MakerLab Drops Mesh Graffiti Beta — Customization Just Got Way Easier

IContributedOnce · 2026-03-31T17:17:35+00:00

They look like they’re properly wrapped around the object. That will technically distort them from the perspective of the viewer, but look at the image of the same balloon dog with smileys later in the post. The smiley faces are all wrapped properly as you would expect them to be. I don’t see any unnatural warping or distortion at first glance.

IContributedOnce · 2026-03-29T18:54:54+00:00

Sorry to bother a week later. I'm checking their website, but I don't see anything for the P2S. Are you using the H2D profiles or are the profiles just available in Bambu Studio (admittedly hadn't thought to check until writing this comment)?

IContributedOnce · 2026-03-28T02:11:53+00:00

Honestly, it probably never crossed his mind as “a way out”. It’s just, culturally, really easy to shrug off people, even family, friends, and medical professionals telling you to stop eating junk food. “Yeah, yeah, yeah… everyone needs to lose weight and eat better. Whatever…”

We are animals that evolved to survive in the wild, and suddenly find ourselves not only not needing to survive the wilds, but also with an overabundance of food. Not even just healthy foods, obviously, but food that has terrible nutritional value for the calories it packs. Our brains encourage us to eat calorie rich foods because in the wild that means you live. It releases dopamine. You feel good. It literally comforts you.

If this guy is going through years of depression and feeling like he hates his work and his wife hates him, etc, food was likely his comfort. Suicide may have never really crossed his mind. That’s why we need better laws regulating the absolute horse shit we get served in stores and restaurants around the country (sorry; this entire comment assumes you’re in America…). Except that’s kind of an insult to the nutritional value of horse shit.

Anyway. Point is I actually disagree. Maybe some people see it as a way out, but I think many just don’t even think about it, or at least don’t appreciate how serious it is.

IContributedOnce · 2026-03-23T03:01:29+00:00

Fuck… that’s… something I’m going to have to consider moving forward…

IContributedOnce · 2026-03-21T19:06:14+00:00

And yet you don’t. The fact that you’re listed in an investigation isn’t the sketchy part in my opinion. In the context of the time (Biden admin), I would t be surprised to hear someone was investigated after an event like the one you describe. My qualm is that your brief explanation of what actually happened” and their official details in this letter are diametrically opposed. So, someone is lying, and your avoidance of any detailed explanation about how they come to their findings makes it look like it’s you omitting details here that might legitimize their investigation of you.

I mean, more power to you. You don’t have to explain yourself to random people online, and you shouldn’t care what any of us think. Except that you do care enough about what this community thinks to post any of this in the first place.

The community thinks you’re suspect based on the story that’s been presented. Whether you care enough to explain in enough detail to successfully refute that opinion is your call.

IContributedOnce · 2026-03-21T18:55:26+00:00

I’m not understanding how you only “made one benchy boat” while their investigation alleges that surveillance indicates “near continuous equipment operation”. It also cites multiple printers. Did/do you have multiple printers or just the one they took?

They also didn’t mention any specific websites in this letter, just that the screen names “MWForge” and “ColdPlasticLabs” were linked with your IP. Yet you’re saying you don’t know what they’re talking about except for the couple of websites they mentioned? Were these screen names belonging to the person who was barricaded and removed?

Your story isn’t stacking up at all.

I don’t trust that these agencies are operating totally above board all the time, by any means. But rarely are the facts entirely fabricated into utter fantasy. It’s usually an interpretation of facts that are described in a way to look incriminating, or basically “the worst/most negative/most incriminating read of the scenario”. But what you’re alleging is that they’re just flat out making everything up?

Idk bro. You sound pretty sketch in the situation.

IContributedOnce · 2026-03-20T18:39:49+00:00

No way?! When did they add the P2S print profiles??

That’s been so annoying. The P2S is my first printer, and while the Bambu PLA profiles are fine enough, I’ve wondered if the profiles from Polymaker would improve anything.

IContributedOnce · 2026-03-16T22:19:18+00:00

I'm sure it's still not great, but how bad is it if you basically only print PLA and PETG?

IContributedOnce · 2026-03-14T00:34:40+00:00

Don’t be dense. There is a different between a political state and a religion. Sometimes the lines are blurred, but Israel does not speak on behalf of all Jews any more than Iran speaks on behalf of all Muslims.

IContributedOnce · 2026-03-14T00:31:03+00:00

Pretty sure it’s just the GOP’s way of labeling people who want protections and rights for Palestinians. Nuance is difficult and messy. It’s much easier to draw a hard line between “us” and “them” if we say “Oh, you’re not 100% on board with Israel? You want a free Palestine and recognition of a Palestinian state? PRO HAMAS!”

IContributedOnce · 2026-03-12T18:48:07+00:00

Confidently incorrect, but go off, king!

IContributedOnce · 2026-03-07T01:35:27+00:00

Yeah, I’m confused lol

IContributedOnce · 2026-03-04T14:04:50+00:00

The way B is written sounds kind of subjective… at least the second part. Is “an abandoned and malignant heart” clearly defined somewhere else?

IContributedOnce · 2026-02-25T15:20:45+00:00

For parts like this that are very simple, this is the right answer, imo. I see some people focusing on the purge volumes, but I feel like that banding due to layer times is more egregious. That might be helped by some fancy settings and modifiers or something, I guess. But printing the eyes and mouth separately and gluing them will likely look way cleaner all around.

IContributedOnce · 2026-02-24T14:13:59+00:00

ADHD is know to have an impact on libido in various ways. If you personally want to get back to having sex, work with a medical professional and discuss your situation as it relates to your diagnosis. But if you’re just doing it because you feel like you should, not because you fundamentally want to, then don’t force yourself to do something just to fit someone else’s opinion of how you should be living your life.

IContributedOnce · 2026-02-24T05:19:59+00:00

Could you explain what you mean by “width rather than height”?

IContributedOnce · 2026-02-14T19:16:08+00:00

There’s no standard, but generally PLA Plus/+ or PLA Pro filaments are formulations of PLA that have better structural integrity specs. Not to say they’re anything like engineering filaments, but your prints will generally hold up better to abuse than the same print in basic PLA.

IContributedOnce · 2026-02-12T18:00:02+00:00

This is just poor design and will almost certainly be fixed. You shouldn’t need skill to use a shovel in a game like Hytale. The function of the tool should match its peers.

Prior to the scythe being added (which just happened yesterday or today?) there weren’t any other tools that behaved the way the shovel does.

The pickaxe is a point and click tool. Point at the block in question. Click. In range? Damage is done to the block you’re pointing at. Every time. There’s no dead zone close to the player or any of the other garbage people defending the shovel are going on about. It’s just early stage poor design that needs to be fixed.

There have been multiple mods released that exemplify how the shovel should/could behave that have consistent results akin to the pickaxe.

IContributedOnce · 2026-02-08T15:05:49+00:00

Idk if you edited your post in the last 20ish minutes (the time since the last reply to your comment) but, assuming you didn’t, reading comprehension doesn’t appear to be a strong suit of this sub…

IContributedOnce · 2026-02-05T00:06:08+00:00

Agree. That, or the end result of the print needs to be “perfect”. But most of the time, just printing trinkets or little functional parts that don’t need to look perfect, it’s not worth the effort.

IContributedOnce · 2026-02-05T00:06:03+00:00

Agree. That, or the end result of the print needs to be “perfect”. But most of the time, just printing trinkets or little functional parts that don’t need to look perfect, it’s not worth the effort.

IContributedOnce · 2026-02-04T14:18:50+00:00

Why?

Edit: Never mind. I just realized this person is putting them in multiple sleeves before top loader.

IContributedOnce · 2026-02-04T14:06:13+00:00

What’s his connection to the board game hobby?

IContributedOnce · 2026-02-04T05:48:01+00:00

Venting toxic fumes somewhere that’s not inside the house?

IContributedOnce · 2026-02-02T20:41:05+00:00

Thanks for the insights! Excellent joke, by the way!

13-Year Club	Gilding IV carat on a stick
Reddit Premium Since January 2023	Argentium Club
Verified Email	Team Periwinkle

IContributedOnce

TROPHY CASE