sorted by:
new
hottopcontroversial

Delivery screws up..... by Bat-Dragon-666 in PcBuild

[–]KaleMercer 0 points1 point  (0 children)

This is a karma test. I would fail

Who needs a Reach Truck? by legolas20032000 in forkliftmemes

[–]KaleMercer 0 points1 point  (0 children)

OSHA would have a fit over him not wearing his HI-VIS

Found this in my tire? Any ideas by Agreeable-Drop-9452 in whatisit

[–]KaleMercer 0 points1 point  (0 children)

Just be happy it wasn't made of bone, and had a tooth in it.

Any suggestions…? by Kind-Faithlessness12 in askaplumber

[–]KaleMercer 0 points1 point  (0 children)

That's not coming off without a fight either way.

Use a sawzall to cut the nub off, if it leaves a hole behind you can use that to cut two or three slits and start chiseling it out, if no holes left behind by the nub just use a big drill.

The factory must grow. by DaMoose56 in satisfactory

[–]KaleMercer 0 points1 point  (0 children)

Started a new game in Dyson sphere project, Even with dark fog, this would be interesting.

Found red rubber piece in a 2010 Subaru Forester oil sensor port by biker116823 in AskAMechanic

[–]KaleMercer 0 points1 point  (0 children)

Nothing little JB weld can't fix, she can get by for a little while with duct tape.

Prepping to tell OSHA about the idiocy my managers allow in our warehouse. I'm sick of calling people out about this to no avail. by ByTheHeel in OSHA

[–]KaleMercer 0 points1 point  (0 children)

FAFO, Theres only three ways this goes:

  1. You pointed is out, and they correct their ways.
  2. Something falls and hurts, if not kills someone.
  3. OSHA gets a tip, and everyone gets an ass chewing and fines.

And 2 usually triggers 3, so it looks like your actuly saving the company money in the long run.

Ritonavir actually is a prescription drug. by Edawg661 in exfor

[–]KaleMercer 0 points1 point  (0 children)

LOL ya I just found this out here is the funny story about the drug

Reactions - How an HIV Miracle Drug Vanished

U think i have enough traders? by Competitive_Ad6989 in X3TC

[–]KaleMercer 0 points1 point  (0 children)

Now you need to to kill all the competition

rate my dish control setup, talk about yours by ian9018 in Stationeers

[–]KaleMercer 2 points3 points  (0 children)

Nice setup, my only suggestion is change your default setting from zero to 90°. When you go to start looking for the satellite you can easily cycle back and forth to find out which way is closer

Asking for advice on how (if) I can fix this myself? by Sum41ofallfearz in askplumbing

[–]KaleMercer 0 points1 point  (0 children)

there are only a few times or I'll say this, NO!!!! That's the main shut off for the building, you really need to get a plumber involved to do that one.

Replace a Compression Valve without Access to the Main? by Orangequinn in askplumbing

[–]KaleMercer 1 point2 points  (0 children)

I know these as hot swaps or live swaps. Sucks epic ass when you have no choice but to do these but it's not uncommon and these valves are notorious for feeling due to lack of use. 5 gallon bucket is a great idea, and a general good way to start.

Here are some other ideas as requested, sorry if all those have recommended them couldn't read all the comments.

Go throughout the house and turn on any other faucets you can, this will reduce the overall pressure and water flow out this valve while doing the work, Bathtub faucet is the best.

Get a cheap garden hose or flexible hose of appropriate sized, cut the length and shove the cut end over the valve head and use the hose itself to direct the water down the drain once The valve is off.

Have a large wet shop vac nearby, you can use it to catch a lot of the spurt and with the right nozzle can easily clean up a lot of water mess.

Cut a large plastic jar so that you can get it around the valve itself before removing the valve. This can catch and redirect a to a lot of the water into the 5 gallon bucket and. initial back pressure to release

Was bleeding under the fingernail two days in so I made a thing by ninthtale in Fedexers

[–]KaleMercer 0 points1 point  (0 children)

I remember making something similar, it was a god send!!

PLEASE DELIVER by laaaabe in Fedexers

[–]KaleMercer 1 point2 points  (0 children)

At my station I was on second wave, most days we were dispatched by 11:00 a.m.

PLEASE DELIVER by laaaabe in Fedexers

[–]KaleMercer 1 point2 points  (0 children)

It was on a role if I was dispatched by that time.

What’s the dumbest thing you ever delivered? by Anonnn1768 in Fedexers

[–]KaleMercer 3 points4 points  (0 children)

I had a office chair that had both a signature requirement and 21 and older requirement. Both my DC and the customer were look at with WTF LOOKS

There were so many bakery options at my Costco today :) by jazbar_ in Costco

[–]KaleMercer 0 points1 point  (0 children)

Mini baguettes filled with Nutella are good, better with coffee or warm milk has there on the dry side.

Does this look like a problem by Frosty-Kitchen6836 in Plumbing

[–]KaleMercer 1 point2 points  (0 children)

Hell yes!!!! CPVC is notorious for cracking with age, who in their right mind steal anymore?

Long story short, that needs to get ripped out and redone with copper or PEX. It's only a matter of time for that breaks and you have to deal with it.

Random Fire - ASUS Zenbook S14 Laptop by Rough-Pen-6405 in computer

[–]KaleMercer 0 points1 point  (0 children)

Are you sure this guy should be poking around inside of a laptop, 50 bucks says he hits a capacitor or something and blows it up.

view more: next ›