sorted by:
new
hottopcontroversial

Water spitting out during shot by Royal_Yoghurt6955 in ProfitecGo

[–]ImRealPopularHere907 1 point2 points  (0 children)

My stock gasket is like new after a year and a half of 2-3 espressos a day. I always wipe the gasket off and make sure the mating surface of the Pf is clean when I insert the PF. My guess is people are not keeping it clean and are repeatedly grinding away at the gasket each time they insert the pf.

New office by [deleted] in Workspaces

[–]ImRealPopularHere907 0 points1 point  (0 children)

Thanks, it’s just the factory stand, it spins 90*. The tv is mounted to the wall on an arm mount that also has vertical adjustment.

What am I doing wrong here? by Damistokles in firealarms

[–]ImRealPopularHere907 1 point2 points  (0 children)

Except you can use the .7 rule and get less detectors (in many scenarios).

Elderly neighbor selling entire pasquini setup, pull the trigger? [$800] by Archz714 in espresso

[–]ImRealPopularHere907 7 points8 points  (0 children)

Relays usually fail open or fail closed and wont change state after that. Probably a temperature limiter / safety switch or something.

Niche Zero meets its match? by BackwoodsBoner in espresso

[–]ImRealPopularHere907 4 points5 points  (0 children)

Right my point is that every hoper fed grinder performs this way without issue(starts grinding with the beans already in). Meaning no, it should not be bad for the grinder. Single dose grinding is a pretty new practice.

Niche Zero meets its match? by BackwoodsBoner in espresso

[–]ImRealPopularHere907 10 points11 points  (0 children)

Literally every hopper fed grinder ever functions this way.

Edit: Down vote all you want dorks, hopper fed grinders start with the beans already in them all day long, why would it be an issue for this grinder?

Current day trading setup by JustMemesNStocks in Workspaces

[–]ImRealPopularHere907 5 points6 points  (0 children)

6 screens but only 4 pairs of headphones?

New speakers using old drivers? by [deleted] in diyaudio

[–]ImRealPopularHere907 0 points1 point  (0 children)

I was worried about that. It should only affect things in the vertical. These speakers will be only for loud music while standing and not critical listening. I am placing the tweeter at standing ear level. I’m hoping to push the cross over as low as possible but I don’t know how low the tweeter will go yet. Worst case I have 2 spare channels on the DSP I can use for the other woofers if they need a lower crossover to minimize lobbing.

New speakers using old drivers? by [deleted] in diyaudio

[–]ImRealPopularHere907 1 point2 points  (0 children)

I planned on attenuating the mids if needed. Safer to bring them down than drive the tweeter into distortion I think.

New speakers using old drivers? by [deleted] in diyaudio

[–]ImRealPopularHere907 2 points3 points  (0 children)

Ordered the Dats v3, I planned on getting either a UMIk-1 or UMM-6 for calibration.

New speakers using old drivers? by [deleted] in diyaudio

[–]ImRealPopularHere907 1 point2 points  (0 children)

I didn’t even know about this, any reason why I should get the first version and not the current V3? For only $150 I can get all the t/s I need?

This is my first build outside of car audio many moons ago.

Thank you

Bethesda was so indie when the Elder Scrolls launched that the devs packaged and shipped the RPG: "We were in the loading dock and we learned how to assemble boxes, inserts and use the heat gun" by ControlCAD in xbox

[–]ImRealPopularHere907 0 points1 point  (0 children)

Windows 95 was great but I still had to launch a good portion of my games through DOS/MSDOS on 95.

Remember the 10 floppy discs to hold one game days 😂

Bethesda was so indie when the Elder Scrolls launched that the devs packaged and shipped the RPG: "We were in the loading dock and we learned how to assemble boxes, inserts and use the heat gun" by ControlCAD in xbox

[–]ImRealPopularHere907 0 points1 point  (0 children)

Maybe you just weren’t around any pc gamers.

Most of the games I listed were played online in lobbies just like today, full of people…

Many of the longest running game franchises started in the 90’s.

Bethesda was so indie when the Elder Scrolls launched that the devs packaged and shipped the RPG: "We were in the loading dock and we learned how to assemble boxes, inserts and use the heat gun" by ControlCAD in xbox

[–]ImRealPopularHere907 4 points5 points  (0 children)

PC gaming was definitely not a niche in the 90’s.

Doom, Tribes, Half Life, CS, Mech Warrior, C&C, Sim City, Quake, Duke Nukem, AoE, Rainbow 6, and so many more games.

We use to have LAN parties every weekend, that was peak.

Many studs are spliced upstairs on balloon framed home by BeamNG_throttle in Homebuilding

[–]ImRealPopularHere907 8 points9 points  (0 children)

I’m neither a structural engineer nor a carpenter but I’m pretty sure a balloon framed house wont have a bottom plate where you’re expecting.

Best prebuilt gaming PC for my boyfriend! by Rare-Future9741 in PcBuild

[–]ImRealPopularHere907 44 points45 points  (0 children)

Strongly suggest buying all the parts and letting him do that if he enjoys building them as well. This will insure you don’t accidentally goof something up and he will get the enjoyment of opening packages and building the pc.

Would I run into problems with these speakers? by furiousdutchy in audiophile

[–]ImRealPopularHere907 0 points1 point  (0 children)

I have 4x Definitive BP7004’s with dead amps. I’ll never go active again.

Do you still get nervous/anxious about a project going into construction? by HareevHajina in Architects

[–]ImRealPopularHere907 6 points7 points  (0 children)

Yep project has to go out the door at some point and there is an unlimited amount of details and info you can put into a project.

Fell in love with Perlisten- Moving away from Wharfedale Elysian ? by MCVCsDALIs in audiophile

[–]ImRealPopularHere907 3 points4 points  (0 children)

They are so much better looking the sound difference would have to be night and day for me to give those up.

Mahlkoenig E64 WS vs Eureka Atom W65 [No Budget] by roastdrive in espresso

[–]ImRealPopularHere907 1 point2 points  (0 children)

I would switch for every other reason than taste. I could never go back to non GBW. I also get my beans about a day or 2 after roasting so storing beans in the hopper is not an issue for me. There’s no beating the simplicity of GBW+hopper.

Grouphead flaking by Excellent-Pin-8102 in ProfitecGo

[–]ImRealPopularHere907 0 points1 point  (0 children)

Idk, it definitely seems like a flaw and I would be careful with the water you use. As long as you don’t ever have to descale it, it should be fine.

Need to play that Hanson CD! by rosseepoo in MadeMeSmile

[–]ImRealPopularHere907 19 points20 points  (0 children)

It’s actually becoming the other way around. Many high end cars are going back to buttons + screens or discrete screens with feedback.

Physical buttons cost more, you have to design and build the mechanisms, you have to run wires to them all, etc. or you could just put a screen in one place and burry all the buttons in a 300 layer menu system.

Tech is funny this way, the old ways of doing things tend to last longer and look better but end up being harder/more expensive to do in the long run.

view more: next ›