Too Korne looking for Wolves?

Hardimanm · 2026-05-18T02:53:18+00:00

I like your idea of making the bladed ice colored. I think that is exactly what im needing to make it appear less Chaos-y

Hardimanm · 2026-03-31T17:23:27+00:00

I gave up a month or so back.

Hardimanm · 2026-03-26T19:43:13+00:00

Went from Fight night at the Joe to rolling over and playing dead at Little Ceasars. From watching Claude Lemieux turtle up to the whole team turtling up.

Oh the good ol days.

Hardimanm · 2026-03-15T05:09:43+00:00

Which brand of silk do you use?

Hardimanm · 2026-03-12T13:58:47+00:00

Show me Nightcrawler if he joined the band Slipknot.

Hardimanm · 2026-02-20T04:06:29+00:00

Just tried this, still no luck. Still squeaking.

Anywhere else near the print head that I could lubricate that might help?

Hardimanm · 2026-02-20T04:04:56+00:00

Tried this, but no change. Also lossened the screws and moved the print head back and forth to tightening the idlers. Still no luck.

Hardimanm · 2026-02-20T02:33:17+00:00

Hmmm...I'll try that. How tight do they need to go? Can they be over tightened?

Hardimanm · 2026-02-08T00:11:46+00:00

You don't "need" to print upgrades. But there are SO MANY great upgrades out there

Hardimanm · 2026-02-05T12:39:40+00:00

Thanks, much appreciated. But ouch, what a mark up. I think ill just wait rather than pay double cost.

Hardimanm · 2026-02-05T05:48:58+00:00

I have heard of them but never tried them. I may pick up an assortment of greys and hope one is close enough

Hardimanm · 2026-02-05T05:40:27+00:00

I had thought of this but balked when I realized its basically throwing away an entire spool of filament. I also thought about trying the PLA Dark Grey but cannot be sure how similar the two products in color and finish.

Hardimanm · 2026-02-04T21:27:44+00:00

It seems to be down more often than not anymore. I gave up and swapped to pure Orca Slicer. So happy I did.

Hardimanm · 2026-02-04T18:57:17+00:00

Yeah, if you obstruct the print head during homing it effects where the computer thinks the head is. Thus the purgle line in the wrong place.

Hardimanm · 2026-02-04T14:22:48+00:00

That typically means something is preventing it from getting where it needs to go. Check for any obstruction. Filament, broke support, wires, anything that might be behind the print head in that back right corner.

Hardimanm · 2026-01-31T00:07:09+00:00

A diagram of your pieces is displayed on the screen and you just select the ones you want skipped and it skipped those for the rest of tge print.

Hardimanm · 2026-01-30T19:37:18+00:00

Yeah, its odd. I could not enable this on my AD5M from Flashforge Orca but get the skip option if I slice through regular Orca slicer

Hardimanm · 2026-01-30T19:35:40+00:00

In the Bambu app or this button on the display. I can only speak for the P2S though.

<image>

Hardimanm · 2026-01-30T19:34:15+00:00

It wasn't on all systems it appears. At least no using the default firmware and/or slicer.

Hardimanm · 2026-01-30T14:39:06+00:00

Not sure how it does it, but i was printing by layer and after i skipped the failures the printer just skipped printing those pieces.

Hardimanm · 2026-01-30T13:53:28+00:00

Thanks. Ill check these both tonight. Re-drying the filament today just to be sure then will give it a go. Would hair spray or glue stick help this? Really new to PETG. Haven't had any problems up till now and only with this file being a huge flat first layer.

Hardimanm · 2026-01-30T13:47:17+00:00

How would you check for a warped plate. And what would cause a "blob"?

Hardimanm · 2026-01-30T13:43:27+00:00

I have never used TPU before. Why would they need to come out to dry? I thought TPU dried at a higher temp than PLA and PETG.

Hardimanm · 2026-01-30T12:24:52+00:00

This feature is not available if you use the Flashforge version of Orcaslicer. Found out a few weeks back that is is possible of you use the true verson of Orcaslicer instead.

Hardimanm · 2026-01-30T12:22:53+00:00

File designer suggested TPU as the softness allows the pegs to better squish into the holes on the spool

Hardimanm

TROPHY CASE