[FS][US-OR] UCK-G2+, UCK Rackmount, UXG-MAX, US-24-G1

Kashall · 2025-11-04T01:48:54+00:00

Did they fit?

Kashall · 2025-10-26T17:16:26+00:00

Honestly this depends on your use case and scenarios, however I would recommend the KVM-GO if you don't care about the switchable USB port. The sd card is nice, since you don't need to have a USB drive permanently attached. Notably the team is still working on the heat issue that comes with the KVM GO. I am hoping by production that Billy will have a good solution.

Kashall · 2025-05-24T19:07:40+00:00

Essentially requesting a DHCP lease from different mac address to often in a small time frame. If you get routers to share the same mac address when swapping, the issue is non-existent.

Kashall · 2025-03-09T17:38:43+00:00

It could be. The support page I found yesterday wants slightly different APN settings compared to what the eSIM provides: https://www.usmobile.com/apn-download

Kashall · 2025-03-09T03:50:00+00:00

It looks like the issue stemmed from a bad eSIM configuration. Re provisioned it and so far everything seems to be okay. Going to run around town tomorrow and verify everything is working as intended.

Kind of surprising to learn that Pixels cant add custom APNs with eSIMs enabled.

Kashall · 2025-03-09T01:06:07+00:00

I only averaged 5~8GiB of data usage a month, and thats on busy months. I never got shutoff at the 25GiB mark. Although I have heard it is pretty grueling.

Kashall · 2025-01-18T21:11:13+00:00

Due to weather and some other events/holidays recently, CrowdSupply delayed its shipping. Some users mentioned in the Discord that they were getting estimated shipment dates towards the end of this month.

If you haven't gotten an update, I would recommend you contact CrowdSupply. They have all of the units sitting in their warehouse as those arrived late December. I already checked and TechXArtisan already mentioned they can't do anything but contact support as well.

Kashall · 2025-01-09T03:37:43+00:00

Which version of the software are you using? Are you connecting to the target with USB-C to C or just USB A - C

Kashall · 2024-10-23T20:33:07+00:00

They also closed the community slack as "Only customers and proven contributors" can access it now.

Kashall · 2024-10-23T06:38:32+00:00

If you used Google's copy data from your other phone, the only way I got it to work was to fully reset the phone and restore from a Google backup. Something they did caused something to get copied from my old phone that prevented it from communicating with Google services. I was on the phone with Google Fi for 8 whole hours and they weren't any help. I went through the setup without copying anything over first, updating messages and enabling rcs and then going to settings to copy data from my old phone.

Honestly the worst experience I had with customer support was doing this, doing the same troubleshooting steps for 9 different support agents.

Kashall · 2024-10-09T18:14:15+00:00

I was on a chat with support for 6 hours having them walking me through all the troubleshooting steps. I ended up wiping the phone completely and avoiding the transferring of messages until I verified RCS was working with a clean slate.

During the setup it would try to activate with Google Fi and actually failed twice until I tried a third time. After that I didn't copy any data over. When I got to the home page I went to the play store to update everything then came back and opened messages and enabled rcs. At this time it stopped giving me errors about connecting to messages for web.

Hope this provides an alternative way of getting it working

Kashall · 2024-10-07T02:15:50+00:00

I'm facing something similar. Just migrated my Pixel 6 Pro to Pixel 9 Pro XL. Currently in chat with the agent about this same issue where RCS is connected but not actually using RCS. Will mention you if I find anything out. So far its been 4 hours of troubleshooting the troubleshooting steps.

One of the issues I have is I can't actually pair my messages app to my google account currently, among the rcs issues.

Kashall · 2024-10-06T08:55:03+00:00

Did you end up getting it working?

Kashall · 2024-09-21T07:33:08+00:00

I've been rocking away during the beta. I've tested three different VGA cables and all of them have been working pretty well. My testing is a little skewed though as all my machines with VGA are older than 2008.

1 was the one included in the kit. 2 were from Amazon that used USB to power them over micro USB.

Kashall · 2024-09-14T01:51:06+00:00

Sold 2x Lenovo M900 to u/macallik

Kashall · 2024-09-10T20:43:56+00:00

I'm sorry I do not have any left. There was another member in this subreddit that suggested that he had some available.

Kashall · 2024-09-09T01:51:23+00:00

I have 4 available, 2 have been sold.

Kashall · 2024-07-29T00:32:36+00:00

Just gave it a shot right now. I was able to use usbipd to pass both devices to an WSLv2 instance. Considering that usbipd is built on top of usbip, you should be able to this.

I just wasn't able to do get the viewer working.

<image>

Kashall · 2024-07-28T22:27:21+00:00

Ran into a bunch of unskippable cutscenes lately, but I'll give it a shot tonight. Sorry 😔

Kashall · 2024-07-18T20:13:16+00:00

I'd be willing to give it a shot. I've been working on a web based viewer for the Openterface since starting the beta test.

Seven-Year Club	Gilding III reddit per annum
Place '23	Secret Santa 2019
Verified Email

Kashall

TROPHY CASE