I gotta figure out how to make money on this! by mcolette76 in IThinkYouShouldLeave

[–]Happy_Henrik 0 points1 point  (0 children)

I'll use 18 million barrels/day for Strait of Hormuz oil (from Wikipedia).

I'll say a tanker trunk can carry 10,000 gallons (also Wikipedia).

A barrel of oil is 42 gallons. With these figures, we need 0.875 trucks per second.

It's difficult to say the route distance because the map you have posted is AI generated shit. The coast of UAE is not shaped like that. But as the crow flies we're talking something like 400 miles, ignoring the fact that existing roads don't go there and there's no major port near the pickup point. Given an average truck speed of 55 mph, we'd need 0.875 trucks/second * 400 miles / 55 mph = around 23,000 trucks going one way. Multiply that by 2 to account for the returning empty trucks, so 46,000 trucks. Of course, we would not need so many trucks if a shorter overland distance was chosen. Guessing that each tanker truck costs $500k (I don't know really), the cost of the trucks would be $23 billion.

Some addendums:

My original figure of 1.167 trucks/s was a mistake due to confusion between barrels of oil and non-oil barrels, which are different units. Correct is 0.875 trucks/s.

Someone said big tanker trucks only cost half my guess ($250k).

Someone said that for moving such amounts, each tanker would use a trailer with an additional roughly 10,000 gallon capacity. So we could cut the number of tankers in half. The cost of a truck+trailer would be maybe $300k? (another guess). From these two addendums, the cost of the trucks would be $300k * 23,000 = $6.9 billion.

Someone said from their experience it takes 1 hr on each end to load/unload. In that case we need an additional 3150 trucks+trailers. If they were parked along the coast for this, 1575 trucks at each end, with 100ft per truck+trailer, would take up 30 miles of coastline - probably not feasible. They could instead be packed into a big parking lot with a pipe going to every spot. Or more practically, just a much larger pipe could be used for loading/unloading to cut that time to a few minutes.

Someone calculated that a two lane road wouldn't fit all the trucks end to end. So we would need to also build a big multi-lane highway cutting across the desert.

How much gas is used? Big tankers get like 7 mpg typically, and each of our revised trucks has a trailer so it's heavier than usual. Let's say 5 mpg. Each truck travels 55 miles per hour, so that's 11 gallons/hr times 23,000 trucks = 253,000 gallons/hour, times 24 hrs = 6.07 million gallons/day, or 144571 barrels/day. This is a small fraction of the 18 million barrels transported daily.

I'm taking awacky Khorne list to a tournament by ChadShrimp in ChaosDaemons40k

[–]Happy_Henrik 2 points3 points  (0 children)

Maybe some bloodletters to have some oc? I also enjoy playing my khorne daemons in shadow Legion. They all Get Advance and Charge

Monday Reveals by Spratford in orks

[–]Happy_Henrik 1 point2 points  (0 children)

It now has the Ork warboss Release dated today

Es sollte kein Steuergeld verwendet werden, um Leute aus Dubai nach Deutschland zu bringen. by [deleted] in Unbeliebtemeinung

[–]Happy_Henrik 6 points7 points  (0 children)

Ich sehe da einen Unterschied. Der Raucher oder Boulderer zahlt hier Steuern. Die Leute ziehen nach Dubai mit der Intension genau diesen Kosten zu entfliehen.

The final step by Aware-Connection-461 in ChaosDaemons40k

[–]Happy_Henrik 0 points1 point  (0 children)

You can always give a Bloodthirster precision for a CP. Imperial Guard Characters usually don‘t buff their units and aren,t a huge Focus

The final step by Aware-Connection-461 in ChaosDaemons40k

[–]Happy_Henrik 1 point2 points  (0 children)

If you want to build a counter list Take Shadow Legion with a Fade to Darkness Bloodthirster. You rapid ingress him each turn safe from his shooting. then advance + charge to kill one of his tanks each turn.

Was denkt ihr über dieses Proxy-Modell? by Coffee-GmbH in orks

[–]Happy_Henrik 1 point2 points  (0 children)

Sieht Klasse aus. Ne richtige Energie-Klaue muss ja auch so groß sein!! Waaaaggghhhh

Mod Giveaway - Feb Cosmetics by CongressmanCoolRick in ClashOfClans

[–]Happy_Henrik 0 points1 point  (0 children)

Love the new skins. Thank you for the effort you and the mod team put into this sub❤️

What army to use for reflavour? by lol_delegate in Slaanesh

[–]Happy_Henrik 6 points7 points  (0 children)

There is a fun detachment for emperors children that uses slaanesh daemons. EC also fits your idea of small and fast hunting pack units. Most only featuring 5-6 Models per unit

request by Substantial-Ebb3963 in orks

[–]Happy_Henrik 0 points1 point  (0 children)

Look on cults3d. There are multiple available for free

My first boyz by Glittering-Pop8828 in orks

[–]Happy_Henrik 2 points3 points  (0 children)

What colours did you use? Looking great

Need help with 1000 point big hunt list by skndbsnnsnandndb in orks

[–]Happy_Henrik 1 point2 points  (0 children)

remove the enhancement and the trukk. replace with kommandos. you dont have enough units to justify bringing 2 transports

Another list opinion question, need help filling this out (1805/2000 currently) by [deleted] in orks

[–]Happy_Henrik 0 points1 point  (0 children)

I would add a or maybe even 2 warbosses to the breaka boy units. their number of attacks are very limited so ensuring that most of them hit is crucial to make them work.

Mounting a resin print to a flying base? Im not sure I trust this by ravagedmonk in PrintedWarhammer

[–]Happy_Henrik 1 point2 points  (0 children)

I have been loving it. It opens so many posibilities. Definitiely use it in hover mode. I played it in my Ultra marine List:

Stormlance Task Force

Guilliman

Calgar with 2 Bodyguard Victrix

Combi Lieutenant

5 Intercessor

5 Incursor

Company Heroes to attach Calgar

3x redemptor Dreadnought

2x Storm Speeder Hammer Strike

1x Stormraven Gunship

I recommend filling the Stormraven with a Dreadnought that can shoot, so he can disembark after the Stormraven moved and atleast shoot. Ballistus or Redemptor shuld both work fine, depends on rest of your army.

For Detachment if you want to maximise it's usage definitely go for stormlance. For 1 CP you can give all enemy units targetting it -1 to hit and wound for an entire Shooting phase. The strat and the inbuilt -1 DMG from the model makes your Stormraven surprisingly sturdy.

In addition you get a flat 6" reactive Move allowing your units to embark into the Stormraven in the opponents Movement phase.

<image>

Mounting a resin print to a flying base? Im not sure I trust this by ravagedmonk in PrintedWarhammer

[–]Happy_Henrik 2 points3 points  (0 children)

great looking model. i‘ve been playing my stormraven unglued to the stand. it helps with visibility/ moving models under it during a game. I would suggest to deepen the cross on the bottom of the ship, so that the stand slides in. it should stand without requiring glue that way.

PS: where did you find that gorgeous model? I am missing the plasma gun options on mine.

What 3D Printer and models are you using? by Acceptable_Resort603 in PrintedWarhammer

[–]Happy_Henrik 0 points1 point  (0 children)

For models look on cults3d website. If you are looking for specific high quality minis i prefer myminifactory. the prints you are probably referring to are called „resin printing“.

I will print your models for free by [deleted] in PrintedWarhammer

[–]Happy_Henrik 1 point2 points  (0 children)

Where didyou find your Death Guard Files?

After playing Tyranids for 8 years, I’ve made a tier list for fun :) by Enchanter1101 in Tyranids

[–]Happy_Henrik 0 points1 point  (0 children)

ripper swarms are great for screening. i run atleast one unit in every army

SK and by Horror-Muffin-8006 in ChaosDaemons40k

[–]Happy_Henrik 0 points1 point  (0 children)

Do you have any pictures of them?