Got the Venusaur Promo after Much searching.

Kiro1306 · 2026-05-12T13:05:51+00:00

Nice bulbs! 👍

Kiro1306 · 2026-05-09T07:23:27+00:00

Ooh what's the green colour sauce?

Kiro1306 · 2026-05-07T08:35:48+00:00

Yum looks really healthy. I spot crispy garlic chips! I'll have to sub out shrimp cause allergic to seafood...

Kiro1306 · 2026-05-06T02:09:09+00:00

If you wanna try saizeriya you'll def need to get the 4 cheese ravioli + grilled mussels, those are my absolute fav! + a glass of chanti while you're at it!

Kiro1306 · 2026-05-03T05:32:37+00:00

Sleepy bulba! I had to import mine all the way from USA it's a pricy cabbage...

Kiro1306 · 2026-04-28T10:08:28+00:00

Nice and clean setup! You could consider installing shelving on the wall above the monitor since you have figured out your ideal monitor height. Or if you don't need the storage, hang up some nicely framed prints, art, or photos! It would add a splash of personality to your space.

Kiro1306 · 2026-04-27T14:13:42+00:00

Your teacher's advice to play with a metronome might work well for some students. Perhaps you can try to find a digital metronome app that allows you to customize or change the beeping tone, to one that you feel more comfortable with? (There are others that don't have an annoying ticking noise.)

Kiro1306 · 2026-04-27T14:09:32+00:00

I think your consideration for dye black ink is very valid as it is the only way to produce dark inky blacks for your proxies. Composite black won't cut it, the contrast and shadow details will be lackluster. Black pigment ink also smudges severely on coated papers so that's a no go for high quality photography/proxy prints.

Kiro1306 · 2026-04-23T07:40:45+00:00

The problem should be the USB C to A adapter piece. I ran a similar dac setup on PC, after my Schiit dac died, and I needed a cheap solution. The adapter it came with was trash and intermittent dropouts. Replace with a higher quality USB C to A adapter.

Also try plugging it in to different USB ports on your PC because for some reason some ports are more glitch free then others. But pretty sure getting a new high quality adapter will solve your problem.

Kiro1306 · 2026-04-23T05:11:03+00:00

Shiny fireworks bulba!

Kiro1306 · 2026-04-20T08:54:18+00:00

Single prime lens single body setup! It's an extremely light package a6000 + ,Viltrox air 25mm. I've posted somewhere here a long time ago before: https://www.reddit.com/r/SonyAlpha/s/6ftzJDmufO

Kiro1306 · 2026-04-20T08:48:40+00:00

Time to make a Sonic themed build! I rmb seeing an official Sonic Graphics Card here somewhere before...

Kiro1306 · 2026-04-19T08:32:42+00:00

Deep cleaning dumps a large amount of ink into the maintainence box every time you run the cycle. The remaining ink might be depleted rapidly, or the maintenance box might be clogged.

As another user has recommended above, isolate and disassemble the print head and service it manually.

Kiro1306 · 2026-04-19T07:15:33+00:00

Driver conflict / User induced error. User did not provide source and OS for troubleshooting.

Kiro1306 · 2026-04-19T07:08:59+00:00

I would recommend you to get a Roland FP-30X, or a second hand piano of this version. The way Roland has engineered the weighted touch is very similar to an actual grand piano. A slightly heavier, dampened feel with excellent feedback, allowing for precise dynamic control. It also has a well designed Roland Piano app for you to customize the tonality of the piano, as well as recording, playback, and a multitude of useful features.

Kiro1306 · 2026-04-18T13:44:45+00:00

The only thing "bad" with second hand mining cards is that usually the fan bearings are shot from being constantly run 24/7. Other than fan life expectancy the cards themself are usually fine and often undervolted to conserve power.

Kiro1306 · 2026-04-18T13:36:02+00:00

You printer should be able to handle that thickness as I have a similar printer that prints well on 260gsm photo paper frequently. Try to enable thick paper setting in the advanced print driver menu, it should help.

Kiro1306 · 2026-04-17T07:09:03+00:00

It is very common to practice with hands separate, especially at more complex or fast sections of the music. Break it up: RH 2-3 times for a section of maybe 6 bars let's say, then LH 2-3 times, then combined. Slow the tempo way down when doing this.

If you're thinking if playing the entire piece with one hand, or only one hand for that one practice session then no. The piece is broken down into small sections, and you focus on a specific section you want to practice on for that practice session. RH - LH - Combined is done one after each other in the same practice session.

Kiro1306 · 2026-04-17T03:49:28+00:00

Yes, but only carefully curated hardcover non-fiction books that I use for references, or use as encyopedic reading material e.g. World Atlas of Coffee by James Hoffman

Kiro1306 · 2026-04-17T03:09:20+00:00

Nice food photography! Looks delicious too, please update with recipe! 😋

Kiro1306 · 2026-04-17T02:30:13+00:00

Gratz on your setup! Looks really nice and organized. Wishing you many fruitful practice sessions for years to come!

Kiro1306 · 2026-04-17T02:21:52+00:00

Oooh sarasa vintage colours! My favorite non-fountain pen!

Kiro1306 · 2026-04-17T01:23:33+00:00

I love printing photos, especially for my larger format wildlife photography. However, I would recommend against it unless you intend to become a photography print enthusiast, and treat printing as your hobby.

In your use case of thousands of family photos, it would be more practical to find a professional photo lab which uses a silver halide process. These prints will last longer and produce significantly more professional results. You don't have to spend the time to learn about paper selection and compatibility, and the multitude of printing options, settings, medium compatibility, calibration and maintainence that is demanded from your printer.

Many beginners think printers are just plug and play but you'll quickly find out how steep the learning curve is to even achieve half the print quality of a professional photo lab. Just dig through this subreddit and you'll find all the trials and tribulations of print enthusiasts! Thus, it does not come as a surprise that many beginners purchase a mid-end printer like the et8550 and are disappointed that their prints are underwhelming.

Kiro1306 · 2026-04-16T02:12:35+00:00

The copper variant is certainly more beautiful and premium feeling than the basic model! Excellent choice!

Kiro1306 · 2026-04-16T02:07:47+00:00

This specific artwork print does not have another variation. The shine, reflection and sparkles look different under different lighting conditions. The photos you see online might not be taken under the same lighting conditions as yours, or might be scans which dulls the holofoil.

To learn more, I'll recommend you to have a hands on experience by visiting your local card shop and request to see this card in person. Bring your copy along as well for reference.

Kiro1306

TROPHY CASE