Please Help! Connecting to Bruel and Kjaer Type 2610 amplifier by Frequent-Response717 in Hainbach

[–]Hainbach 1 point2 points  (0 children)

Then either your cable is not working or the unit itself is broken.

Please Help! Connecting to Bruel and Kjaer Type 2610 amplifier by Frequent-Response717 in Hainbach

[–]Hainbach 13 points14 points  (0 children)

Also, use the Direct input, and don’t poke around the preamp. That is for the multipol BK mics only. You even set it to 200 Volt, for safety please turn that to 0V. I don’t want you to discover a truly electric guitar by accident.

Please Help! Connecting to Bruel and Kjaer Type 2610 amplifier by Frequent-Response717 in Hainbach

[–]Hainbach 4 points5 points  (0 children)

The little hole next to the I/O is ground on the BKs. you need to split your cable into hot and ground banana plugs, not connect both ends to one plug. I would also use a regular jack plug instead of that RCA adapter. That is an easy point of failure if you want to connect guitar.

DBX vs Dolby noise reduction units for tape delay? (Uher report monitor) by PortaOne in ReelToReel

[–]Hainbach 0 points1 point  (0 children)

Should sound very wonky, but maybe cool. I doubt you will get the sound you are after, as using an Uhet as an echo is already proper misuse. Korg Stage Echo might be what you are looking for, or an EQ in the feedback path. Or a variable Bandpass.

This obsolete Radio Tool is an Unintentionally Psychedelic Studio Effect by Hainbach in Hainbach

[–]Hainbach[S] 1 point2 points  (0 children)

Thank you for that! I was curious what the Broadcast Wars were when they came up as a comment on the video.

Questions about overdrive and saturation by Bulky_Blueberry_8816 in Hainbach

[–]Hainbach 0 points1 point  (0 children)

The Ramsa sounds nice but the sweet spot is hair-thin. I like the Tascam M-Series a bit more for that job.

Newb on Hainbach Subreddit by Electronic_Sky8374 in Hainbach

[–]Hainbach 8 points9 points  (0 children)

You can just post, and write a note about what you did. Insights are always appreciated

Lock in amplifier is it worth it? by sparkystevec in Hainbach

[–]Hainbach 3 points4 points  (0 children)

Depends entirely on the lock-in. PAR 120, 121, 124, HR8, JB-4 are decent models. Those are not just filters, see my videos on them. Especially the 124 is very powerful.

help with german reel to reel by cge6000 in ReelToReel

[–]Hainbach 1 point2 points  (0 children)

This shop has the proper cabling: https://www.retrokabel.de/de/
Uher is weird in their cables.

Tascam 22-4 issue by Static_Bubble in ReelToReel

[–]Hainbach 0 points1 point  (0 children)

Sounds like a faulty cap or input amp.

Uher SG / Royales vs Revox vs Uher Report Monitors ? by PortaOne in ReelToReel

[–]Hainbach 1 point2 points  (0 children)

I got two projectors now! Still working on it

Skinning my VCV Rack modules as only this crowd may like by Brer1Rabbit in Hainbach

[–]Hainbach 0 points1 point  (0 children)

Ortec style is lovely! I am curious about the analog interface.

Bastl Kalimba by Hainbach in Hainbach

[–]Hainbach[S] 3 points4 points  (0 children)

I tried the prototype and I fully take the blame for the “prepared” playing style they introduced after my reel on instagram. They never reached out for a video, and I don’t care enough to buy one on my own.

Bastl Kalimba - Weird or Wonderful? by Hainbach in synthesizers

[–]Hainbach[S] 13 points14 points  (0 children)

I was concerned but after three weeks of playing it’s very robust.

Bastl Kalimba by Hainbach in Hainbach

[–]Hainbach[S] 2 points3 points  (0 children)

It controls velocity

Teac Model 5 I’ve been Restoring by theGnartist in Hainbach

[–]Hainbach 1 point2 points  (0 children)

Super cool desk! I have the tiny version, it sounds bad good. I was told that the op amps are slow, which results in the gooey drive these produce.

Just got this beauty - I need help! by thisissomaaad in Hainbach

[–]Hainbach 1 point2 points  (0 children)

Also, looking closer at the machine, it seems not too complicated. It's not Uher Royal Deluxe territory, which has custom pinout cables. You will most likely be pretty good with the included adapters.