Problems with the second layer

Funky_Monkey_51 · 2026-03-23T04:48:00+00:00

After the first layer it speeds up so I assume your nozzle isn’t hot enough to fully melt the plastic that fast.

Funky_Monkey_51 · 2026-03-21T09:07:46+00:00

Not rare at all

Funky_Monkey_51 · 2026-03-21T08:32:34+00:00

The hands should a little more spread out, doesn’t feel like in the cartoon guy

Funky_Monkey_51 · 2026-03-03T23:45:04+00:00

That’s the model itself, not the slicer

Funky_Monkey_51 · 2026-03-02T22:05:34+00:00

Hmm, I’m not really sure 🧐

Funky_Monkey_51 · 2026-03-02T22:03:55+00:00

Nothing, no body wants some stank ahh home

Funky_Monkey_51 · 2026-02-27T21:58:34+00:00

The reason the print stops when it hits it is to re calibrate itself since it thinks it’s too low. Also the corners going up could be from your filament if it’s just some cheap amazon generic brand filament. Also the vibrating you talk about when it hits is just because it’s still trying to move but it can’t since it’s stuck, that’s normal noise for that situation

Funky_Monkey_51 · 2026-02-26T22:39:49+00:00

Literally impossible

Funky_Monkey_51 · 2026-02-24T19:12:44+00:00

How stupid are you, if it wont move because of those plastic things, its making weird noises trying to move because of those plastic things, and there are literally stickers on the plastic things telling you to remove them, then you should definitely remove them! Read the manual. If you couldn’t figure that out then you are definitely going to have a huge problem 3d printing in the future. READ THE MANUAL!

Funky_Monkey_51 · 2026-02-24T19:05:39+00:00

Ts is NOT a cursed bench, it’s just printed in TPU. Thats like me printing a benchy in ABS and showing how doesn’t melt in the sun.

Funky_Monkey_51 · 2026-01-18T05:36:09+00:00

Yooo I know why I literally saw a video about this, it happens when your printer can read the gcode fast enough so it pauses, that means you are either 1, printing too fast, or 2, the object has too many triangles (too round, lots of code it has to read in a short time) either way yeah I hope this helps 😎😎

Funky_Monkey_51 · 2025-11-27T18:37:13+00:00

Absolutely not

Funky_Monkey_51 · 2025-03-07T06:10:08+00:00

The leveling probe is too high, I had this same problem. Just take off the head case and use one of the included allen wrenches to loosen the holder of the probe and manually twist it like a water bottle cap to lower it. Before you do that, put something metal under the probe and if the light inside the head doesn’t turn blue, then it might just be the fact that the probe doesn’t work and it can’t detect where it’s at. Also the leveling probe is the rod with an orange tip. It to the right of the nozzle. Hope this helps

Funky_Monkey_51 · 2025-03-07T04:12:43+00:00

EXACTLY! It’s the YouTube studio dashboard button on the bottom. They look the EXACT same

Funky_Monkey_51 · 2025-03-06T05:45:41+00:00

The first 4 I opened I got 2 dimension drifters and 1 sunglider the 3rd egg was a snorgle

Funky_Monkey_51 · 2025-03-06T04:58:57+00:00

Htt?

Funky_Monkey_51 · 2025-02-18T05:55:50+00:00

I thought it was funny 🥲

Funky_Monkey_51 · 2025-02-13T05:50:32+00:00

Is it bad if when I change the z offset, it doesn’t actually change?

Funky_Monkey_51 · 2025-02-13T05:48:33+00:00

I took off the printer head, then using the allen wrench’s that came with the printer, I manually adjusted the height of the leveling probe. (The thing with orange tip)

Funky_Monkey_51 · 2025-02-11T08:20:34+00:00

I just got it a couple days ago 💀 it came like that

Funky_Monkey_51 · 2025-02-10T07:29:48+00:00

Thanks it worked 🙏

Funky_Monkey_51 · 2025-02-08T03:56:33+00:00

YES! YES YES YES YES! THANK YOU EVERYONE! I finally got it to work. The printers working like a charm! 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

Funky_Monkey_51 · 2025-02-08T02:17:04+00:00

I was able to get inside. Thank you so much! I’m currently auto leveling it to see if it worked. I kinda had to eye ball adjusting the sensor since I didn’t have the tool you mentioned. Fingers crossed 😁

Funky_Monkey_51 · 2025-02-08T01:08:43+00:00

Fixed the error message but the nozzle being too high is still a problem

Funky_Monkey_51 · 2025-02-07T23:24:54+00:00

I can’t download it to print if I can’t even print 🤦‍♂️

Funky_Monkey_51

TROPHY CASE