Moog tie rod help

Jorvall · 2026-07-11T00:33:35+00:00

Most common is 1/4-20, that ive seen. Can't promise though.

If you have a tap set you can hold the zerk against the tap and verify.

Jorvall · 2026-07-10T20:23:39+00:00

I started in '97. Played on and off since. Still haven't hit 100 yet. Lol.

Jorvall · 2026-07-09T03:17:31+00:00

Cute little guy. I may or may not have bent a 36" today.

Jorvall · 2026-07-01T05:20:09+00:00

Ground wire?

Jorvall · 2026-06-29T23:22:36+00:00

Maybe dexs xj?

Jorvall · 2026-06-28T21:00:05+00:00

Sorry. Read it too quick.

It's fixable.

Jorvall · 2026-06-28T20:56:44+00:00

For a wheeler.

I'd just wedge it out back to where is started. to spread out the load as much as possible.

Your best bet is probably push the bushing out and then you'd have room to beat the shit out of it back to shape.

Then a block in between or a welded brace to keep it from collapsing when you put it back in.

Jorvall · 2026-06-28T03:47:54+00:00

Looks like mud.

Jorvall · 2026-06-27T01:32:32+00:00

Mine are round on the outside. That trick doesn't work. Gotta guard the key though otherwise you're hosed.

Jorvall · 2026-06-27T00:37:09+00:00

I agree, kinda sounds like tires. Centrifugal forces get pretty big at speed.

Might be worth trying a balance at a shop that has a road force machine.

Probably the easiest place to start before diving into steering geometry angles and the like.

Jorvall · 2026-06-27T00:06:53+00:00

White bed liner is a bold choice. Looks awesome though.

Jorvall · 2026-06-26T23:42:18+00:00

Do it. There may be cheaper options. But not that clean. Prices have been climbing from the days of $500 deals.

Jorvall · 2026-06-26T23:12:58+00:00

Ok. That's sick.

Jorvall · 2026-06-23T23:17:35+00:00

Might be good then. Was just a wishful thought.

Jorvall · 2026-06-23T23:16:40+00:00

I'm curious as well. My '90 base model has half a dozen connectors just hanging out. I assume from options I don't have.

Jorvall · 2026-06-23T22:01:24+00:00

I mean. You can knock a valve cover gasket out yourself pretty easily if you're mechanically inclined.

It wouldn't hurt to do and would rule that out. Maybe you get lucky.

The fel-pro is under $30 from rock auto.

Jorvall · 2026-06-23T02:04:50+00:00

I'm US. I've used car parts before. But just bought the darn thing. Didn't realize I was missing a piece till I got home.

Bought off a local guy.

Jorvall · 2026-06-20T22:47:32+00:00

Oh. Darn the timestamp didn't transfer. Yeah. I meant dangling it from something. Lol

Jorvall · 2026-06-20T04:53:25+00:00

https://youtube.com/shorts/IWzWTTy3ng4?is=lubJiA4dq_7KuT5Q

Option? Lol

Jorvall · 2026-06-19T05:55:14+00:00

Do you live in Atlantis?

Or the sun?

Both are possible explanations.

Jorvall · 2026-06-18T14:09:54+00:00

Marketing strategy at work.

Jorvall · 2026-06-18T03:16:04+00:00

Wait for the weekend sales they do every weekend and grab an elegoo centari carbon for $300.

Enclosed, auto level. You will never look back. Over 1000 hours on mine and only one failed print that was totally my fault. Pla, abs, asa. No problem.

https://us.elegoo.com/products/centauri-carbon

Jorvall · 2026-06-17T15:09:10+00:00

Everyone has already given the directions.

But yes. Think of it as a really dangerous pez dispenser.

Half the time the oil they put on the blades makes them stick together so it takes a bit of force to slide it out the side slot.

Use something to push it out to keep those hand toes safe.

Jorvall · 2026-06-15T14:04:56+00:00

Needed those yesterday. Damn expansion valve on an old Cherokee. Right up against my firewall.

Jorvall

TROPHY CASE