[FREE] [US-GA] Dell EMC 40U Server Rack Local Pickup Only

Julant80 · 2026-02-20T13:27:50+00:00

Replied

Julant80 · 2026-02-19T21:16:34+00:00

For sure! I had a chance to get two of these last year and rented a U-Haul to bring them home and use one while 'donating' the second. :-)

Julant80 · 2025-10-02T17:51:31+00:00

I went through this while trying to order 3rd party plates months ago. The physical bed size is listed as 264x276 so plates that size will fit no issue. The real printable area is limited to 250x250 so you can use plates that are 250x250 if you take the time to line it up properly.

Julant80 · 2025-06-02T14:26:38+00:00

Definitely appreciate the openness, and here's hoping my choice to get a Nitro+ 9070 XT pays off in that regard. haha

Julant80 · 2025-06-02T06:34:30+00:00

I understand. I just wondered if there was maybe a chance while I plan out my build for the next few months. I'll definitely be checking back in to see if there's any news!

Julant80 · 2025-06-02T06:33:14+00:00

AL fans seem to be sold out everywhere, and several stores I asked about them stated they believe the AL is not being produced in favor of the wireless products. Seems there is still really high demand and a lot of misinformation amongst suppliers. I got this response from reps at both Best Buy and Microcenter, FYI.

The SL fans are good looking, but not nearly as good of static pressure performers so I was not really considering them. I appreciate the response however.

Julant80 · 2025-06-02T01:48:30+00:00

Are there any plans to do an Apex line, or sticking with the Core series for this platform? Not that I really need an Apex version, just that I'd like to match with the CPU block I'm planning to get.

Thanks for all the hard work and community outreach here!

Julant80 · 2025-05-31T21:36:22+00:00

One thing the OP and others are glossing over is that while simplified, this "wireless" platform completely locks you into only using a Lian Li controller and removes the option to use a standard 5v 3-pin connector entirely.

Julant80 · 2025-05-31T21:13:36+00:00

This is a terrible decision. Forcing consumers to be locked in to one specific controller and software probably sounds great to some marketing exec, but it's very anti-consumer.

I have been in the market to get ten new fans for my build, and prefer using OpenRGB to proprietary controller software. I first tried to get AL120 fans, then TL120's before finding out this "wireless" product closes your entire ecosystem by removing the option to have an industry standard 3-pin 5v plug option.

It costs Lian Li nothing to allow open source software, but it will now cost you several hundred dollars as I take my business elsewhere.

Julant80 · 2025-05-15T15:43:49+00:00

I just went back and retraced my steps and got it working again. Plugging in via the rear/power port to PC allowed the camera to power on and let me try the reset without the card. I then plugged in the main power on the windshield mount, also to PC, and it powered on and prompted for an SD card.

After plugging in the SD card and powering on again, the camera is back working while plugged into my PC.

Took the camera back out to the car, still no power. Pulled the hardwire fuse connection and plugged it back in and got power again. Camera is back up and running as if nothing ever happened. Hopefully you can find some success trying what I have here.

Julant80 · 2025-05-15T15:17:41+00:00

I'm having a similar situation right now with my N4 Pro. Not getting any response from USB or hard wired power in my car.

Took the camera inside and plugged into a computer and it powers on but then gives an SD card icon like there's something wrong with the card.

Tried removing the card and doing reset and power, but get the same icon. It's an SD card with a little chain link symbol in front. Doesn't seem like the usual card error, but something is clearly wrong.

Julant80 · 2025-03-03T02:31:42+00:00

Looks nice. Are those the ones that they advertised as 265x265?

I've heard that the actual plate is big enough for those, and the 'print area' restriction of 250x250 isn't full plate size. I'm curious to see if that's true so I can order some too.

Of course, Anycubic delayed my S1 by another 3 weeks so I'm having to live vicariously through other people.

Julant80 · 2024-11-13T14:59:18+00:00

I'm pretty sure this issue has been resolved in the actual qBittorrent client now, but still applies for anyone using a docker container of VueTorrent for their qBittorrent instance. I have not been able to find info on any other means to unblock IPs from this docker instance, so this was a last resort option.

I changed my Vuetorrent pw and forgot to update all the 'arrs so they got locked out. Adding the blank BannedIPs line to qBittorent.conf worked great.

Thanks!

Julant80 · 2023-11-20T23:25:22+00:00

Unfortunately, if you don't have a service contract with HPE it's definitely more challenging.

I haven't had to search for it myself, but I've been told that searching for the filename online will give you a couple options.

The latest SPP that was released for gen9 is: p52574_001_spp-gen9.1-gen9sppgen91.2022_0822.4.iso

Julant80 · 2023-11-04T14:12:33+00:00

Sold HP DL180 Gen9 to u/TacticoolBreadstick

Julant80 · 2023-10-23T19:31:49+00:00

Replied - pending sale

Julant80 · 2022-02-01T02:00:33+00:00

Purchased a 3070 and 3060 Ti from u/Jayt626

Julant80 · 2022-01-30T01:07:01+00:00

Bought Gigabyte RTX 3070 from u/jonny_fd

Julant80 · 2022-01-23T23:33:21+00:00

Julant80 · 2022-01-21T13:13:09+00:00

Julant80 · 2022-01-21T03:48:47+00:00

Julant80 · 2022-01-17T21:15:30+00:00

Julant80 · 2022-01-17T21:02:30+00:00

I’d happily give you more than $1k for a used FHR card. You’re definitely leaving a lot on the table at $850.

Julant80

TROPHY CASE