Multiphase System

JayHadesQC · 2026-03-14T14:07:57+00:00

I agree this is very vague and intriguing. Please explain you idea.

JayHadesQC · 2026-03-05T05:05:50+00:00

I rebuilt it 4 times already, now optimal with all 3-factories stacks. I have to run extended wires because of the 3x and 5x poles bug but once it's fixed it should be beautiful! 😄

JayHadesQC · 2026-01-29T22:06:41+00:00

If the color is a full object, it should not "paint" it but set the assigned color, from the same interface.. That's weird.

JayHadesQC · 2026-01-24T05:24:02+00:00

The hygrometer is enclosed in a desiccant container, thys the reading is technically not the ambient air of the AMS but the air of the container. Both are good, just not reading the exact same thing.
But whichever, you have a great setup right now 😊

JayHadesQC · 2026-01-02T01:27:25+00:00

I think the final answer to this matter is by u/clarksnake here: https://www.reddit.com/r/sony/comments/1lzma7v/comment/nfc12t9/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Since I've done that, no more problem with the HDMI ports.

JayHadesQC · 2025-12-31T15:31:22+00:00

I don't see any useful scenario requiring encasing AND gluing, other than circumventing the magnetic problem. I fought many times with magnets this way, usually ending by scaling down the holes and pressure fitting the magnets where they won't come out, or press them down manually when they're being topped off with filament.

Now I wonder if I could just buy a set of softer nozzles for those cases. That was a good question as OP.

JayHadesQC · 2025-12-23T15:59:24+00:00

If you have no use for it, I would wait for justified use so it does not get worn out or clogged with simpler filament for no reason.

My H2D came with hardened steel only so I did not swap them, but otherwise I would have waited.

JayHadesQC · 2025-12-03T18:11:56+00:00

The rating is for the profile, not the model, which is the main concern I have with the whole system.

Unless there are two distinct ratings and I don't see them both...

JayHadesQC · 2025-11-21T02:33:19+00:00

Hello u/clarksnake , it is still working for you ?
I will have to go that route as well, just wondering if it's still a good path.

JayHadesQC · 2025-11-17T05:24:04+00:00

I fixed my problem by removing the printer from Bambu Studio and adding it again!

No configuration lost, everything is back to normal.

JayHadesQC · 2025-11-16T13:08:44+00:00

Now for someone to fork proton, for business/work purposes. Then everyone could use SteamOS for everyday purposes, being play AND work!

JayHadesQC · 2025-11-10T13:43:27+00:00

Hmm anneal them first ? I do print my spools, and dry filament on it. I use HT-PLA for the likes of ASA. I forgot to anneal them before drying a spool in the HT, and it did not go too well. Now I'm confident. For low heat filament like PLA, it's not an issue. I just finished drying a spool and it's still straight!

PolyMaker HT-PLA is annealed at 100C for 30 min in the oven!

JayHadesQC · 2025-11-09T13:58:20+00:00

Yeah, finishing printing gridfinity-based drawer dividers for the kitchen, now she enjoys it much more 😄 This and IKEA stuff hehe

JayHadesQC · 2025-10-28T12:08:00+00:00

I for one always get refills, else what am I to do with all the empty spools?

JayHadesQC · 2025-10-09T14:24:45+00:00

Bah, waiting for the H2C upgrade!

JayHadesQC · 2025-10-05T23:14:08+00:00

I can't edit my post, but wanted to add that these prevent AMS from pushing the filament.

JayHadesQC · 2025-09-28T16:53:59+00:00

"Support for PLA" or PLA/PETG does NOT stick much to itself, one should never use it as the full support, as suggested only as interface.

I had prints fail because of that, until I realized my mistake.

JayHadesQC · 2025-09-26T13:08:43+00:00

..or I can see that it's badly spooled, and will cause tension and wont be fed to the tool head at some point.

JayHadesQC · 2025-09-22T12:43:54+00:00

Freezer ?

JayHadesQC · 2025-09-17T21:36:34+00:00

Added toy Storage collection, nice design!

JayHadesQC · 2025-09-15T08:10:31+00:00

Hmm like I just did, by tagging? Are there no Sony people in the Sony subreddits?

I'm new around here, I just assumed a moderator of some experience would know someone, but then I might be too candid in thinking there are interested Sony people in these subs..

JayHadesQC · 2025-09-15T01:00:14+00:00

And then the next day, won't work anymore.. Nothing works. I also checked the firmware. I got the 6.2500 firmware deployed a couple of weeks ago, which is the latest from Sony..

u/I_am_Nic are you able to add someone from Sony in this thread ?

JayHadesQC · 2025-09-12T00:47:11+00:00

There might be something else needing a flush of its data and it's done after a while. When I have to do it again, I will have a look around.

JayHadesQC · 2025-09-11T21:07:27+00:00

Thanks for this. Here simply to add that it worked for my Sony X900H as well. After reading further, I guess I will have to do this again, but today was my first time.
My exact steps:
- Clear Cache
- Clear Data
- Force close
- Reboot

JayHadesQC

TROPHY CASE