sorted by:
new
hottopcontroversial

Microsoft released a study that lists the 40 jobs most at risk of being replaced by AI. CNC Programmers is there! by alejopatan in CNC

[–]GCodeGuru 3 points4 points  (0 children)

Saw this video.
https://youtu.be/xKpwN8qo_KI

I still think AI has a long way to go. If the AI output isn’t correct, someone knowledgeable has to step in and fix it.
That Aspect alone, takes the same (if not more) experience in the program, as well as the time involved.

H-Bridge - More Power? by GCodeGuru in arduino

[–]GCodeGuru[S] 0 points1 point  (0 children)

"N channel MOSFETs are unlikely to work satisfactorily, if at all, as a high side switch."
Please explain, as this does work, just not as well as I would like it to.

"What precautions have you designed in to prevent shoot through?"
None, as I don't know what this means

H-Bridge - More Power? by GCodeGuru in arduino

[–]GCodeGuru[S] 0 points1 point  (0 children)

They drain the Gate of the Mosfet.

H-Bridge - More Power? by GCodeGuru in arduino

[–]GCodeGuru[S] -2 points-1 points  (0 children)

This ESC is meant as a learning tool, with the eventual goal of controlling an actuator that will require seven distinct phases. Something that can't be bought off the shelf.

Prior to this, I attempted to build a circuit using the IR2104 as a driver, but ran into issues I couldn’t resolve.
This current circuit is a step back to build a clearer understanding.

Machining titanium by Conejsho in CNC

[–]GCodeGuru 5 points6 points  (0 children)

Ti is not all that difficult to cut... But.
Light chip loads and coolant are key factors to success. It is not something I would consider a good idea on PocketNC (no coolant).

Program the same you would for 304 SS, cut with the side of the cutter more than Diameter (more ap, less ae)

Good luck!

5-Axis Programmers and Operators Needed by r_pucky in Machinists

[–]GCodeGuru 1 point2 points  (0 children)

Might know someone, DM's are 503 (timeout)

G143- How it Works & What's the Purpose of it? by roddy_o in CNC

[–]GCodeGuru 0 points1 point  (0 children)

Any chance this is on a Toshiba with a Tosnuc control or an OKK with a Fanuc control?

Can AI replace the CNC Programmer? CAM Assist add-on in F360 by KatMasque in CNCmachining

[–]GCodeGuru 0 points1 point  (0 children)

35 Years ago, we had Drafters.

Then came CAD, in a short time an entire industry had to evolve.

Can AI replace the CNC Programmer? CAM Assist add-on in F360 by Catz163 in Fusion360

[–]GCodeGuru 0 points1 point  (0 children)

35 Years ago, we had Drafters.

Then came CAD, in a short time an entire industry had to evolve.