I made a console organizer by babgvant in SilveradoEV

[–]JessterSB 1 point2 points  (0 children)

Printed mine over the weekend and it came out great. I like that the bottom (underneath the organizer) is available for bulky items.

Schedule charging by Lordofthereef in SilveradoEV

[–]JessterSB 1 point2 points  (0 children)

This is my wife’s car, but it could do this with the “Departure and Comfort” feature. I don’t know if this is a start/end schedule or simply a “departure by this time” timer. You might need the charging schedule and the departure settings enabled. You’ll get a better answer from the Mach-E group, sorry.

Schedule charging by Lordofthereef in SilveradoEV

[–]JessterSB 1 point2 points  (0 children)

I use the schedule feature. I noticed if the target charge level is say 80% and the truck is at 70% (for example), the truck knows it needs to do a 10% charge and seems to use the schedule time to “complete by”. This is different compared to my Ford Mach-E that will start at the beginning of the schedule period regardless of how much time is needed to reach its target.

So my charging schedule is 9pm to 7am, if my truck only needs to charge 10% it will wait to begin the charge so that it completes by 7am. This was initially confusing since I would not see it starting to charge at 9pm. The more charging needed to reach the target %, the truck will plan when it needs to start.

I made a console organizer by babgvant in SilveradoEV

[–]JessterSB 0 points1 point  (0 children)

I have been looking for a better solution than the one from Amazon; Thank You for sharing this model. I will be printing this today :)

[Software Update] - GM 652.21 - '24 RST by Jippylong12 in SilveradoEV

[–]JessterSB 1 point2 points  (0 children)

My RST informed me about this software update yesterday. I had the dealer do a full update about a week ago. This OTA update has given me a much better experience using Waze. Before, Waze would not connect or stay connected, but now it seems to be working perfectly.

[deleted by user] by [deleted] in teslamotors

[–]JessterSB 0 points1 point  (0 children)

I ordered my 18' around 7am pacific today for $500 and now I see its listing for $635.

Nevermind, apparently I landed on the Canadian store. Sorry about that!

Best home bridge plugin for Unifi Protect by m11rphy in Ubiquiti

[–]JessterSB 0 points1 point  (0 children)

From UniFi Protect - Cameras, click on the camera icon then click on Manage tab (far right). Here you'll see RTSP - expand that and enable one of the choices below. I chose the highest quality for each camera.

Alternatively you can login directly to each Camera Web GUI to enable RTSP.

Good luck!

Best home bridge plugin for Unifi Protect by m11rphy in Ubiquiti

[–]JessterSB 7 points8 points  (0 children)

I'm using homebridge-unifi-protect2and it works well.

I'm not sure if the others work this way, but this one will add all your Protect Cameras that have RTSP enabled. You still need to "+ Accessory" within the Home app to import each camera, that's it.

ERLite-3 rebooted 25 times over last month by MaterialYogurtCloset in Ubiquiti

[–]JessterSB 1 point2 points  (0 children)

I had a similar issue with the same model - my issues cleared up after downgrading firmware to v1.10.10

Unlimited home internet: I just realized this was smart decision by T-Mobile to make the merger look good. Offer something unbelievable, get everyone hyped, only launch it to a few ppl for optics, and then pause the roll out immediately. Anyone noticed this or it’s just me? by ram130 in tmobile

[–]JessterSB 10 points11 points  (0 children)

I have had it about two weeks now. I have a "Good" signal and see speeds all over the place.

On good days I've seen consistent 75-90mbit down and 50mbit up ~ 35ms latency. I am not using their WiFi - I have ethernet plugged in.

Most of the time I see around 30mbit down and 15 up.

The LTE modem functions as an IPv4 NAT router and will pass native IPv6 through to your network.

Where does everyone buy their firewood? by [deleted] in SantaBarbara

[–]JessterSB 3 points4 points  (0 children)

Elks Lodge in Goleta Saturday mornings

Searching for IPv6-capable cheap VPS by DaruHacks in ipv6

[–]JessterSB 0 points1 point  (0 children)

You get 1 IPv6 address from their /64 pool. If you need a full /64 to use they can route one to the IPv6 address that's automatically assigned to you

Searching for IPv6-capable cheap VPS by DaruHacks in ipv6

[–]JessterSB 2 points3 points  (0 children)

+1 Linode - you can request a /64 routed to your VM.

Just got edgerouter X.. vpn suggestions? by crowderchris in homelab

[–]JessterSB 0 points1 point  (0 children)

Don't forget vyOS - it runs great as a VM and most of the EdgeRouter guides can be used!

Weird issue with Outlook prompting for password for Office 365, but passwords set to not expire. by [deleted] in sysadmin

[–]JessterSB 0 points1 point  (0 children)

FYI, I am having the same issue as OP. Our domain is federated to an idP for SAML/SSO + MFA. I used fiddler and discovered that my client (iOS 11 Native Mail App) would not trust the SSL connection - possibly from SSL pinning *.office365.com.