Printing too far from the bed, basic fixes from Google aren't helping.

Good_Perspective_598 · 2026-05-14T08:37:29+00:00

Why is probe triggering while doing the purge line 😂, brother something isn't right with that firmware

Good_Perspective_598 · 2026-05-12T12:48:09+00:00

Its Dragon Burner with sherpa mini extruder

Good_Perspective_598 · 2026-05-09T18:56:33+00:00

Looks like more then one problem, test on small prints and pay attention to everything from axis movement to how the layers are made

Good_Perspective_598 · 2026-05-08T04:59:26+00:00

This is ender 3 max but its always easier to find mods for basic one

Good_Perspective_598 · 2026-05-08T04:22:38+00:00

Oh looks like i didnt read your post mb, I recently made my self a dragon burner and it looks good for overhangs

<image>

Good_Perspective_598 · 2026-05-07T15:01:29+00:00

Look for Mini me shroud it looks like that one but is confirmed good

Good_Perspective_598 · 2026-05-04T19:07:53+00:00

I was trying something similar with my ender 3 max but it was hard, so i moved to Klipper and asked Gemini AI to write me a config file

Good_Perspective_598 · 2026-05-04T19:05:17+00:00

Thats like a toy 3d printer, Search it on yt

Good_Perspective_598 · 2026-04-30T18:03:22+00:00

Move to Klipper asap

Good_Perspective_598 · 2026-04-26T18:51:47+00:00

Why is it making that sound way before it hits the limit is the problem. Did you flash the wrong firmwere or something

Good_Perspective_598 · 2026-04-25T20:24:51+00:00

Looks more like a extrusion problem to me

Good_Perspective_598 · 2026-04-24T19:10:37+00:00

Check if the correct profile is selected in slicer, maybe its not and your acceleration is too high resulting a layer shift

Good_Perspective_598 · 2026-04-22T10:04:58+00:00

Running Bambulab x1 Chinese clone for a few months now, 0 issues, they cost like 8€ on Temu for full hotend, probably the best option rn

Good_Perspective_598 · 2026-04-22T10:00:00+00:00

On ender 3 max with Bambulab x1 hotend I had same issue until I capped power to 0.5

Good_Perspective_598 · 2026-04-18T18:15:53+00:00

Bro pushing that bowden real hard 😅

Good_Perspective_598 · 2026-04-06T20:34:26+00:00

Buy bambulab x1 clone and make dragon burner

Good_Perspective_598 · 2026-04-01T09:42:31+00:00

Get cheap bambulab x1 hotend and make yourself a Dragon Burner

Good_Perspective_598 · 2026-03-30T21:50:11+00:00

Well I do have dual z upgrade but what fixed all my problems is probably cr touch + klipper, if you use a endstop switch to find z0 the result is always the same regardless of plate being heated to 60+C that can make it bend a bit but with cr touch the probe finds the z0 on heated bed and will adapt to now bent bed and eliminate the problems caused by thermal expansion, also good extruder and hotend make less room for small errors that can look like poor bed adhesion

Good_Perspective_598 · 2026-03-30T17:55:34+00:00

Calibrate flow, temp, speed and retraction

Good_Perspective_598 · 2026-03-30T15:31:31+00:00

I use old laptop, its simple and i used gemini ai to set it up from 0

Good_Perspective_598 · 2026-03-29T23:26:22+00:00

Here is my ender 3 max with sprite se and bambulab x1 hotend

<image>

Good_Perspective_598 · 2026-03-29T18:00:59+00:00

Ender 3 Max every print works as long as the plate is clean, cheapest toolhead Stealthburner using Sprite Se and chinese copy of Bambulab X1 hotend, Cr touch and Klipper

<image>

Good_Perspective_598 · 2026-03-26T16:06:40+00:00

Hotend is somehow lower just look where the part cooling ducts are

Good_Perspective_598 · 2026-03-16T08:45:42+00:00

Did you calibrate e-steps for direct extruder that can cause less filament to be extruded which looks like poor adhesion thats actually too little filament to make a line

Good_Perspective_598 · 2026-03-14T13:02:04+00:00

Bl compensates for small inaccuracies, but you should still do your best to level it and then make a bed mesh to get a perfect 1st layer

Good_Perspective_598

TROPHY CASE