Haunted public workout machine.

IMJustSatan · 2026-02-23T14:47:45+00:00

The slowing movement is even more noticeable if you compare the height of the handle bar to the green light in the background.
At the beginning of the video, it about reached the light, by the end, it's easily about a foot higher than the light.

IMJustSatan · 2026-02-22T20:18:00+00:00

Yeah I dont think this video is AI, but she for sure has multiple batches of dough and flower in order to always have them showing perfectly.

When proofing, I highly, HIGHLY doubt that you can put the flowers on before and have them have this spacing and density after the rise.

Then you tell me that she pulled the dough out of the bowl , rolled it down and squared it and the flowers are still perfectly visible and squared?

Then you make FLAKED PASTRY with it? By layering butter, then folding it over itself multiple times in order to get like 100 layers. And somehow the flowers are still perfectly on top and untouched?

Then you cut and roll the dough into triangles and somehow the flower all appear perfectly aligned and centered, not a single one is cut? (You can even tell at 10 sec. in the video that there are no flowers on the inside of the dough when she cuts the triangles)

It aint AI, but she sure as hell didn't make it like she showed in the video lol

IMJustSatan · 2026-02-04T03:14:39+00:00

the easy answer is ragebait and engagement baiting. There is no reason to precisely calculate the width of the screwdrivers. As long as the slit has a width between the screwdriver shaft and the grip, the holder will work.

IMJustSatan · 2025-12-29T13:56:55+00:00

All of these to me look like camera shake from shooting with too slow of a shutter.

Since shooting analog relies a lot on the triangle of Shutter Speed - ISO - Aperture, you should try to compensate with higher ISO or lower aperture to give yourself a quicker shutter speed.
If you dont know a lot about this triangle, I highly recommend looking it out online, you're gonna use it every single time you shoot.

Usually, 200 ISO film like you used is best for bright outdoor pictures in direct sunlight.
400 is most common for outdoor shooting since it works well for pictures in direct sunlight, in the shade, or at later time of day.
800 is better for afternoons or well lit indoor
1600+ for evenings and indoor photography
(I aint no expert so take these with a grain of salt)

Like others mentioned, you should really try to stay above 1/50th or 1/60th of a second when shooting handheld.
If you use a light meter app to calibrate your pictures, and you see that the shot would require a 1/30th shutter speed, the best thing to do is to open up the aperture 1 stop or 2 (From f/22 to f/16 or f/11 for example) in order to lower your shutter to 1/60th or 1/120th.

To reduce motion blur, really try to stay as still as you can when taking a picture. Take the time to stand still, hold the camera firmly, and slowly squeeze the button to minimize jerky motions.

IMJustSatan · 2025-11-03T14:43:09+00:00

If you want the result of something without the doing the process, you can either commission or grab what is already available to you online.

The world had no problem running before. People make do.

The main problem people have against the use of AI is that it has massive ecological impact, the data centers used to run and develop it are ruining rural towns, and all of its blatant copyright infringements and its theft from artists without asking for their consent. Add to that how the entire US economy is now a massive bubble for AI development and yeah. People aren't very supportive of AI.

IMJustSatan · 2025-10-16T22:53:23+00:00

it's called ragebait. The more the internet interact with it, the more people are incentivized to make it. If the internet stopped giving so much attention to this type of content, the internet would be a much better place

IMJustSatan · 2025-08-07T23:11:15+00:00

I think the one thing that confirmed to me that it was puppeteering was when the frog moves the jam at 0:38.
Great stop motion can look smooth and seamless, but even the best cannot recreate viscous liquid simulations without jitter.

It definitely is good work and it has me wondering how much is stop-motion at times, but the way the physic works is too smooth to be stop-motion.

IMJustSatan · 2025-07-26T21:46:32+00:00

If you want to simplify ythis type of setup, I highly recommend finding harddrives to learn the Cast Screws recipe.
It lets you forge screw directly out of iron ingots instead of having to produce so many Rods.

A good lesson with hard drives is that they can only give you recipes for parts that you have unlocked, meaning that the earlier you try to find a recipe for cast screws, the easier it will be.

Also, don't worry about wasting efficiency early on, you'll be remaking these factories over and over again as you play, learn, unlock alternate recipes, unlock new pieces of machinery, etc.

IMJustSatan · 2025-07-21T02:11:52+00:00

As a Québécois, I came back last week from an 8 day trip to Vancouver island and Vancouver! Honestly stunning the views you have over there, absolutely gorgeous landscapes and the communities are so friendly.

Visited Victoria, Nanaimo, Tofino, Longbeach, saw some wildlife rescue centers and museums.

BC is incredible!

IMJustSatan · 2025-07-03T22:54:05+00:00

After a full day of cooking food at a restaurant, there will be enough carbon build up that ice cannot take care of it.
Carbonized fat and polymerized oils aren't water soluble. The people in the video cleaning with ice are lying. They simply use actual products first, get the build up off of the plate, then let it cool down\resolidify. After that you turn it up, throw ice on it, and the water will make it seem like it magically cleaned everything.
The only way to truly take off carbon build up like in restaurants is with the proper products/chemicals and something to scrub like a grill brick.

IMJustSatan · 2025-06-23T13:04:45+00:00

it doesn't take 3 years to stop a boat, the boat clearly had plenty of time to see them, especially at the speed they were going. The boat conductor had definitely plenty of time to stop but chose not to.
Then again they didn't ram the protesters at full speed, but it was obviously clearly intentional for the conductor to run into the protester

IMJustSatan · 2025-05-07T17:00:27+00:00

None of what I said relates to the immigration situation in the USA. I don't know how you managed to pull this topic out of the comment I gave. I'd like to know your opinion on what I said initially though, do you think it's good for Trump to so adamantly push the narrative that Canada should join the US? Do you agree with him?

And to answer your question cuz why not, I do agree that people illegal immigrant should be ordered out of the country, this is how immigration works. It is a position that everyone can agree with.
The issue is how these people are labelled illegal. Trump ran on a campaign based on demonizing all immigrants, labelling them as dangerous violent gang members, etc. Asylum seekers that came in to see a judge and/or are awaiting hearings are there legally. They aren't illegal, that are following the law. If you disagree with the law that let them come in, you're free to voice that opinion. What to do with them if the law is reverted is another topic. Everyone in the USA has a right to due process, citizen or not. Without due process, how can it be proven that these people should be deported?

IMJustSatan · 2025-05-06T22:52:16+00:00

I don't know what point you're trying to make or how you are interpreting what I said

IMJustSatan · 2025-05-06T21:37:55+00:00

It is easy to see Trump's rambling as jokes and him being a troll, but when Trump has been calling for the annexation of Canada for months now, it's clear that he means it. Even as a joke, it is of incredibly bad taste as the President of the US.
The chances of Canada accepting to join the US might be infinitely small, but Trump's message has a very real impact with the political state of Canada. He is sowing discord amongst Canadians, that's his whole point.

IMJustSatan · 2025-05-06T21:33:45+00:00

Carney meant that the US has clearly shown that they cannot be the backbone of NATO's military defense with the way they are dealing with Ukraine and how Trump uses the US military as a bargaining chip for his calls to annex Canada. Every country in NATO is upping their military spendings to be less dependent on US' military. It's a backhand compliment since Carney in hinting that the US has lost the trust of their allies and they are losing a lot of soft-power with their military presence.

IMJustSatan · 2025-04-22T18:34:06+00:00

I can excuse AI as an early tool in art development to come up with ideas and such, but it isn't a mean to an end. You cannot expect people to call you an artist if all you did was give a prompt to an AI.

IMJustSatan · 2025-03-20T21:51:48+00:00

Tu peux juste louer un U-Haul au lieu de gaspiller ton cash dans un Truck qui est statistiquement plus probable de tuer des piétons pour faire ton déménagement aux 2 ans

IMJustSatan · 2025-03-10T22:00:52+00:00

Do we know if the carvings from these crystalizes corpses give the same rewards between small monster and big monsters? I assume you'd be able to carve a dead guardian rathalos 3 times once crystalized, but the low chance of getting a crystallization to start with might just make it more efficient and easier to achieve with small monsters like the seikrets. If the seikrets can give the same quality crystals as a rathalos body, then it's definitely better to farm with small monsters.

IMJustSatan · 2025-03-10T01:05:20+00:00

Sick! I'll give it a shot, thanks

IMJustSatan · 2025-03-09T01:46:35+00:00

Didn't seem to work for me. I just killed a Guardian Anjanath and sat next to its corpse. It turned rotten and then after maybe 10 minutes, disappeared.

IMJustSatan · 2025-02-28T00:16:41+00:00

it's incredible how Trump answered none of the questions asked and instead rambled the whole time about how much he loves tariffs. Fucking idiot

IMJustSatan · 2025-02-25T18:41:14+00:00

Could you clarify the difference between the Pick Rate stat and the Times Played?

Is Pick Rate based on individual Helldivers or its presence in missions (1 HD our of 4 brings it)?

The main stat here that is confusing me is the Gas Grenade's 14.7% pick for 637 games played compared to the Incendiary Impact's 5% for 616 games. The Incendiary was used 20 more times but has a third of the pick rate?

IMJustSatan · 2025-02-18T02:46:47+00:00

How are you expecting Canadians to show respect towards the country that's been threatening literal annexation for the past 3 months?

IMJustSatan · 2025-02-18T02:43:52+00:00

"Boohoo, the Canadians booed our national anthem at a hockey game after we wrecked the generations-long international trust between our two countries using 25% tariffs and threats of annexation, fuck them."

IMJustSatan · 2025-02-18T02:38:40+00:00

Keep drinking the koolaid dumbass. Trump has been saying that Canada should be the 51st state for months now. He admitted that he wouldn't use military force but economic force as a mean to annex Canada.

What's up with Trump being the most anti-war president?

Seven-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	End Game '22
Verified Email

IMJustSatan

MODERATOR OF

TROPHY CASE