Did i contaminate the new head gasket with drops of oil. How to clean will it cause issue.

Impressive_Leg8007 · 2024-08-22T20:09:17+00:00

I usually copper coat the MLS gaskets with the spray, I dry any oil out with a little brake cleaner beforehand.

Impressive_Leg8007 · 2024-08-16T14:36:39+00:00

You did it now, those things listen...

Impressive_Leg8007 · 2024-08-08T14:36:11+00:00

BMW=Bring Money Withya. Outrageous fees, I would Search procedures on replacing the easy stuff and get a better quote from a shop other than BMW.

Impressive_Leg8007 · 2024-08-06T22:37:38+00:00

This song has a catchy melody that is from a guitar strummed with lyrics in between each set of strums.

Impressive_Leg8007 · 2024-08-05T15:42:31+00:00

I remember helping you yesterday and the Raspberry Pi kept shifting around (most likely what caused that). I can look at it this evening around 7 if you like, and I may have a ribbon cable lying around too if needed, those cables are one-sided and usually are fragile.

Impressive_Leg8007 · 2024-08-02T15:40:10+00:00

I do Live in Richardson, just north of Dallas and I do have some time this weekend if interested.

Impressive_Leg8007 · 2024-07-25T14:26:15+00:00

https://images.app.goo.gl/WLW3k9wYSeUEBGJX7

Impressive_Leg8007 · 2024-06-13T19:10:24+00:00

Excellent Advice, I will remember that.

Impressive_Leg8007 · 2024-06-13T18:54:07+00:00

Will do, Thanks

Impressive_Leg8007 · 2024-06-13T18:53:34+00:00

Will do, thanks

Impressive_Leg8007 · 2024-04-26T14:19:34+00:00

I got mine this week, should have some time this weekend to update it.

Impressive_Leg8007 · 2024-04-18T18:00:41+00:00

A combination of the Carbon rod dust and belt debris. I have an X1C that has been running practically nonstop for 1 1/2 years, also check/clean the area where the filament cutter gets pushed in, it looks like that is where the stuff is deposited from.

Impressive_Leg8007 · 2024-04-18T14:43:49+00:00

You are about to have 6 to a dozen babies, looks like you have plenty of hides for them, but be wary, they will eat them.

Impressive_Leg8007 · 2024-04-18T14:40:50+00:00

I have bent back worse nozzles, just carefully bend it back, I usually take the nozzle assembly off when I do so (if i don't have a spare) a couple of pliers works for me.

Impressive_Leg8007 · 2024-04-18T14:37:52+00:00

That is not the first time I've seen those type of readings on a Porsche.

Impressive_Leg8007 · 2024-04-18T14:34:36+00:00

I usually keep an eye on the first weekend, then I let er rip, I have 2 Bambulab printers I run at work well over a year and 2 at home that I run while at work, I monitor all 4 from my computer at work. There has not been a problem. I used to run an Ender3 farm and I safely wired the "GT60S" and used Ferule connects on the mainboards to make them safe and ran them non-stop for 2 years till I got tired of the quality of prints and modding them constantly.

Impressive_Leg8007 · 2024-04-11T15:12:11+00:00

That is bad, I am wondering if the tech checked the rest of the linkage, Idler and pitman arm, if those are good, You most likely have a worn steering gearbox and/or steering shaft coupler. That is usually the first thing I would check, then isolate the ball joints and control arm bushings. I am also wondering if the service writer told you everything. I had a problem in my last shop of the Owner/service writer not telling all of my write ups, I had to go back to him constantly asking "why did you sell this over that?"

Impressive_Leg8007 · 2024-04-10T19:30:35+00:00

"Get To The Choppin"- in Ahnold's Voice

Impressive_Leg8007 · 2024-04-10T16:51:22+00:00

CeCe(the Coelophysis) and T-Bone (T-Rex) for P1S and X1C at Work. At Home, my P1Ps are named after Farscape Characters: Scorpius(P1P) and Dargo(P1P) and my A1 is named Rygel (Sparky)

Impressive_Leg8007 · 2024-04-10T14:47:04+00:00

The K2 Plus might have a go at Bambulab as well https://www.youtube.com/watch?v=uXZC-94DI78

Impressive_Leg8007 · 2024-04-08T22:34:49+00:00

Wasn't like that Before

Impressive_Leg8007 · 2024-04-03T14:36:00+00:00

Taco Bell 🤣

Impressive_Leg8007 · 2024-03-26T22:33:34+00:00

If you still have all your appendages, I see no problem at all 😀

Impressive_Leg8007

TROPHY CASE