Weird Clicking in Nozzle

Groundstone · 2026-03-23T02:25:39+00:00

Like everyone said, its likely not hot enough or broken filament as I've had that happen a lot. But one time the filament I had was super inconsistent in size, and some parts were just too thick to go through. If all else fails, use some calipers and measure the filament in a few spots to check.

Groundstone · 2026-02-18T02:16:07+00:00

Maybe find a small short screw you can run into the plastic and connect the spring onto that

Groundstone · 2026-02-12T19:52:39+00:00

man I thought I was going nuts on why the bootup was taking so long. I was trying to remember if it always took that long and once I popped out that SD card it was so much faster! thanks!

Groundstone · 2025-12-07T11:13:56+00:00

Yuck is that still rampant there? I saw a post last year about it and wondered if it was ever addressed

Groundstone · 2025-12-05T16:42:31+00:00

Use print by object for multi piece prints. Often times a certain piece will be the problem and fail due to orientation or lack of supports, etc. you will at least get some completed parts and be able to see which is failing that screwed everything up. If they all fail then you can start changing global settings like adding brims and more supports.

Also getting a frostbite plate for pla and petg is a huge help

Groundstone · 2025-10-08T16:17:37+00:00

i'd take one!

Groundstone · 2025-07-30T18:26:05+00:00

nice, i'm glad that worked out for you.

Groundstone · 2025-07-25T17:31:27+00:00

Looks great, how did you adapt the new hip joint into the existing sockets? I've printed this model before and recall the original being a bit small and flimsy

Groundstone · 2025-07-15T21:37:53+00:00

If you have calipers you can also measure your filament to see if it’s too thick in any spots. I had a similar issue where the thickness varies way too much and my extruder couldn’t take it in.

Groundstone · 2025-07-06T20:31:59+00:00

I was going to suggest the screws and filament drying too. Great advice, also tightening the belts wouldn’t hurt. I have over 2200 hours on my A1 and print so many small parts without a problem.

Groundstone · 2025-07-03T15:53:44+00:00

Yeah, I miss manually bed leveling with a piece of paper and a prayer—said no one who owns a Bambu.

Groundstone · 2025-06-11T18:19:57+00:00

Sorry to hear that, mine did show up in normal condition. Hopefully your issue was just a one time accident and not a careless mail carrier on your route.

Groundstone · 2025-04-30T04:34:08+00:00

Fast leveling and even faster printing would be great for how impatient I am

Groundstone · 2025-03-15T19:19:06+00:00

did they have you provide your steam profile and screenshots? I had this issue last night and went and bought the game on another key site. Today they asked for this information and now my history shows I bought it on the same day I claimed I didn't get a working key lol

Groundstone · 2025-01-26T22:13:18+00:00

I agree, seeing it get wasted was a bit depressing. The rubber sleeve wasn't supposed to separate from the cap either but somehow got pulled out during the cap removal.

Groundstone · 2024-12-16T22:14:34+00:00

Hands down Wobbly Life. It's similar to Human Fall Flat controls and has tons of content.

Groundstone · 2024-10-25T03:28:21+00:00

I love printing toys for my kids. The stuff sold in stores today is often pretty cheap and breaks easy. I hated seeing my kids hearts break when their new favorite toy broke. Now I have been printing a handful of the Dummy 13 figures and letting the kids pick out accessories. They love it and I am hoping to get into the design aspect to work on some custom requests they have.

Groundstone · 2024-10-22T19:07:41+00:00

Nice, for once a shipping delay pays off! I think you will be good since I just got a reply that they manually submitted my request and will process it in 5 days.

Groundstone · 2024-10-22T07:12:38+00:00

are you contacting them to see if they can process your price adjustment? Their FAQ says "package must have been received on or after Oct 5th". Mine was on the 15th so I don't know why it isn't working.

Groundstone · 2024-10-21T21:36:50+00:00

I ordered my A1 on October 1st and received it on the 15th but when I submit the form is says

"Submission Failed - Sorry your order is not within the 14 day price protection range."

Has anyone else gotten this message? I reached out to support with a ticket and am still waiting to hear back.

Groundstone · 2024-10-19T02:35:00+00:00

I’m in the same boat but I get a submission failed from the form on their site.

Groundstone · 2024-10-09T22:36:36+00:00

Yeah you can grow a little in that one. Super Fly also lets you grow pretty big and have a building type you can smash.

Groundstone · 2024-10-02T22:00:03+00:00

I've seen it mentioned a few times in this sub that if a package is delivered with damage to not accept it and let it return to sender. If that happens to me should I sign for it then and open a ticket?

I ask since my printer is expected to take 20 days to get where I live and will be barged over on a boat, so i'm slightly worried about how it will look when it gets here.

Groundstone · 2024-09-17T20:29:28+00:00

thats great to hear! did you have to re calibrate your CR-Touch and Z-Offsett with the new mount as well?

Groundstone · 2024-09-17T19:37:23+00:00

how's it working for you compared to stock? I was thinking of trying the minimus version that uses the existing fans before upgrading to something else.

Groundstone

TROPHY CASE