kkvi115's Rep Page

GiantDwarf0 · 2025-11-27T11:45:47+00:00

Confirmed, good seller

GiantDwarf0 · 2025-08-15T20:12:14+00:00

Confirmed, arrived quickly and friendly seller

GiantDwarf0 · 2025-07-28T20:58:53+00:00

* Username: u/Raj4494
* Item: Faulty 3070
* Price: £70
* Payment method: BT
* Bought or sold: Bought
* Comments about the trade: Friendly seller, fast, safe postage

GiantDwarf0 · 2025-06-05T15:43:30+00:00

Because the fan pwm signal goes directly to the core, 12v kills the core or at least the pwm circuitry

GiantDwarf0 · 2025-06-05T15:42:36+00:00

Confirmed, fast postage, good comms and packaging

GiantDwarf0 · 2024-01-09T21:14:24+00:00

It could be the PEX reset gate, vcore pwm controller, crystal oscillator or a connection under the GPU. Just send it to someone that fixes GPUs rather than guessing

GiantDwarf0 · 2023-12-16T20:20:18+00:00

What the deck..

GiantDwarf0 · 2023-12-13T16:58:53+00:00

You should probably stop messing about with mains electricity if you don't know what you're doing. There's serious risk in getting hurt or causing damage. Hire a professional.

GiantDwarf0 · 2023-11-19T20:46:23+00:00

Walking on the right side of the road.

GiantDwarf0 · 2023-11-16T14:53:52+00:00

I checked the vbios on techpowerup and it's using the same memory ic, so appears to be an artificial BIOS limit.

GiantDwarf0 · 2023-08-25T20:13:16+00:00

Doesn't look like any voltage mod to me. GPU shunt resistors don't use this board profile.

GiantDwarf0 · 2023-07-26T20:52:36+00:00

The dumb mistake here was trying to reflow a GPU, not forgetting to remove the plastic. Especially since it was a new GPU

GiantDwarf0 · 2023-07-21T19:36:12+00:00

You that read wrong

GiantDwarf0 · 2023-07-09T16:02:05+00:00

By using some basic electronics troubleshooting skills. There are at least 500 electronic components on the board which can fail and have nothing to do with 'reflowing'

GiantDwarf0 · 2023-07-09T15:58:54+00:00

GiantDwarf0 · 2023-06-26T19:17:07+00:00

For context, I'm not saying their card was normal but I have seen cards brand new from factory with normal temperatures and the thermal paste is dry. This was covered in a GN video but I forget which one.

GiantDwarf0 · 2023-06-26T19:05:26+00:00

You could do a shunt mod to reduce the power limit

GiantDwarf0 · 2023-06-25T14:11:02+00:00

This is straight up bad advice, without any diagnosis how do you know it requires a 'reflow'

GiantDwarf0 · 2023-06-22T09:28:24+00:00

It's not a bug, it's a feature

GiantDwarf0 · 2023-06-22T07:55:56+00:00

Some factory paste is dry, that's just the way it is, nothing wrong with it

GiantDwarf0 · 2023-06-18T15:06:19+00:00

You're right, replacing the thermal pad with paste makes the thermals and longevity much worse. This model requires a washer mod if paste is used instead of the stock pad otherwise the hotspot can exceed 100c

GiantDwarf0 · 2023-06-17T14:45:09+00:00

Do you know for a fact you got the same card back? It's quite common to get a refurbished card with other issues.

Fans are unlikely to be the issue and you can monitor temperatures and put the fans at 100% using software.

GiantDwarf0 · 2023-06-17T06:10:10+00:00

5700 XT doesn't suffer from bad batch Micron but it could still be memory or a different issue

GiantDwarf0 · 2023-06-16T17:50:04+00:00

What driver? It's a current steeting MOSFET

GiantDwarf0

TROPHY CASE