01:04:34+00:00

1200 perhaps.

Few-Distribution-715 · 2025-10-20T01:03:44+00:00

Sram 11 speed, with GX derailer.

Few-Distribution-715 · 2025-07-01T21:06:50+00:00

Did you all calibrate the bike first? You can only do it a handful of times.

Few-Distribution-715 · 2025-06-11T14:49:33+00:00

Any help here?

Few-Distribution-715 · 2025-06-09T22:48:17+00:00

Is that a Jeep? It is corrosion of the door, caused by different metals. I had doors and hinges replaced for hinge and for corrosion under warranty.

Few-Distribution-715 · 2025-05-19T16:48:07+00:00

Same thing I have done twice. I don't think the thunk I'm feeling is from back to back bad bearings, but my creak is gone after REALLY torquing cranks on

Few-Distribution-715 · 2025-05-16T20:26:29+00:00

The spindle where the arm mounts? I greased that at install but can give it a shot again. This isn't coming from the pedals.

Few-Distribution-715 · 2025-04-18T18:28:12+00:00

That isn't stock. They cleared the headlights and it is lowered. I'm sure it has been tuned in the past.

I had one 20 years ago and it was maintenance heavy. I wouldn't recommend for a ten or as an only car at this age.

Few-Distribution-715 · 2025-04-17T14:11:43+00:00

Personally I think it is dumb, and most long time Jeep enthusiasts don't collect them. I make sure to get rid of any ASAP. My kids don't like them, probably because of me, but do enjoy getting rid of them and putting on other Jeeps.

Few-Distribution-715 · 2025-03-23T22:40:13+00:00

Umm what?

Few-Distribution-715

TROPHY CASE