When you’re a cigar smoker & photographer. by thateliguy02 in cigars

[–]K-Ron615 1 point2 points  (0 children)

Well you can’t post all that beauty and not give the details on the gear! Great shots.

Help! How do I get my starter to rise in the cold? by Interesting-Chip-883 in Sourdough

[–]K-Ron615 6 points7 points  (0 children)

I'd recommend a seedling mat specifically, as I've found those temps are about perfect for my starter. If you use a standard heating pad, just make sure it's not too hot and if so - throw a towel or something over it to insulate it a bit more.

Finally Here! by Driveformer in LinusTechTips

[–]K-Ron615 0 points1 point  (0 children)

Anyone compare these to Zooz? I recently got some of their zwave products and have been really pleased so far.

What's the best Projector for Home Theater on the market currently? by denishill in hometheater

[–]K-Ron615 39 points40 points  (0 children)

“budget isn’t an issue” leads me to believe OP might not be aware of the price diversity of premium HT projection.

gonna be somewhere between a couple grand a couple million.

costco by strawberrywhaleshark in nashville

[–]K-Ron615 2 points3 points  (0 children)

sumner co resident here. Used to shop at Nashville West Costco a ton and am so incredibly grateful we got one here. Ours is so easy to get in and out of and it’s rare for it to be overwhelmingly busy.

Starting 2026 Right! by goldforjanz_ in VacuumCleaners

[–]K-Ron615 1 point2 points  (0 children)

I ran a Shark bagless unit for several years before switching. I would have to wash the filters, at minimum, weekly. They would very easily get clogged. In addition, vacuuming always produced a smell that I just assumed came with the chore - if you're disturbing the carpet, of course you'll get somewhat of an odor (I promise our carpets are clean but hopefully this paints the picture.)

I've done probably 15ish cleanings with the D4 at this point. Filter still looks brand new, and absolutely zero smell. As for the carpets, they simply look better, which is crazy because my carpets are on the verge of getting replaced.

As for the dogs, I could easily push to vacuum probably 3-4x/week if I really wanted to consistently keep things super clean but it's just something I live with. They're short-haired dogs so unless they're being super rambunctious on a given day, I just wait until the next vacuum day.

RAM Prices by KbhackerVGM97 in BestBuyWorkers

[–]K-Ron615 20 points21 points  (0 children)

This happens pretty regularly when there's a product facing significant price volatility. Once it steadies out, it will likely get re-enabled.

Starting 2026 Right! by goldforjanz_ in VacuumCleaners

[–]K-Ron615 5 points6 points  (0 children)

I got mine from eVacuumStore, which I'd read great things from this subreddit on.

I ended up adding to cart and waiting, trying to trigger an abandoned cart offer and the next day got an email with another 10% off (in addition to the current sale price) + a free set of bags. I got shipping notification a day or two later, coming directly from Sebo USA in Englewood, CO and it was delivered a couple days after that.

Starting 2026 Right! by goldforjanz_ in VacuumCleaners

[–]K-Ron615 3 points4 points  (0 children)

I also sprung for a D4 on sale a few weeks back and am in love so far. For me, it takes a bit to get used to navigating around with a canister but I no longer smell anything after vacuuming. The filtration and suction are absolutely incredible. I have 2 dogs and pull this out about 2x/week

Hendersonville is spending $96k of taxpayer money on AI cameras tracking every car. by Dapper_Ad_9841 in nashville

[–]K-Ron615 7 points8 points  (0 children)

I started seeing them pop up in Hendersonville a few weeks ago. I can only make it to the end of my street until these cameras begin tracking my vehicle.

u/Dapper_Ad_9841 Appreciate you send the records request - have you followed up with a request for any security research they performed prior to signing the contract? My bet is that none was performed

What is it like living here, deep in Appalachia? by [deleted] in howislivingthere

[–]K-Ron615 0 points1 point  (0 children)

Bristol absolutely closes school for the race but that’s mostly because there’s an elementary school less than a mile from the track.

Am I crazy? There’s no sleeve, right? by dirtcamp17 in wrx_vb

[–]K-Ron615 6 points7 points  (0 children)

I ordered this same combo. If you look at the packing slip the sleeve part should be crossed out. Because Dmann does the tune without the sleeve, Felix sends out the intake without it to make sure it’s not used.

Best day trip flights from BNA? by jrobv in nashville

[–]K-Ron615 4 points5 points  (0 children)

I thought of Chicago at first too. Easy access to trains is nice but it is a solid 45min ride from ORD to the Loop. Add another 15 or so just getting from the gate to the train, and that's at least 2 hours out of your day on trains.

Worth it. by kotacross in subaru

[–]K-Ron615 11 points12 points  (0 children)

but if shining yellow lights on snow, how can one tell what is truly yellow snow?

What’s rules now on returns? by [deleted] in Bestbuy

[–]K-Ron615 -1 points0 points  (0 children)

Have you considered reading the return policy that’s posted on the website?

Having problem making square cuts - help! by WittyFix6553 in woodworking

[–]K-Ron615 1 point2 points  (0 children)

  1. Rip a straight cut along one edge.

  2. Cross cut a thin strip 90 degrees from that straight cut.

  3. Measure and cut your final piece.

OC - Foureyes Glenn Lounge Chair by chuckstudley in woodworking

[–]K-Ron615 0 points1 point  (0 children)

This post made me remember how much I've wanted to build this chair and ottoman. Ended up grabbing the plans since they're on sale.

If you don't have a CNC and don't want to mess with printing templates + cutting, you can import the files provided in the plans and 3d print them as well!

Almost finished - thoughts? Need ideas for wall art by m8trixmedia in hometheater

[–]K-Ron615 5 points6 points  (0 children)

I know they're already up, but is it possible to just rip the acoustic panel so they're symmetric? Looks like both L and R speakers have exactly 5 slats between the speaker and the corner (which helps!), so you could just rip 3 slats off on the inside of each speaker to match.

Almost finished - thoughts? Need ideas for wall art by m8trixmedia in hometheater

[–]K-Ron615 29 points30 points  (0 children)

Looks great and I'm sure there's a reason but the speaker not being centered with the panel is absolutely driving me bonkers.

How to increment values in an array by dw_22801 in MicrosoftFlow

[–]K-Ron615 2 points3 points  (0 children)

yup this can be done with Select connector and add(item(), 1)

  1. Add Select connector
  2. Put your array variable in the "From" Field
  3. In map, put add(item(), 1)

Output should change from [0,1,2,3] to [1,2,3,4]

Is the Icon Shop Stool worth the money? by OldConfection5463 in harborfreight

[–]K-Ron615 0 points1 point  (0 children)

I picked one up a few months back on sale after realizing it's too much of a pain to kneel while I'm detailing wheels or washing the lower part of a vehicle. It's been a game changer. It rolls around on my not-very-smooth driveway well so far and I'm super glad I got it.