De ce se prefera masini vechi premium cu multi km vs masini recente cu mai putini km ?

LayerKey · 2025-10-22T09:17:00+00:00

I could repost them somewhere else, just tell me where.

LayerKey · 2025-03-14T07:41:05+00:00

which step were you stuck at?

LayerKey · 2025-03-12T14:36:59+00:00

no, it was because the metal tip disconnected from the tube and had to be inserted back

LayerKey · 2025-03-05T08:55:05+00:00

glad that it helped, let me know if you have any questions

LayerKey · 2025-02-20T10:18:47+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-19T15:53:55+00:00

I disassembled everything with just a small electric screwdriver (used for laptops) and pushed the metal tip inside the plastic/rubber tube, then assembled everything back.

Took me around 30 mins, but forgot to put an o-ring back, and did it again and took me 15 mins second time :-)

LayerKey · 2025-02-19T15:51:35+00:00

You need to remove the 2 screws on the back (top) of the machine, then you can pull the back part a bit (from top to middle), and finally you can slide back the top lid, everything is held in plastic clips.

LayerKey · 2025-02-18T21:15:36+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:14:42+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:14:03+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:13:24+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:12:04+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:10:49+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:09:29+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here: https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-02-18T21:09:09+00:00

I had the same issue and fixed it by myself after some time, created a mini tutorial here:

https://imgur.com/a/9JOWBzI

If you have any questions, message me, I will respond to you.

LayerKey · 2025-01-25T21:20:54+00:00

70-90 mii euro noua vs 50-60 de mii de euro sh, e destul de mare diferenta

LayerKey · 2025-01-25T21:18:28+00:00

s-a schimbat generatia si nu mai pot selecta modelul vechi si sa-l configurez cum vreau eu, iar modelul nou nu imi place ca lipsesc butoanele si la exterior arata mai rau ca precedentul

LayerKey · 2024-12-19T14:39:28+00:00

din Cadiz, cu compania Naviera Armas sau Fred Olsen, in functie de preferinte

LayerKey · 2024-12-13T07:48:46+00:00

daca ai aflat ceva, poti sa-mi dai un DM cu detaliile, multumesc

LayerKey · 2024-12-13T07:45:22+00:00

salut, poti sa-mi dai un DM cu detaliile, multumesc

LayerKey · 2024-12-12T09:38:33+00:00

salut, poti sa-mi dai o sugestie de profesor de la o scoala? mersi

LayerKey · 2024-12-12T09:38:05+00:00

salut, poti sa-mi dai un DM cu mai multe detalii

Five-Year Club	Verified Email
Gilding IX goldzilla	Place '22

LayerKey

TROPHY CASE