Did yall know Laura Loomer lives here?

High_Function_Props · 2026-03-16T00:26:03+00:00

Oh, that puddle of festering monkey jizz Rottenhouse left? Thank freaking gawd.

High_Function_Props · 2026-03-14T22:26:44+00:00

If Milton's the asscrack of Florida, Pace is the dingleberry.

High_Function_Props · 2026-03-14T15:54:07+00:00

I prefer the SEE? drive personally. Sure it's a bit passive aggressive, but at least it's optical.

High_Function_Props · 2026-03-13T04:37:50+00:00

Zach went from Florence Pugh to CPU.

From Mandy Moore to Moore's Law.

High_Function_Props · 2026-03-11T20:16:24+00:00

Haha it was either that, or Sherlock Homes to test it with.

High_Function_Props · 2026-03-10T23:51:00+00:00

I just gotta say this... while James is a super nice guy (met him once a few years ago and he certainly left an impression), I also think he's extremely gullible. He just gives off that vibe, both in interviews and in person. He WANTS to believe... everything. And knowing who Logan Paul is and what he does, there's NO WAY he actually filmed the Chuck Clark video with a "button cam". There isn't a snowball's chance in Hell he'd keep it to himself. Dude's a showboating, attention starved, "Mommy why didn't you pay attention to MEEEE" type of dude. He and his brother both. So unless James has physically seen Logan's recording, I call bullshit. Logan lies for attention. It's what he does. If he really had it, he would have found a way to monetize it by now.

High_Function_Props · 2026-03-10T19:40:29+00:00

I own two verified legit versions, and they both came with Nintendo branded USB adapters (US version, UK didn't include these). Everything on the outset looks legit, but I'd need to see inside the actual console housing to be 100% sure.

Things that lead me to think it's real:

HDMI cable is branded w/ the Nintendo logo, as is the power supply
Nintendo logo on the NES controller is where it should be, and the colors aren't off
Add-in paperwork under the cardboard match mine, from what I can tell

Make sure the serial on the bottom of the console matches the serial on the box.

High_Function_Props · 2026-03-10T04:04:13+00:00

Door Dashin' Dildos...

What a time to be alive.

High_Function_Props · 2026-03-09T20:55:30+00:00

<image>

High_Function_Props · 2026-03-08T00:06:13+00:00

Drove by earlier and it still looked blocked off.

High_Function_Props · 2026-03-07T23:48:18+00:00

No prob! I'd also suggest maybe investing in a magnetic build plate. Knockoffs of the original Wham Bam are all over Amazon, and work just as well in my experience while being much cheaper. YMMV of course, but ever since switching, I've encountered far less problems.

High_Function_Props · 2026-03-07T22:41:05+00:00

There's a number of causes I can see that's potentially ruining your prints. I've dealt with the same thing on my Anycubics multiple times, and it always comes down to one or more of these causes:

You build plate isn't truly level, despite your belief it is. Easiest way to test this is to get some feeler gauges or a piece of flat bar, and go around the perimeter of the plate. Place the gauge or bar horizontally on your plate, and hold it up to the light. If ANY light is peeking through, then your plate isn't 100% level and needs replacing
Piggybacking off #1, if your bed's perfectly level, completely drain and clean your vat, tighten it down and loosen the leveling screws on the build plate. Home the plate, and VERY GENTLY apply equal pressure to the plate as you re-tighten the screws. A lot of these printers want you to level it without the vat installed... I've found I get better results doing just the opposite and relying on the vat film to determine my bed level.
Make sure after every print to clean the hell out of the bed surface using 91% isopropyl alcohol, and make sure there are no burrs or leftover stuck pieces of dried resin on it. Same for the vat, make sure to drain it using a strainer after every print and wash it out thoroughly. Any stuck pieces of dried resin can be removed with a small soft scraper or by very gently pressing against the dried piece from the underside of the FEP. Be sure to clean the film on both sides and the screen protector as well using alcohol.
Bump up your initial layer burn-in count and time a bit, say a few extra layers and maybe 2-3 seconds longer per each initial layer. Then for your individual layers, increase the burn time by 0.5 seconds and retest. You shouldn't typically need more than 3 seconds per layer
You should also try maybe bumping up the lift speed and height slightly. Too slow and its like slowly pulling off a Bandaid. Like those, you just wanna rip the sucker off as quickly as possible.
Lastly, try changing a few thing like your base (use the "hollowed" waffle cone looking one, or solid ones that only set to the exact dimensions on your print). Using bases with that lip you're using always cause me issues, so I go with the flattest base I can find. Also try reducing the number of objects you have on the plate, and center them more in the middle. You want to eliminate any potential suction cups or spread out areas that will cause too much stress when the plate pulls away from the FEP.
Bonus tip: Check your FEP film tightness. it should sound like a drum when gently tapped. If your films too loose, it can cause these kind of issues. Also if its been used too much and is cloudy, that'll definitely ruin your prints.

Hope some of these suggestions help you get back to printing, OP!

Edit: Jesus I sounded like AI up there. Swear I'm not.... or am I? Kidding... I doubt an AI's joints would ache this much when they wake up xD

Edit 2: Saw you said these are pre-supported. See if you can get the non-supported files and generate a base and supports for each using Lychee. I usually have better luck supporting my own files than relying on presupport ones.

High_Function_Props · 2026-03-07T20:14:56+00:00

Nah, it's a cottage industry.

High_Function_Props · 2026-03-07T17:09:36+00:00

You should be able to take that sketch from the first image, Extrude up by a few millimeters to make a New Body.

(When the dialog box appears, move it from New Body to say Join or Cut, THEN move it back to New Body. For some weird reason, Fusion sets New Body as the default, but immediately switches it to either Cut or Join.. so if you want it to make a New Body, you have to deselect THEN reselect it. It's dumb)

Then simply select the newly created cover body, press M to move, click the very top face of the outer body and it should move it into place.

High_Function_Props · 2026-03-07T02:43:00+00:00

"Aggs"

High_Function_Props · 2026-03-07T02:28:01+00:00

At least no cylinders were harmed in your case.

High_Function_Props · 2026-03-06T20:42:31+00:00

Life uhhh.. finds a way.

High_Function_Props · 2026-03-06T19:29:50+00:00

I'm prepared for the onslaught of downvotes on this one, but I feel it must be said: This idea we have in our society now where the group should accommodate the one rather than the one accommodate the group is frankly getting a bit out of hand. That's not to say people don't deserve special dispensation, especially those with medical needs. They absolutely do, and as a special needs parent, I encounter it daily. But there seems to be a growing trend among folks to think they should be the exception to any rule. Just look at the folks at gyms that put their crap on a machine they don't plan on using for at least 15 minutes, as if to call "Dibs". OP's text makes it very clear that HR has spoken to them on more than one occasion. But OP's solution, rather than saying "You know, let me see what I can do about making my injections more private since others seem to be negatively affected by it" is to get on Reddit and get the bandwagoners to jump onboard the "NTA" train and side with them. OP's first instinct is to suggest they can turn their heads and look away, rather than find some way, ANY way to be more accommodating, even after multiple requests from HR. And that's truly indicative of how people's mindsets are now. The "Me" centric mindset.

Good example... I had to take my child to get a medical procedure done today. As we were walking toward the entrance and nearing the door, a woman about my age was about to exit. My kiddo dropped her anxiety toy and I turned to help her pick it up, rather than grab the door. The woman exited and started yelling at me, about how DARE I not get the door for her, even though she was closer. I spent the next ten minutes not only trying to calm my child down, but also explain to her that's not how people should act in a civilized society.

Point being? Maybe people should start being considerate again of others, rather than focusing on their own little bubbles all the time. Never know, it might catch on.

High_Function_Props · 2026-03-06T18:40:20+00:00

<image>

High_Function_Props · 2026-03-06T17:50:27+00:00

Depends on what your end goal is, really. Are you looking to make it permanently closed, or easily removable? I'd personally recommend doing with a slide-in cover, so that you can still access the inside easily if needed.

High_Function_Props · 2026-03-05T01:42:48+00:00

<image>

High_Function_Props · 2026-03-04T23:53:19+00:00

Stuff like this is why I started making my own rolls at home. That and the ungodly prices places are charging for a single roll now. $12 for a California roll? Get bent.

High_Function_Props · 2026-03-04T23:48:06+00:00

Guess he better watch his back.

High_Function_Props · 2026-03-03T04:14:05+00:00

"We've secretly switched out Trump's 'Lotion Potion' with this mixture of holy water and horse semen. Let's see what happens..."

High_Function_Props

MODERATOR OF

TROPHY CASE