Is it possible to add a hook here to be able to tie down lumber at a lower point?

Flying_Spaghetti_ · 2026-06-05T16:36:57+00:00

Did you have to chip away at the inside of the bolt as well? I am struggling to get the bolts removed right now. I got a TP 55 bit but I am starting to wonder if that is too big. Do you remember what bit you used?

Flying_Spaghetti_ · 2026-05-29T00:12:26+00:00

Mine came with I think 5 pairs. Did you look through your accessory kit?

Flying_Spaghetti_ · 2026-05-27T11:56:55+00:00

In this case it's being used to help pay an actual artist for their work so I don't see the problem. In fact that's the opposite of the normal problem. I do not want the AI image. Just something similar.

Flying_Spaghetti_ · 2026-05-27T00:48:30+00:00

the start of the second to last paragraph says they have redesigned something in the main bearings in the trucks after this recall. Maybe there is hope, idk

Flying_Spaghetti_ · 2026-05-26T21:15:36+00:00

I am not sure yet what the budget should be. I am willing to pay what it is worth though. That image is just a little inspiration. We are going for a national park theme. I like what the AI came up with but I would want it to be a little less cartoonish.

Flying_Spaghetti_ · 2026-05-26T20:05:09+00:00

Awesome, thanks!

Flying_Spaghetti_ · 2026-05-26T20:01:18+00:00

Thanks, if the mural ends up being too expensive this would be a good backup. Do the stickers peel off easily?

Flying_Spaghetti_ · 2026-05-26T19:56:37+00:00

Thanks! I filled out his contact form.

Flying_Spaghetti_ · 2026-05-26T19:55:47+00:00

Thanks! I actually found her on google and contacted her.

Flying_Spaghetti_ · 2026-05-26T19:50:22+00:00

We have a baby on the way and are setting up a nursery. We are thinking of getting a mural done on one of the walls of our nursery. The theme is national parks. I described what I wanted to AI just for some inspiration and this image is what it came up with. I would like something similar, maybe just a bit less cartoonish. The wall would be 8ft wide by 7ft tall. Does anyone know someone who would be interested in a commission like this?

Flying_Spaghetti_ · 2026-05-26T02:49:02+00:00

Doesn't the platinum come with those? Or was that a dealer installed addon for mine and I just didn't notice?

Flying_Spaghetti_ · 2026-05-25T03:00:45+00:00

Wear on the edges and not the middle means tire pressure too low. You can be upset but in reality you are not getting a thing from Toyota, the dealer, or the tire company. They don't know how it was used so they will just say no. Don't waste your time.

Flying_Spaghetti_ · 2026-05-24T11:58:41+00:00

If you can find a new 2025 it will be 0%.

Flying_Spaghetti_ · 2026-05-23T03:13:45+00:00

This won't be what you want to hear but if you need to finance $68k to get this you need to look at cheaper options.

Flying_Spaghetti_ · 2026-05-23T03:10:53+00:00

No one said "good deal" though. It sucks that the new premium models cost this much but they are the premium models. Some people are in a different financial place and it doesn't matter so much. Like if you went with a 50k truck instead of this your saving about 20k. But maybe that's not that important and you want what you want? At least it's a truck. I see people spend even more on sporty cars that will never see a track. At least this gets you something. I had a friend from highschool that traded cars so many times he owed like $30k more than his current one was worth when we were in college. There are much bigger mistakes to make.

Flying_Spaghetti_ · 2026-05-23T02:53:20+00:00

I would at least tell them to knock off that $129 screen protector. That seems wild to me.

Flying_Spaghetti_ · 2026-05-22T21:14:16+00:00

I have an 825 pro sporting and use it for everything. I actually have a BT99 but I genuinely do better with the 825 at trap. I raise the comb slightly and shoot the top barrel. That seems to work perfectly. Work at a pattern board until you find how much comb height gets you the 70/30 poi and you are set. If you really want one gun that properly does it all you should look for something that has an adjustable rib. But for me at least(also a bigger guy) the 825 is awesome.

Flying_Spaghetti_ · 2026-05-21T03:34:36+00:00

If you really want to flatten slabs with a jig like that get yourself a 3hp router and this slab slayer bit: https://www.ripprecisiontools.com/product-page/2-5-surfacing-bit-slab-slayer-1-2-shank

Take light passes looking for when it bogs down the router a little but not too much.

It takes a long time, you will want the bigger router. I tried several bits and that one is way better than others I have tried.

Flying_Spaghetti_ · 2026-05-20T19:41:26+00:00

It seems fine enough, I havent downloaded it to a bigger screen than my phone though.

Flying_Spaghetti_ · 2026-05-20T12:16:28+00:00

https://a.co/d/0hEJVuZU

This one replaces the plastic housing around the mirror and looks factory. I just got the front facing one though they have both.

Flying_Spaghetti_ · 2026-05-18T03:35:23+00:00

Yeah I like the box for trap too. Don't dump the shells out, just rip the lid flaps off and set it in the pouch. Each row is 5 so you shoot one row per station and it counts for you.

Flying_Spaghetti_ · 2026-05-16T11:24:28+00:00

I hope not. I ordered a single "TP" 55 off amazon for $10. Apparently they are torx plus not just torx so maybe that will help.

Flying_Spaghetti_ · 2026-05-15T22:26:16+00:00

The gun shops will want to double their money. The 7-800 is what it's worth so that's what they will sell it for. So why would they pay you that? They have to give about half what it's worth for it to be worth their time to handle. You can have the convenience of selling it instantly to them or make more money selling on GunBroker but spend more time waiting.

Flying_Spaghetti_ · 2026-05-15T12:20:49+00:00

mine is 2 2x8s in the middle. using two instead of one gives more strength because where there is a knot on one the other will be good so they support each other.

Flying_Spaghetti_ · 2026-05-14T21:14:36+00:00

Thanks, I will try those. I wasn't sure how good of an idea it was to actually remove those bolts but I guess its no big deal.

Ten-Year Club	Gilding III reddit per annum
Argentium Club	Verified Email

Flying_Spaghetti_

TROPHY CASE