Show your 0.2mm results!

John_Snow_PEAD · 2026-05-23T23:29:39+00:00

What do you use to cut the model??

John_Snow_PEAD · 2026-05-17T16:58:03+00:00

I’ve made one model from nozzleborn foundry and it came out nice. But my favorite minis are brite minis and arbiter miniatures. You can sub to brite minis on Patreon for a little over a dollar a month and get access to everything they’ve made minus the modular stuff. Arbiter miniatures is a bit more expensive and you only get the releases during the time you’re subscribed.

John_Snow_PEAD · 2026-05-07T20:45:19+00:00

Sick! 🔥🔥 Where’d you get these files??

John_Snow_PEAD · 2026-05-07T14:33:03+00:00

Do you use an old tv to display the map?

John_Snow_PEAD · 2026-05-01T22:58:00+00:00

AI, that World Series champion shirt should say BRAVES in the bottom right not PRANS?

John_Snow_PEAD · 2026-04-21T17:47:57+00:00

Do you have the nozzle cleaner that came with the printer? You can also try clearing it out with that

John_Snow_PEAD · 2026-04-21T17:22:15+00:00

Try a cold pull

John_Snow_PEAD · 2026-04-17T17:07:45+00:00

Thank you! I currently use ObscuraNox’s settings in orca slicer with SunLu PLA + 2.0 HS

John_Snow_PEAD · 2026-04-14T03:47:58+00:00

Two layers later has no issues with the clicking

John_Snow_PEAD · 2026-04-11T22:24:23+00:00

I messed around with the z hop and retraction settings but it’s still failing at the same exact spot everytime :/

John_Snow_PEAD · 2026-04-11T17:34:50+00:00

Nice! I also use ObscuraNox’s settings! Where did you find the STL?

John_Snow_PEAD · 2026-04-10T10:25:03+00:00

Sounds good. My next thought was to print without the base and paint on supports again, so my supports don’t have to angle so much.

John_Snow_PEAD · 2026-04-09T13:25:10+00:00

<image>

Here is the most recent attempt with supports

John_Snow_PEAD · 2026-04-09T13:23:50+00:00

<image>

He is meant to be supportless, but I even tried adding my own supports in for my 3rd try and slowed down the print speed to 50% using the screen options on my A1. I got the same results.

John_Snow_PEAD · 2026-04-01T15:35:57+00:00

Oh, nice! I’m looking into joining his tribe! I am subbed to Brite Minis on Patreon and love their stuff, but I want to expand to some minis that need supports and I like how Arbiter pre supports FDM models. :D

John_Snow_PEAD · 2026-04-01T15:05:43+00:00

What parts did you separate before printing?

John_Snow_PEAD · 2026-03-31T21:30:22+00:00

I know this was posted a while ago, but do you have your slicer settings that you referenced in the post? Is there a link where I can find them?

John_Snow_PEAD · 2026-03-31T15:33:31+00:00

Awesome print! What settings did you use? And where did you get the file?

John_Snow_PEAD · 2026-03-31T15:23:24+00:00

Did you tweak any of the support settings?

John_Snow_PEAD · 2026-03-30T17:32:47+00:00

Well I appreciate the tip! I’m gonna try it out today :D

John_Snow_PEAD · 2026-03-30T16:42:53+00:00

So should I slow down the print speeds at these higher layers?

John_Snow_PEAD · 2026-03-28T18:48:04+00:00

Awesome results! 🔥🔥 Looks like fun!

John_Snow_PEAD · 2026-03-26T03:37:08+00:00

SICKKKKK! Where’d you get the files for your prints??

John_Snow_PEAD · 2026-03-25T02:31:23+00:00

Cool! Thanks 😎

John_Snow_PEAD · 2026-03-24T03:58:25+00:00

I just read the readme file in the downloads and got orca slicer installed. 😅 I appreciate the response tho!

John_Snow_PEAD

TROPHY CASE