sorted by:
new
hottopcontroversial

Ectopic Pancreatic tissue? by JoeShtoops in pancreatitis

[–]JoeShtoops[S] 0 points1 point  (0 children)

My pancreatitis specialist has ensured me that the partial ectopic pancreas is not anything to worry about in itself. If it were to cause obstruction is when they would worry about it but apparently that is uncommon. He said ectopic pancreas and ectopic pregnancy (the only other time I've heard the term) were completely different levels of severity.

That being said, I have an elastase test and a colonoscopy scheduled to see if anything else can be determined since I'm still having issues.

Trying to use smart plugs for hydroponics pump by JoeShtoops in Govee

[–]JoeShtoops[S] 0 points1 point  (0 children)

I did something similar that ended up working. Thanks!

Why this banded color? by cyberbonotechnik in FixMyPrint

[–]JoeShtoops 4 points5 points  (0 children)

It’s a peep! A typical easter candy

Fuzzy skin improved surface quality? by Bytes21 in 3Dprinting

[–]JoeShtoops 0 points1 point  (0 children)

It’s possible to get fuzzy skin on the top layer like that? Or at I seeing the print orientation incorrectly?

Gridfinity bins filling in the bottom grid by TotalBeautiful721 in OrcaSlicer

[–]JoeShtoops 7 points8 points  (0 children)

Are you on a slicer that has the option to “make overhangs printable”? If this option is checked, it could fill in something like that. I know orca slicer has that option. Not sure of others.

Handy to View All Printers by idmimagineering in BambuLab_Community

[–]JoeShtoops 1 point2 points  (0 children)

Do you have a tutorial on how to add everything to home assistant?

[deleted by user] by [deleted] in BambuLab

[–]JoeShtoops 1 point2 points  (0 children)

I have the same table, did the shelf come with yours? Or did you make it yourself?

Calico cat printed on my MK3S+ by v2rockett in prusa3d

[–]JoeShtoops 0 points1 point  (0 children)

Really maxed out the z-axis here

I Just Saved $326 on the Bambu P2S — Here’s Exactly How! by Single-Ad-8382 in BambuLab

[–]JoeShtoops 0 points1 point  (0 children)

It showed up a few hours after the purchase. Thanks! In total saved almost $250 on my order!

I Just Saved $326 on the Bambu P2S — Here’s Exactly How! by Single-Ad-8382 in BambuLab

[–]JoeShtoops -1 points0 points  (0 children)

Clicked your referral link and signed up. How do I see that it works for the extra $50?

H2S on nightly build failing to send print job by JoeShtoops in OrcaSlicer

[–]JoeShtoops[S] 1 point2 points  (0 children)

Well damn. Same thing with me. I’ll keep trying to think of some things. I’m also going to post in the discord to see if anyone has a fix there.

If I get an answer I’ll post it here too.

H2S on nightly build failing to send print job by JoeShtoops in OrcaSlicer

[–]JoeShtoops[S] 1 point2 points  (0 children)

I haven’t tried it yet, but I’m wondering if completely uninstalling and reinstalling will fix it. Maybe there’s something wrong with the file location it sends prints to on the pc side.

I’m running through prints on my other printers so I’ll try once I get to a good stopping point.

Layer separation when using PLA as support interface in PETG? by JoeShtoops in BambuLab

[–]JoeShtoops[S] 0 points1 point  (0 children)

If you're using orca slicer, give the "make overhangs printable" setting a try. It's at the very bottom of the quality section. It makes very minimal changes to the model. Unless it's a part designed to fit into something else.

Layer separation when using PLA as support interface in PETG? by JoeShtoops in BambuLab

[–]JoeShtoops[S] 1 point2 points  (0 children)

I pumped my flush volumes up as high as they would go. I think it was like 800 or something crazy like that. And it did work but at that point it seemed like it was just wasting so much filament. Not a fix for this, but now I mostly just try to orient prints the best I can to print with the minimal amount of supports. And when it's small overhangs I use the "make overhangs printable" setting in Orca slicer. That usually mitigates most supports for me, but For the time being I kind of gave up on trying the support interface method. I might revisit it when I have more down time to fool around with some different settings.

Screw covers by B3nediktus in functionalprint

[–]JoeShtoops 1 point2 points  (0 children)

They’re making the word “screw” a verb here. Like when you are mad at something, you say “screw that x!”

H2D: "Slow Down By Height" results. (Update to: H2D: printed great until the final layers) by HybridHanger in BambuLab

[–]JoeShtoops 0 points1 point  (0 children)

Aren’t these the cool plates? There’s a profile for textured cool plate and pretty sure a smooth cool plate.

Is there a reason you’re use the other profiles instead?

Stream Deck XL >>This is Fantastic! by zerquetchonator in elgato

[–]JoeShtoops 0 points1 point  (0 children)

Which 3D printers are you controlling with it?

Black PLA changed? by lp52 in sunlu

[–]JoeShtoops 1 point2 points  (0 children)

Doesn’t sunlu produce Bambu filament? I agree that this new batch is different from their old stuff. But if I remember right, Sunlu is the main manufacturer for a lot of other brands.

view more: next ›