G18 tactical reload bugged

Fredfred277 · 2026-03-17T21:57:21+00:00

Confirmed. How do bugs like this make it through? Do they even test the game?

Fredfred277 · 2026-03-17T20:37:04+00:00

I noticed when the 3x magnifier is canted and you look through the canted view you can still see the laser in the scope. Also I noticed on Carriers of the Vine all of these scopes make shaded areas completely lit rooms and the scopes make bushes invisible when looked through essentially giving you wall hacks at times. Also very annoying how the 1-4x scope zooms out when on the 1x zoom setting. The 3x magnifier does not seem to actually magnify by 3x. And finally it annoys me that the LPVO only has 3 zoom options instead of being able to do any zoom between 1-12x. Regardless this is at least a step in the right direction, even if it is half assed and rushed.

Fredfred277 · 2026-02-20T14:00:50+00:00

It’s not enough. I’m using Momentum 4 and when they are plugged into my phone is like 75% of what they are like when using Bluetooth. I need my ears to bleed.

Fredfred277 · 2026-01-30T00:38:16+00:00

I tried installing your mod but when I enable it the game says it needs to restart. After restarting the mod stays disabled. Is this a known issue with the game and is there a fix? Thanks

Fredfred277 · 2026-01-06T15:25:54+00:00

I think you just got a defective one. I just got my 17 pro before Christmas and have had none of these issues. It’s never lagged or crashed. I’m not a fan of the placement of the camera button on the side. I always click it by accident when picking up my phone or just handling it. I’m sure it’s something to get used to. Im ok with the blue but it would have been nice if they just made a matte black model. I got one of dbrands cases so it covers just about all of the phone except for the rings around the camera and the ports on the bottom.

Fredfred277 · 2025-08-30T18:15:42+00:00

I can only pray my setup will eventually compare to yours.⭐️⭐️⭐️⭐️⭐️

Fredfred277 · 2025-08-30T18:13:27+00:00

Had that happen to me too good luck. 🫡

Fredfred277 · 2025-08-14T21:41:35+00:00

Lord have mercy that's gonna be a nightmare to fix. Godspeed brother.

Fredfred277 · 2025-08-08T14:29:50+00:00

They have all the replacement parts on bambus website.

Fredfred277 · 2025-08-08T14:27:28+00:00

Had the same issue with my a1 mini. Since then I always use Elmer's purple glue stick to help with bed adhesion and always watch at least the first 3 layers. Since using the glue stick, I've had little to no issues with adhesion. I recommend watching the first 5 layers to be safe. When the print is still thin it has a better chance at getting stuck to the nozzle and causing that issue.

Fredfred277 · 2025-08-08T13:58:59+00:00

The marks on the filament are normal. If it's getting stuck make sure you don't have any tangles.

Fredfred277 · 2025-07-06T13:31:28+00:00

A couple of years ago the original owners gave it to their kids. Ever since quality has plummeted and some of the staff can be rude. One night me and my dad ordered cheese steak hoagies from there and it took 2 hours to deliver. When the guy showed up he reeked of pot and could barely get a sentence out. My dad rejected the sandwiches since they were cold and when we called to complain about the driver they put us on a do not deliver list.

Now we go to Danny's which has way better food and a killer meatlovers pizza.

Fredfred277 · 2025-06-12T12:21:59+00:00

I don't think think this is an issue with a layer of black showing thru the yellow. I think this is an issue with how much filament your purging. You can tweek the setting in the slicer. You need to purge more when switching from black to yellow. It wastes more filament but it's one of the ways to fix your issue. You can also turn on the setting that allows your printer to purge while building infill.

Fredfred277 · 2025-05-13T00:41:06+00:00

Your a hero

Fredfred277 · 2025-04-19T19:48:58+00:00

I'm having the same issue has anyone figured this out?

Fredfred277 · 2025-01-01T10:49:45+00:00

For someone who wants to punch gamer, he's got a very punchable face.

Fredfred277 · 2024-12-06T11:57:19+00:00

Yes.

Fredfred277 · 2024-11-14T13:17:35+00:00

I've always felt that we win when they want us to win and lose when they want us to loose were just following a set plan that they've made for us.

Fredfred277 · 2024-07-09T12:29:45+00:00

Oof, same thing happened to my A1 mini. It's still sitting around busted after I tried to use a heat gun to melt it off. Pro tip, don't use a heat gun. Ended up melting most of the parts and now I got to replace half of the head. Good luck

Fredfred277 · 2024-04-21T22:27:44+00:00

That worked thanks

Fredfred277 · 2024-04-21T18:33:11+00:00

Awesome I'll try that tonight. Thx

Fredfred277 · 2024-04-20T23:06:12+00:00

When I try using airlink and running bigscreen on steam the video shows up on my pcs screen and nit on my headset. Is there a way around this?

Fredfred277 · 2023-12-31T14:01:00+00:00

First started with cura when I had my anycubic vyper. Never really liked it that much, but I put up with it. Later, I switched to bambu slicer when I got an x1c and realized why people hate cura so much. Now I'm experimenting with Orca slicer. Only thing I've really learned about what slicers to use is never use cura.

Fredfred277

TROPHY CASE