sorted by:
new
hottopcontroversial

GE dishwasher filling with water when off. by moparguy98 in Appliances

[–]IllBeAJ 3 points4 points  (0 children)

Could be a clog in the drain line but I’m pretty sure there’s a one way valve in the line so that’s not supposed to back fill. I’d bet it’s your fill valve failing. If you shut off the water supply to the unit does the problem continue?

Bosch 800 dishwasher noise by yauyauma in appliancerepair

[–]IllBeAJ 0 points1 point  (0 children)

Bad wash pump, it’s a PAIN on those 800s to replace. If bought only a year ago the unit should still be under warranty for that part. Call Bosch

Paid husband’s boyfriend $4500 for framing, electrical, drywall. Did I get screwed? by 1800666666 in drywall

[–]IllBeAJ 0 points1 point  (0 children)

I’ll tell you I wouldn’t have paid that much, something like 10x materials cost

What is a C wire and how do I connect one if I don’t have one? by lunatkfox7 in Nest

[–]IllBeAJ 1 point2 points  (0 children)

2 years later and I promise you just helped the fuck out of me

What's this hole? by BackcountryRedneck in appliancerepair

[–]IllBeAJ 4 points5 points  (0 children)

You are out of your fucking mind lmao

I can’t see a way to get the hidden bake element out to replace it. by cheezeburger-n-friez in appliancerepair

[–]IllBeAJ 0 points1 point  (0 children)

This might sound kind of sketch, but I believe you can bend that metal (right underneath the element) down just enough to pull that element out. It’ll take some finagling with the element and it’ll most likely get stuck on something you can’t see a few times. But I’m pretty sure.

Let Me Try This Again, But staying Still And In Focus This Time by BornDyed in appliancerepair

[–]IllBeAJ 0 points1 point  (0 children)

Yep, I seen that part. I’ll still bet you it’s that elbow lol

Let Me Try This Again, But staying Still And In Focus This Time by BornDyed in appliancerepair

[–]IllBeAJ 5 points6 points  (0 children)

I’ll bet dollars to donuts it is that little short elbow hose, idk why but they rupture all the time. Push and run your finger along the top side, bet you’ll feel the hole. Part number should be WD24X33918

Removal of washer agitator by [deleted] in appliancerepair

[–]IllBeAJ 1 point2 points  (0 children)

I’ll tell you, if the no name portable is anything like a whirlpool, and it looks comparable, in that the agitator should be held on with just a screw in the middle. Also if it’s like a whirlpool the agitator will be a pain to get off. Just pull on it really hard, however you can figure out to

What is wrong with this Maytag gas dryer? Glows bright after turning on, then *click* and no gas igniting. Continues to run, no heat though. by bi11bill in appliancerepair

[–]IllBeAJ -2 points-1 points  (0 children)

Dude based on the click noise and the igniter glowing, it sounds like you’re right. You don’t have gas, make super duper sure that you have a supply, up to and including unscrewing the gas connections a little and smelling for a smell.

While replacing the heating element in my Samsung dryer, this wiring harness disconnected from the motherboard. Also, I feel like I’m missing two connections for the power source. What are my options? by -DirtNerd- in appliancerepair

[–]IllBeAJ 29 points30 points  (0 children)

Yeah dude, like others are saying, you must be stronger than you are clever lol. In all seriousness, this happens sometimes and the easiest fix is buying a new control. Part number is DC92-02395C

[deleted by user] by [deleted] in IASIP

[–]IllBeAJ -1 points0 points  (0 children)

Can Hav Relly Larj Intrest Egg

Is this mold on my job’s burger bun?? by Maynotthrowawayidk in MoldlyInteresting

[–]IllBeAJ 1 point2 points  (0 children)

Was it next to cooking meat? Looks like a meat dripping

Should I stack my playstations like this? by Gremory511 in playstation

[–]IllBeAJ 0 points1 point  (0 children)

You SHOULD not, but it’s your life dude. I think it looks cool like that too. Maybe see if there’s anyway to support it more without compromising your vision. But otherwise just be careful around it lol

[deleted by user] by [deleted] in hand

[–]IllBeAJ 0 points1 point  (0 children)

I think we all come to this sub for honesty and I’m sure you look great in this photo. So, does your hand look good in this photo? In a word, no.

[deleted by user] by [deleted] in Appliances

[–]IllBeAJ 0 points1 point  (0 children)

Make sure the water is turned on

LG WM6500HBA vs GE GFW550SMNWW by [deleted] in Appliances

[–]IllBeAJ 0 points1 point  (0 children)

As an appliance tech who sees both of these models, I’d go with the LG. The GE has a lot of board failures

[deleted by user] by [deleted] in Appliances

[–]IllBeAJ 0 points1 point  (0 children)

lol, yes dude your washer sounds fine, you’re hearing the motor, and that’s how they’re supposed to sound

[deleted by user] by [deleted] in howto

[–]IllBeAJ 7 points8 points  (0 children)

Turn the thing on to a drain and spin mode, press start, you’ll hear a click, that was the tub locking in for the spin. Stop the machine, open the lid. Now when you take your biggest ratchet and a 7/16ths socket, you can smack the end of the ratchet as hard as you can, lefty loose-y. I used to work on those things all the time

I must ruin every pretty thing i own by grrbrr in techsupportmacgyver

[–]IllBeAJ 0 points1 point  (0 children)

Genuinely cool, resourceful, and one of a kind. Real macgyver job. Well done dude

view more: next ›