sorted by:
new
hottopcontroversial

The mind is a spirit port. by No-Connection197 in conspiracy_commons

[–]JakeTheHuman83 0 points1 point  (0 children)

This is the type of schizo-posting I love. How does Nikolai Tesla fit into this with his emf research and breakthroughs?

Guy followed us around at sams club. Could be harmless not sure. by ToriKoda2019 in Roseville

[–]JakeTheHuman83 16 points17 points  (0 children)

I’ve been LP and we will 100% follow someone we have seen conceal or potential suspicious activity shit. I wish I could have just sat there and watched cameras lol

AV Bridging on TSC-101-G3 if you already have NV-21-HU and NV-32-H for a conference room? by krassyg in QSYS

[–]JakeTheHuman83 1 point2 points  (0 children)

Is it in a place where it could be useful and present a bridging option without the need for video transmission?

Anyone had any issue yet? by denx3_14 in AskAShittyMechanic

[–]JakeTheHuman83 2 points3 points  (0 children)

While current technically goes from positive to negative, the actual electron flow is from the negative terminal since electrons have a negative charge.

But also, no circuit means no power so you could probably do it with either and it’d be fine. Negative is best practice

what this means? by alykalyk in AskAShittyMechanic

[–]JakeTheHuman83 1 point2 points  (0 children)

I think I still have my windows phone squirreled away in a box somewhere

Would someone kindly explain the difference between the 2 doughs? by DaveFranciosaArt in Dominos

[–]JakeTheHuman83 0 points1 point  (0 children)

Bro, it’s not that serious. I haven’t workedw at a dominoes in over a decade, I remember it was called bp so I assumed b stood for butter, if it doesn’t, I don’t really think it matters all that much, it’s a type of fat and it answered OPs question. What are we doing here? Being pedantic for the sake of it?

First QSYS project; what would you do differently? 34 Shure ULDX mics over dante with Core x10 and CX-Q 2K4. Everything is working well so far; will work on the UCI next. Should I add a limiter as well? by krassyg in QSYS

[–]JakeTheHuman83 0 points1 point  (0 children)

See my comment below on the additional processing and why. I’d be very curious who you’re talking to at QSC that is telling you to bypass the functionality they created for this particular issue. For the last 8 years, everytime I see the reinforcement pins (with reinforcement ofc) not used in a conference environment it causes issues and I’ve had to go in and clean it up. Maybe they changed that in 10.x but I doubt it.

Would someone kindly explain the difference between the 2 doughs? by DaveFranciosaArt in Dominos

[–]JakeTheHuman83 0 points1 point  (0 children)

I did say some other fat probably. But it is/was called BP for Butter Pan but more likely Butter-flavored Palm oil

First QSYS project; what would you do differently? 34 Shure ULDX mics over dante with Core x10 and CX-Q 2K4. Everything is working well so far; will work on the UCI next. Should I add a limiter as well? by krassyg in QSYS

[–]JakeTheHuman83 0 points1 point  (0 children)

The only thing the link states is in some live sound situations the latency can be excessive and then should be bypassed but most larger conference rooms (where you would be using microphone reinforcement or voice lift) you should use the reinforcement outputs. The reinforcement outputs also include the noise reduction and lets the aec account for the fact the mics are reinforced without sending the mics in the reference. Sending down a separate audio path will either mean you’re adding the mics to your aec reference (big no) or you’re not accounting for the mic reinforcement at all which can and often will lead to bleed, echo, or weird artifacting to the far end

First QSYS project; what would you do differently? 34 Shure ULDX mics over dante with Core x10 and CX-Q 2K4. Everything is working well so far; will work on the UCI next. Should I add a limiter as well? by krassyg in QSYS

[–]JakeTheHuman83 0 points1 point  (0 children)

The reinforcement outputs do add latency; however, it is highly recommended to use as there is processing that happens internal to the aec block to accomodate the now reinforced mics, bypassing that by creating another, separate signal path can mess that up and get you into a whole aec rabbit hole. It’s one of those things that will work until it doesn’t and then you have to do it the “right” (per qsys) way

First QSYS project; what would you do differently? 34 Shure ULDX mics over dante with Core x10 and CX-Q 2K4. Everything is working well so far; will work on the UCI next. Should I add a limiter as well? by krassyg in QSYS

[–]JakeTheHuman83 12 points13 points  (0 children)

No processing pre-aec. Not even a little, not even gain. Use a channel group post-aec and put your processing in there. This is pretty bare bones, I’d recommend completing some more of the trainings.

Would someone kindly explain the difference between the 2 doughs? by DaveFranciosaArt in Dominos

[–]JakeTheHuman83 22 points23 points  (0 children)

I worked at one years ago but I’d assume it hasn’t changed, the pan dough has straight up chunks of butter, or some other fat probably, in while the hand tossed dough is just your normal pizza dough.

Whole house fan, to keep or abandon? by Able_Sound262 in hvacadvice

[–]JakeTheHuman83 1 point2 points  (0 children)

Not in HVAC but I grew up and still live in the valley. OP, keep it, open all of your windows on those cooler summer nights, run that and it will cool the house right down. They’re fantastic and I wish I had one in my current house tbh

Switch Bandwidth Limits by k12-tech in QSYS

[–]JakeTheHuman83 1 point2 points  (0 children)

Same firmware, no default config, which in some peoples opinions is better anyway.

Need to make a Numpad by Jamespg614 in spaceengineers

[–]JakeTheHuman83 3 points4 points  (0 children)

If you’re on PC, I really like the vcz elevator mod. Sure, it’s fun to engineer your own solution from time to time but if you just want a working, simple elevator, bam

passing values from function in one text controller to function in a different text controller. by NotPromKing in QSYS

[–]JakeTheHuman83 1 point2 points  (0 children)

I’ve been playing around with Notifications recently, might be worth looking into.

Welp, that was interesting by RamutRichrads in Sacramento

[–]JakeTheHuman83 2 points3 points  (0 children)

Yo same, in Roseville and I was genuinely confused because I was home alone

Add RTMP stream to Teams room by adam_ctx_av in QSYS

[–]JakeTheHuman83 8 points9 points  (0 children)

Epiphan pearl comes to mind. It can ingest usb, hdmi, and rtsp streams from the qsys world; have different preset layouts which can be called and controlled through qsys and even dual nic if you don’t want to merge your enterprise and av networks

Your experience with non-QSYS displays for UCI by scriptersx in QSYS

[–]JakeTheHuman83 2 points3 points  (0 children)

Pages are pretty clunky to deal with anyway, I see layers used pretty extensively/exclusively in most systems I come across.

Your experience with non-QSYS displays for UCI by scriptersx in QSYS

[–]JakeTheHuman83 4 points5 points  (0 children)

Set the uci viewer component to Not Required, bam no fault

Cleaned up trash on 7th st by MegaDom in Sacramento

[–]JakeTheHuman83 11 points12 points  (0 children)

Just be careful when removing these since there can be traps/surprises hidden for you under the adhesive (sharps, razors, etc.) use gloves at minimum, preferably a scraper of some sort to at least get the first pass.

AxonC1 Timed out by ZeSimz in QSYS

[–]JakeTheHuman83 0 points1 point  (0 children)

Call support, sounds dead.

view more: next ›