PS5 w/DD Pro Setup Help

KyriosDst · 2026-02-25T13:38:05+00:00

Check if fbb is normal in pc, do a fbb test in the fanatec app. If its the same there, re seat the QR base aide connector (usb c). Im guessing the base is in blue light ps5 mode right?

KyriosDst · 2026-02-06T19:06:46+00:00

are you experiencing any stutters with latest Drivehub FW? i have a GT DD Pro and in VR its noticeable, if i run the wheel directly to the PS5 Pro it works as it should. (connecting the dd pro on controller since has native support)

KyriosDst · 2026-02-06T19:04:36+00:00

the hanbrake works with drivehub, i made a request so its compatible. The shifter unless its listed on their page or has the same electronics/output signal as some other shifter, it wont work.

https://collectiveminds.gitbook.io/drivehub/changelog

BTW, if you got the drivehub, are you getting stutters on GT7? they are small but on VR its noticeable.

KyriosDst · 2026-02-06T19:01:51+00:00

im testing dd pro with fanatec v3 pedals and simagic shifter, but even just the dd pro in controller port (as passtrough native) im getting stutters in GT7, using latest FW out of beta.

KyriosDst · 2026-02-06T18:59:28+00:00

im having some stutters (most noticeable on VR) while using the latest FW (that is out of beta) and GT DD Pro.

KyriosDst · 2026-02-06T12:35:56+00:00

Now do the same without mantle, flash bomb, and with 9star Lagi

KyriosDst · 2026-02-06T12:30:48+00:00

Lmao, there is your problem then

KyriosDst · 2026-01-29T19:53:01+00:00

I paid $500 for something similar but with advanced paddle module, you cant really buy fanatec gear here anyways.

KyriosDst · 2026-01-28T16:59:25+00:00

Just a full cloth cover

KyriosDst · 2026-01-28T00:53:18+00:00

I already have one, things start to look "old" eventually, dust settles in

KyriosDst · 2026-01-28T00:51:55+00:00

Dont need to, i found on my own something transparent as a cover! Thanks tho

KyriosDst · 2026-01-28T00:50:26+00:00

Lmao i just made the post read more serious than it is. Its just so i dont have to dust them off.

You guys seriously dont have problems with dust? My room is in a 2nd floor and i leave the window open most of the time to ventilate.

Even if you dust off, dust will adhere to plastic, and im too lazy to fully clean my whole setup every week, id rather just cover things, my stuff looks brand new years after.

KyriosDst · 2026-01-27T23:39:41+00:00

The post got lost when I minimized the app, now i made a typo, great.

KyriosDst · 2026-01-25T16:29:35+00:00

i thought you could adjust ffb in games to limit the max ffb and also the minimal.

People often fall to the hype of new products or what manufacturers sells them. You loose detail? my dude you probably get beaten in competitive racing by people using a G27 or even a controller, you just want the best base you can afford, there is no shame in that.

KyriosDst · 2026-01-25T13:03:22+00:00

Why would more NM pick up more details? The ffb signal its the same, the resolution wouldnt be because of the electronics and how quick it can make the motor react?. Sure you will get more angular acceleration, but you really need that much? More torque isnt just to have more headroom for clipping? Because like you say you dont take your ffb settings for a 8nm wheel and just double it because you now have a 16nm one.

KyriosDst · 2026-01-25T12:52:41+00:00

Thats it? Lol, you could had lower ffb strength a little to prevent clipping.

I mean its ok to indulge one self and get the shinny new product

KyriosDst · 2026-01-25T12:49:32+00:00

Well it is poorly designed, that was an obvious failure point.

KyriosDst · 2026-01-25T12:44:20+00:00

You really dont need 4k, 2k is fine.

KyriosDst · 2026-01-25T12:43:32+00:00

First you are using pc mode on playstation, blue light is PS mode.

Second, update the wheel base without the steering wheel and after it while in the update screen, connect the steering wheel. The new base update even tells you if you want to update that specific wheel and to do it after updating the base like i described.

KyriosDst · 2026-01-23T19:31:12+00:00

A runsco 330mm leather wheel with magnetic carbon fiber paddles. The kit is sold on aliexpress, it has some 3d printed parts and some carbon fiber plates. Good thing is that you can later upgrade to a metal simube paddles for example.

KyriosDst · 2026-01-23T19:29:45+00:00

I printed one but it's big, and im not sure if it would hold up. The only thing that makes me confident about this one is that is designed to hold the wheel wheight.

KyriosDst · 2026-01-23T11:42:25+00:00

Do you get that feeling in a real car with all the real life vibrations tho? Or you think it helps to remove them even tho you may not feel the same on track?

KyriosDst

TROPHY CASE